2. Kyosho
  3. MXW001R Aluminum Link Rod Set(WB110mm)

Kyosho MXW001R Aluminum Link Rod Set(WB110mm) User manual

  • Hello! I am an AI chatbot trained to assist you with the Kyosho MXW001R Aluminum Link Rod Set(WB110mm) User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Hex Wrench
Remove 4 lower links as shown in the figure.
Loosen 1 turn of M3x3 set screws.
Note direction
Replace collar and put back
upper arm.
Phillips Driver
Hex Wrench
MX019
Set Screw M2x8
MX019
MX019
MX019
MX019
MX019
1-S02006
Bind Screw M2x6
MX007
Bind Screw M2x12
MX007
MXW001R
Collar 4x2mm
1-S02006
1-S02006
1-S02006
Installing Collar
1.5
mm
0.9
mm
Do not over tighten!
MX019
TP Button Head Screw Pin 1.4x15mm
R
THE FINEST RADIO CONTROL MODELS
INSTRUCTION SHEET
No.MXW001R
Before installation, please carefully read and follow the instructions on this
sheet in conjunction with the instruction manual in your MINI-Z 4x4 Series.
Tools required
1
for MINI-Z 4x4 Series WB110mm
Aluminum Link Rod Set (WB110mm)
2
Before beginning assembly, please read these instructions thoroughly!
Align both ends to each other.
Drive shaft is returned as shown in the figure.
Align 3 grooves.
Front
Short
Hex Wrench
MX007
MX017
MX007
MX007
6mm
Remove and assemble as shown in the instruction.
Install 4 lower links are put together as shown in the figure.
MXW001R
Set Screw M2x12
MXW001R
Link Rod 3x15.8mm
MXW001R
Link Rod 3x19.7mm
S x2
x8
L x2
Long
MX019
Set Screw
MX019
MX019
MX019
Hex Wrench
Screw in the set screw while pressing the
part shown above with needle-nose pliers.
Hex Wrench
Tighten 1 turn of M3x3 set screws, after inserting pins.
1-S02006
MX019
0.9
mm
0.9
mm
1.5
mm
x4
3
4
81852006-1 PRINTED IN JAPAN
243 -0021
046-229-4115
13001800
© Copyright 2020 KYOSHO CORPORATION /
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
www.kyosho.com
/