Installation Instructions
SAFETY CHAIN KIT
Part Number:
63035
1. CONNECT THE SAFETY CHAIN TO TRAILER.
2. CROSS THE TWO ENDS OF THE CHAIN UNDER THE COUPLER AND CONNECT TO CHAIN BRACKET ON HITCH.
LOOP THE CHAINS THROUGH THE CHAIN BRACKET AS SHOWN AND CONNECT THE ENDS OF CHAINS USING THE
QUICK LINKS PROVIDED WITH KIT. TIGHTEN THE HEX NUT ON QUICK LINKS.
ALLOW ONLY ENOUGH SLACK TO PERMIT TURNING.
DO NOT CONNECT THE QUICK LINKS DIRECTLY TO THE HITCH CHAIN BRACKET.
Rev. A9-12-0663035NSheet 1 of 1
z 2006 Cequent Towing Products
Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to
prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working
beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5
and SAE J684.
Form: F205 Rev A 5-6-05
1
2
5/16” QUICK LINKS22
72” SAFETY CHAIN11
DESCRIPTIONQTYITEM
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Blue Ox BXW2000 User manual
-
-
Woods DS10.40 Pull Type User manual
-
Toro MMX-655H-S Mortar Mixer User manual
-
Toro MMX-1158H-S Mortar Mixer User manual
-
-
Harbor Freight Tools 5000 lb. Capacity Adjustable Tow Bar User manual
-
MQ Multiquip MQ600TD80 Specification
-
-