1
2
3
Connect the supplied MW antenna and FM antenna to the respective terminals.
Connect the speaker wires to the SPEAKERS terminals, right speaker to "R" and left speaker to "L", coloured
(marked) wire to "+" and black (unmarked) wire to "–".
Connect the AC power cord to the wall socket.
MW
Speaker
Speaker
1
2
3
SetupSetup
Setting the clock
1
2
3
In standby mode, press and hold CLOCK SET/RDS until clock digits
for the hours flash.
Adjust VOLUME to set the hours and then press CLOCK SET/RDS again
until the clock digits for the minutes flash.
Adjust VOLUME to set the minutes and finally press CLOCK SET/RDS to confirm the time.
VOLUME
INCREDIBLE
SURROUND
PROGRAM
TUNING
ALBUM
PRESET
SOURCE
TIMER SET
DBBDSC
OPEN/
CLOSE
RDS
CLOCK SETBAND
STANDBY
-
ON
ECO POWER
RECORD DISPLAY
MCM510 MICRO SYSTEM
iR
/
RDS
CLOCK SET
MCM510 QUG_Eng 2005.7.12, 16:582