V-ZUG Miwell V400 Installation guide

V-ZUG
Brand
V-ZUG
Model
Miwell V400
Type
Installation guide

This manual is also suitable for

V-ZUG Miwell V400 is a 3-in-1 appliance that combines a microwave, convection oven, and steamer. It offers a variety of cooking options, including reheating, defrosting, grilling, baking, and steaming. The Miwell V400 also features a number of automatic programs that make cooking easier, such as the sensor cooking program, which automatically adjusts the cooking time and temperature based on the type and amount of food you are cooking. Additionally, the Miwell V400 has a self-cleaning function, which makes cleanup a breeze.

V-ZUG Miwell V400 is a 3-in-1 appliance that combines a microwave, convection oven, and steamer. It offers a variety of cooking options, including reheating, defrosting, grilling, baking, and steaming. The Miwell V400 also features a number of automatic programs that make cooking easier, such as the sensor cooking program, which automatically adjusts the cooking time and temperature based on the type and amount of food you are cooking. Additionally, the Miwell V400 has a self-cleaning function, which makes cleanup a breeze.

Installation instructions
Microwave
Type of construction 55-381
J24001113-R02
10/04/2018
J24001113-R02
1
The appliance should be installed by qualified personnel only.
Each step must be carried out and checked in full in the order specified.
Validity
These installation instructions apply to the models:
24001, 24003
General notes
If installing into a combustible material, the guidelines and standards for low voltage installations and fire protection
must be strictly observed.
Identification plate
▸ Open the appliance door.
– The identification plate is located on the left-hand side of the cooking space.
Dimensions
External dimensions (H×W×D): 378 × 548 × 320 mm
Cooking space dimensions (H×W×D): 187 × 370 × 290mm
Electrical connections
Electrical connections must be carried out by qualified personnel in accordance with the guidelines and standards
for low-voltage installations and the specifications of the local electricity supply companies.
A plug-in appliance may only be connected to a socket outlet with earthing contact, installed according to specifications. An
all-pole mains isolating device with 3 mm contact opening should be provided in the house wiring system. Switches, plug and
socket devices, circuit breakers and fusible cut-outs which are accessible after installation and which have all-poles switching
are permissible as isolating devices. Effective earthing and separately installed neutral and earth conductors ensure safe and
fault-free operation. After installation, live parts and cables with basic insulation must not be accessible. Check old installa-
tions.
▸ The appliance is designed for use up to a max. altitude of 2000 m above sea level.
▸ Refer to the identification plate for information on the required mains voltage, current type and fuse protection.
The mains plug must not be cut off.
Installation
Minimum installation height: Observe distance of 850mm between floor and bottom edge of microwave!
Notes
▪ The appliance must not be installed directly over a cooking area.
▪ Supply air must be guaranteed at all times.
▪ When installing in a tall unit, a ventilation cross-section of at least 110cm² must be guaranteed.
Installation instructions
Microwave
Type of construction 55-381
J24001113-R02
10/04/2018
J24001113-R02
2
Installation in wall unit
2050 *
=
=
M
550
381
762
B
548
378
320
330
S2
530
90°
M
210
40
S1
S1
30
S3
W1
S2
* from the floor
1. Produce 2 holes on the left and right in the niche walls for chipboard screws S1.
C
30
2. Screw assembly kit M on the left and right with the S1 screws provided.
3. Plug connection cable B into power socket. Slide appliance on assembly kit M into
niche with around 5 cm protruding.
4. Secure retaining strap W1 on left and right onto appliance from below with S3 screws
(zinc-plated).
5. Slide appliance on assembly kit M flush into niche.
6. Secure appliance on left and right with S2 screws (white).
7. Guide stop bracket C (adjustable: 320–350mm) up to wall, then tighten.
Installation instructions
Microwave
Type of construction 55-381
J24001113-R02
10/04/2018
J24001113-R02
3
Installation in tall unit
Microwave & oven
Oven with drawer
Microwave & oven
Oven without drawer
M
548
320
567
605
550
≥110 cm
2
≥20
759 378
1143
381
S1
B
S2
M
567
548
320
605
550
≥ 110 cm
2
≥ 20
598 378
981 *
381
S2
B
S1
* If adjustment to niche height of 1016mm is needed,
use additional height adapter 35mm (see J715.050)
1. Produce 2 holes on the left and right in the niche walls for chipboard screws S1.
S3
W1
S2
2. Screw assembly kit M on the left and right with the S1 screws provided.
3. Plug connection cable B into power socket. Slide appliance on assembly kit M into
niche with around 5cm protruding.
4. Secure retaining strap W1 on left and right onto appliance from below with S3 screws
(zinc-plated).
5. Slide appliance on assembly kit M flush into niche.
6. Secure appliance on left and right with S2 screws (white).
Standalone installation Installation above
normal oven
Installation above
extractor oven
D Normal oven / tall unit
≥ 20
≥ 20
≥ 20
G G
D E
F
G
E Oven / extractor oven
F Aluminium flexible hose well stretched
G Ventilation cross-section of at least
110cm²
  • Page 1 1
  • Page 2 2
  • Page 3 3

V-ZUG Miwell V400 Installation guide

V-ZUG
Brand
V-ZUG
Model
Miwell V400
Type
Installation guide
This manual is also suitable for

V-ZUG Miwell V400 is a 3-in-1 appliance that combines a microwave, convection oven, and steamer. It offers a variety of cooking options, including reheating, defrosting, grilling, baking, and steaming. The Miwell V400 also features a number of automatic programs that make cooking easier, such as the sensor cooking program, which automatically adjusts the cooking time and temperature based on the type and amount of food you are cooking. Additionally, the Miwell V400 has a self-cleaning function, which makes cleanup a breeze.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents