archgon MH-3231-U3V3 Sphere III User manual

Brand
archgon
Model
MH-3231-U3V3 Sphere III
Category
Interface hubs
Type
User manual

archgon MH-3231-U3V3 Sphere III is a compact and lightweight storage solution for 3.5-inch hard drives. It features a USB 3.0 interface for fast data transfer speeds and is backward compatible with USB 2.0. The device supports UASP technology for enhanced performance with compatible operating systems (Windows 8 / Mac OS 10.8 or above). The anodized aluminum case with a hairline finish provides durability and a sleek look. The LED indicator helps monitor the device's status. It's a plug-and-play device, making it easy to use without the need for additional drivers.

archgon MH-3231-U3V3 Sphere III is a compact and lightweight storage solution for 3.5-inch hard drives. It features a USB 3.0 interface for fast data transfer speeds and is backward compatible with USB 2.0. The device supports UASP technology for enhanced performance with compatible operating systems (Windows 8 / Mac OS 10.8 or above). The anodized aluminum case with a hairline finish provides durability and a sleek look. The LED indicator helps monitor the device's status. It's a plug-and-play device, making it easy to use without the need for additional drivers.

MH-3231-U3V3 Sphere III
3.5” SATA Storage Center
Product MH-3231-U3V3 3.5” SATA Storage Center
Thank you for purchasing 3.5” SATA Storage Center MH-3231-U3V3 from archgon. To
ensure trouble-free use and prolong the life of your device, please read following
instructions carefully and note all precautions.
Box Contents –
1. 3.5” SATA Storage Center x 1
2. USB 3.0 A to B Cable x 1
3. 12V/2A AC Adaptor x 1
4. Screw Pack x 1
5. Stand x 1
6. User Manual x 1
Features –
USB 3.0 SuperSpeed transfer rate (backward compatible with USB 2.0)
UASP technology enhanced
Note：The native USB 3.0 UASP solution is supported under Windows 8 / Mac OS 10.8 or above.
Light weight & compact
LED indicator
Plug & Play
Specifications –
Internal Interface：SATA I / II / III to USB 3.0
Material：Anodized aluminum case with hairline finish
Compatible with 3.5” hard drive
Dimension：193 x 113 x 31 mm
Weight：300 g
OS Compatibility：Internal Windows XP, Vista, 7, 8 or above
Mac OS 10.X or above
Precautions –
Unscrewed or unfastened component may fall or slip off.
Do not let your device get wet
Do not leave it in a damp or high humidity environment or under direct sunlight.
Do not place your device near strong magnetic fields, such as television or radios.
This could damage the storage data.
Do not place the device on an unstable surface where it might drop.
Hardware Installation Guide MH-3231-U3V3 3.5” SATA Storage Center
STEP1: Pull out the HDD tray.
STEP2: Connect the HDD to the SATA connector and screw the HDD to the tray.
Note：Make sure the connector is well connected.
STEP3: Insert the HDD tray to the enclosure and screw the enclosure.
STEP4: Connect the enclosure to PC or notebook with USB 3.0 cable.
Troubleshooting MH-3231-U3V3 3.5” SATA Storage Center
Drive does not appear in my computer / on my desktop
1. Make sure the USB cable and connectors are not damaged and firmly connected by
both ends.
2. Make sure the power adaptor is not damaged and firmly plugged.
3. Check the power switch and LED status and see if it is power-on.
4. Avoid connecting the device via USB hub.
5. Remove the hard drive and then reconnect after 10 seconds.
6. Check the “Device Manager” and see if the hard drive is recognized by USB port.
7. Sometimes there is an unknown conflict between USB devices, connect them one by
one and discover which one is causing the conflict.
My computer won’t boot when I connect the external storage drive to the
computer before booting.
1. Remove all external devices before you turn on computer.
2. Boot into your BIOS and change the boot priority. Make sure the USB boot device is
after your primary hard drive.
Data transfer rate seems slow
1. Make sure this USB 3.0 storage device is connected directly to a USB 3.0 port.
2. If there are other devices connected to the hub, please disconnect the other USB
devices.
3. Your system may be operating at lower speeds due to your system does not support
USB 3.0
Limited Warranty MH-3231-U3V3 3.5” SATA Storage Center
Archgon warrants MH-3231-U3V3 is free from defects in materials or workmanship
under normal use for a period of one (1) year from the date of original purchase.
The limited warranty does not cover upon occurrence of the following events
1. Damages from misuse, accident or any man-caused damages
2. The disassembly or the re-equipping causes the damage arbitrarily.
3. Improper maintenance, leading to product failure or damage.
4. Unsuitable physical or operating environment beyond product specification, leading
to product failure or damage.
For further questions, please write an e-mail to archgon@archgon.com
www.archgon.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

archgon MH-3231-U3V3 Sphere III User manual

Brand
archgon
Model
MH-3231-U3V3 Sphere III
Category
Interface hubs
Type
User manual

archgon MH-3231-U3V3 Sphere III is a compact and lightweight storage solution for 3.5-inch hard drives. It features a USB 3.0 interface for fast data transfer speeds and is backward compatible with USB 2.0. The device supports UASP technology for enhanced performance with compatible operating systems (Windows 8 / Mac OS 10.8 or above). The anodized aluminum case with a hairline finish provides durability and a sleek look. The LED indicator helps monitor the device's status. It's a plug-and-play device, making it easy to use without the need for additional drivers.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents