V-ZUG 301 Installation guide

V-ZUG
Brand
V-ZUG
Model
301
Category
Coffee making accessories
Type
Installation guide

V-ZUG 301 is a versatile kitchen appliance that combines the functionality of a coffee maker and a steamer. With its sleek design and compact size, it's a perfect fit for modern kitchens.

The V-ZUG 301 offers a range of features to make your coffee and steaming experience effortless and enjoyable. It has an intuitive control panel that allows you to easily select your desired settings, including coffee strength, temperature, and steam level. The appliance also features an automatic shut-off function for added safety and convenience.

V-ZUG 301 is a versatile kitchen appliance that combines the functionality of a coffee maker and a steamer. With its sleek design and compact size, it's a perfect fit for modern kitchens.

The V-ZUG 301 offers a range of features to make your coffee and steaming experience effortless and enjoyable. It has an intuitive control panel that allows you to easily select your desired settings, including coffee strength, temperature, and steam level. The appliance also features an automatic shut-off function for added safety and convenience.

Installation instructions
Coffee-Center
Type of construction 55-381
J301.123-0
6.5.10 ITH
1
These installation instructions apply to the model: 301
Identification plate
A Open operating panel. The identification plate is on the right-hand side next to the coffee bean holder.
Dimensions
External dimensions (H × W × D): 378 × 548 × 326 mm
A Information on the necessary mains voltage, type of current and fuse protection can be taken from the identification plate.
Built-in solo
1. Slide mounting frame B forwards until flush with the front of the cabinet.
2. Fasten mounting frame on the left and right-hand sides with 2 countersunk chipboard
screws S1 4.0 × 20 on each side.
3. Insert power socket into wall socket.
4. Slide appliance without drip tray A between installation angles on the ground.
5. «Detailed installation», see page 2.
The appliance should be installed by qualified personnel only. Each step must be carried out and checked in full in the order
specified.
Validity
General notes
If fitting in flammable material, the guidelines and standards for low voltage installations and for the fire protection must be
strictly observed.
Electrical connections
Electrical connections must be carried out by trained electricians in accordance with the guidelines and standards for low
voltage installations and the specifications of the local electricity supply companies.
A plug-in appliance may only be connected to a socket outlet with earthing contact, installed according to specifications. An
all-pole mains isolating device with 3 mm contact opening should be provided in the house wiring system. Switches, plug and
socket devices, circuit breakers and fusible cut-outs which are accessible after installation and which have all-poles switching
are permissible as isolating devices. Effective earthing and separately installed neutral and earth conductors ensure safe and
fault-free operation. After installation, live parts and cables with basic insulation must not be accessible. Old installations should
always be checked.
Installed in tall unit
550
381
80
50
B
S1
A
605
Installation instructions
Coffee-Center
Type of construction 55-381
J301.123-0
6.5.10 ITH
2
1. Punch 3 holes on both the left and right-hand niche walls for chipboard screws S2
4.0 × 12 (drill template).
2. Fix both support angles C with the enclosed screws S2.
3. Slide mounting frame B onto support angles and slide forwards until flush with the
front of the cabinet.
4. Fasten mounting frame on the left and right-hand sides with 2 countersunk chipboard
screws S1 4.0 × 20 on each side.
5. Insert power socket into wall socket.
6. Slide appliance without drip tray A between installation angles on the ground.
7. «Detailed installation», see below.
1. Open service door D using the handle on the left behind the cover.
2. Loosely screw in 2 screws S3 M4 × 8 at the bottom left and right.
3. Close service door.
4. Open operating panel by pressing on handle strip E.
5. Loosely screw in screw S4 M4 × 8 at the top using socket screw key F.
6. Use adjusting screws S5 to adjust the height of the front, if necessary (gap width, front alignment flush).
7. Firmly screw in screws S3 and S4.
8. Replace drip tray A.
Coffee-Center & oven Coffee-Center & steamer
Detailed installation
550
381
1143
A
B
S1
S2
C
567
548
759
605
381
762
A
B
S1
S2
C
567
548
378
605
550
420
S3
D
E
S5
S4
E
F
S3
S5
  • Page 1 1
  • Page 2 2

V-ZUG 301 Installation guide

V-ZUG
Brand
V-ZUG
Model
301
Category
Coffee making accessories
Type
Installation guide

V-ZUG 301 is a versatile kitchen appliance that combines the functionality of a coffee maker and a steamer. With its sleek design and compact size, it's a perfect fit for modern kitchens.

The V-ZUG 301 offers a range of features to make your coffee and steaming experience effortless and enjoyable. It has an intuitive control panel that allows you to easily select your desired settings, including coffee strength, temperature, and steam level. The appliance also features an automatic shut-off function for added safety and convenience.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents