Panasonic 2SA2161G User manual

Panasonic
Brand
Panasonic
Model
2SA2161G
Type
User manual

This manual is also suitable for

Panasonic 2SA2161G is a Silicon PNP epitaxial planar type transistor designed for high-frequency amplification. It is complementary to 2SC4656G and is characterized by a high transition frequency fT and small collector output capacitance Cob. The transistor is housed in a compact SS-Mini type package, enabling downsizing of equipment and automatic insertion through tape packing.

The 2SA2161G has a maximum collector-emitter voltage of -50V, a maximum collector current of -50mA, and a maximum collector power dissipation of 125mW. It has a minimum collector-base cutoff current of -0.1µA and a minimum collector-emitter cutoff current of -100µA. The forward current transfer ratio (hFE) ranges from 200 to 400, and the collector-emitter saturation voltage is typically -0.3V.

Panasonic 2SA2161G is a Silicon PNP epitaxial planar type transistor designed for high-frequency amplification. It is complementary to 2SC4656G and is characterized by a high transition frequency fT and small collector output capacitance Cob. The transistor is housed in a compact SS-Mini type package, enabling downsizing of equipment and automatic insertion through tape packing.

The 2SA2161G has a maximum collector-emitter voltage of -50V, a maximum collector current of -50mA, and a maximum collector power dissipation of 125mW. It has a minimum collector-base cutoff current of -0.1µA and a minimum collector-emitter cutoff current of -100µA. The forward current transfer ratio (hFE) ranges from 200 to 400, and the collector-emitter saturation voltage is typically -0.3V.

Transistors
1
Publication date: May 2007 SJC00380AED
This product complies with the RoHS Directive (EU 2002/95/EC).
2SA1791G
Silicon PNP epitaxial planar type
For high-frequency amplification
Complementary to 2SC4656G
■ Features
• High transition frequency f
T
• Small collector output capacitance C
ob
• SS-Mini type package, allowing downsizing of the equipment and
automatic insertion through the tape packing.
■ Absolute Maximum Ratings T
a
= 25°C
Parameter Symbol Rating Unit
Collector-base voltage (Emitter open) V
CBO
−50 V
Collector-emitter voltage (Base open) V
CEO
−50 V
Emitter-base voltage (Collector open) V
EBO
−5V
Collector current I
C
−50 mA
Collector power dissipation P
C
125 mW
Junction temperature T
j
125 °C
Storage temperature T
stg
−55 to +125 °C
Parameter Symbol Conditions Min Typ Max Unit
Collector-base voltage (Emitter open) V
CBO
I
C
= −10 µA, I
E
= 0 −50 V
Collector-emitter voltage (Base open) V
CEO
I
C
= −1 mA, I
B
= 0 −50 V
Emitter-base voltage (Collector open) V
EBO
I
E
= −10 µA, I
C
= 0 −5V
Collector-base cutoff current (Emitter open)
I
CBO
V
CB
= −10 V, I
E
= 0 − 0.1 µA
Collector-emitter cutoff current (Base open)
I
CEO
V
CE
= −10 V, I
B
= 0 −100 µA
Forward current transfer ratio
*
h
FE
V
CE
= −10 V, I
C
= −2 mA 200 500
Collector-emitter saturation voltage V
CE(sat)
I
C
= −10 mA, I
B
= −1 mA − 0.1 − 0.3 V
Transition frequency f
T
V
CB
= −10 V, I
E
= 2 mA, f = 200 MHz 250 MHz
Collector output capacitance C
ob
V
CB
= −10 V, I
E
= 0, f = 1 MHz 1.5 pF
(Common base, input open circuited)
■ Electrical Characteristics T
a
= 25°C ± 3°C
Rank Q R
h
FE
200 to 400 250 to 500
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.
2.
*
: Rank classification
■ Package
• Code
SSMini3-F3
• Marking Symbol: AL
• Pin Name
1. Base
2. Emitter
3. Collector
2SA1791G
2
SJC00380AED
This product complies with the RoHS Directive (EU 2002/95/EC).
V
CE(sat)
I
C
h
FE
I
C
C
ob
V
CB
P
C
T
a
I
C
V
CE
I
C
V
BE
0
40
80
120
0
20
40
60
80
100
120
140
Collector power dissipation P
C
(
mW
)
Ambient temperature T
a
(
°C
)
0 −12−10−8−2 −6−4
0
−20
−30
−10
−40
−50
−60
−70
−80
−90
I
B
= −300 µA
T
a
= 25°C
−100 µA
−50 µA
−150 µA
−250 µA
−200 µA
Collector current I
C
(mA)
Collector-emitter voltage V
CE
(V)
0 −0.2 −0.6 −0.8 −1.0 −1.2−0.4 −1.4
0
−50
−30
−40
−20
−10
V
CE
= −10 V
T
a
= 85°C
25°C
−25°C
Base-emitter voltage V
BE
(
V
)
Collector current I
C
(
mA
)
25°C
−25°C
T
a
= 85°C
I
C
/ I
B
= 10
Collector current I
C
(mA)
Collector-emitter saturation voltage V
CE(sat)
(V)
− 0.01
− 0.1
− 0.1
−1
−1 −10 −100
T
a
= 85°C
25°C
−25°C
V
CE
= −10 V
Collector current I
C
(
mA
)
Forward current transfer ratio h
FE
0
600
500
200
100
400
300
−1 −10 −100
0 −40−10 −30−20
f = 1 MHz
T
a
= 25°C
Collector-base voltage V
CB
(V)
Collector output capacitance
(Common base, input open circuited)
C
ob
(pF)
0
0.5
3.5
3.0
2.5
1.0
2.0
1.5
This product complies with the RoHS Directive (EU 2002/95/EC).
SSMini3-F3 Unit: mm
1.00 ±0.05
(0.50) (0.50)
1.60
+0.05
−0.03
0.26
+0.05
−0.02
12
3
0.85
+0.05
−0.03
1.60 ±0.05
0.70
+0.05
−0.03
0 to 0.10
(5°)
(0.45)
0.13
+0.05
−0.02
0.375 ±0.05
(5°)
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other
company which may arise as a result of the use of technical information described in this book.
(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
– Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-
ucts may directly jeopardize life or harm the human body.
– Any applications other than the standard applications intended.
(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita
Electric Industrial Co., Ltd.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Panasonic 2SA2161G User manual

Panasonic
Brand
Panasonic
Model
2SA2161G
Type
User manual
This manual is also suitable for

Panasonic 2SA2161G is a Silicon PNP epitaxial planar type transistor designed for high-frequency amplification. It is complementary to 2SC4656G and is characterized by a high transition frequency fT and small collector output capacitance Cob. The transistor is housed in a compact SS-Mini type package, enabling downsizing of equipment and automatic insertion through tape packing.

The 2SA2161G has a maximum collector-emitter voltage of -50V, a maximum collector current of -50mA, and a maximum collector power dissipation of 125mW. It has a minimum collector-base cutoff current of -0.1µA and a minimum collector-emitter cutoff current of -100µA. The forward current transfer ratio (hFE) ranges from 200 to 400, and the collector-emitter saturation voltage is typically -0.3V.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents