JB-BA-100i JayBird Bluetooth® Adapter for iPod User Guide
User Manual Specs:
• 3.5” wide by 5.5” tall
• One color on white paper (black ink)
FRONT COVER
JB-BA-100i
JayBird Bluetooth® Adapter for iPod
Easy-step Instructions
[JayBird Logo]
For use with the JB-100 JayBird Bluetooth® Stereo Headset
[image or line drawing of headset]
[Made-For-iPod logo]
COPY (starting on the inside cover)
Introduction:
The JayBird Bluetooth® Adapter for MP3 enables any compatible iPod® (see list
below) to transmit stereo audio to your JB-100 JayBird Bluetooth® Stereo
Headset (up to a 30 foot range).
The JayBird Bluetooth® Adapter for iPod is compatible with the following iPod®
models:
• iPod Nano
• iPod with video (5G)
• iPod mini
• iPod (4G, photo)
The JayBird Bluetooth® Adapter for iPod is powered by the iPod once connected
to the iPod dock connector, so no batteries are required.
.
JB-BA-100i JayBird Bluetooth® Adapter for iPod User Guide
Pairing the adapter with your JayBird Bluetooth® Stereo Headset
1. Plug the adapter into the iPod® Dock Connector. The LED should be
facing UP (same side as the front of the iPod®)
2. Turn the iPod® on and start playing music. The LED on the adapter will
be steady blue color while it is in search mode.
3. Make sure that your headset is turned off.
4. Put the headset into pairing mode by pressing the POWER/TALK button
on the headset until the LED on the right earpiece blink alternating red and
blue colors.
5. The adapter LED will flash blue once it start to pair with the headset.
6. Once the headset finds and pairs with the adapter, both the adapter and
headset LEDs will blink blue (the headset will blink blue every six seconds
and the adapter LED will blink blue every 2 seconds). Your headset and
adapter are now paired.
Listening to Music
1. Once paired, all you need to do is plug in the adapter to the iPod® dock
connector, turn on your headset, and play music. You will hear the music
through your headset.
2. Adjust the volume by using the UP/DOWN buttons on the headset.
Adjusting the volume on the iPod® will have no effect.
3. When not using the adapter, it’s a good idea to remove it from the iPod®
dock connector as it is drawing power from the iPod® and will reduce the
iPod® battery play time.
Using the phone call feature of your JayBird Bluetooth® Stereo Headset
1. The JayBird Bluetooth® Stereo Headset can also be paired with any
compatible Bluetooth® enabled mobile phone. For pairing instructions,
refer to the user manual that came with your headset.
2. Once paired with a mobile phone, you can make and receive phone calls
even while listening to music from your iPod® wirelessly using your
JayBird Bluetooth® Adapter. When a call comes in, you will hear the
phone ring. Answer the call by pressing the TALK button on the headset
(or by pressing the answer button on your phone) and the music will turn
off automatically and you can then take the call. When you done with the
call and have hung up, the headset will switch back to music play. (Refer
to your JayBird Bluetooth® Stereo Headset user manual for detailed
instructions on making and receiving phone calls)
JB-BA-100i JayBird Bluetooth® Adapter for iPod User Guide
TECHNICAL SPECIFICATIONS
Protocol Bluetooth 1.2, A2DP
Frequency Band 2.4 GHz
Tx Power Bluetooth Class 2
Range 10 meters/33 feet
Audio Format 16-bit Stereo
Music Playing Time Draws power from iPod
Battery No battery - draws power from iPod
Charging No charging required - draws power from iPod
Weight:(Grams) 6.5g
Operating Temp 14 F to 113 F (-10° C to 45° C) (subject to change)
Storage Temp -4 F to 131 F (-20° C to 55° C) (subject to change)
AC power supply Not required - draws power from iPod
No of Paired Device 1
Pairing passkey Not required - automatically pairs with headset
Features Power and audio line out from iPod. status LED
Agency Approvals FCC, CE
Included In Box
JayBird Bluetooth Adapter for iPod
User Manual
Compatibility
- iPod Nano
- iPod with video (5G)
- iPod mini
- iPod (4G, photo)
Federal Communication Commission
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
JB-BA-100i JayBird Bluetooth® Adapter for iPod User Guide
can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
IMPORTANT INFORMATION REQUIRED BY THE FCC
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH
MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
/