2. Computers & electronics
  3. Audio & home theatre
  4. Home audio sets
  5. Philips
  6. MCD295/12

Philips MCD295/12 User manual

  • Hello! I am an AI chatbot trained to assist you with the Philips MCD295/12 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is included in the Philips MCD295/12 box?
    How do I properly connect the MCD295/12 to my TV?
    How do I set up the TV channel?
    How do I set the clock on the MCD295/12?
    How do I play a disc on the MCD295/12?
    How do I program and tune radio stations on the MCD295/12?
MCD295
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
1
Quick Start Guide
Quick Start Guide
Composite Video Cable
PRO
Remote control with two
AA batteries
MW antenna FM antenna
2
User Manual
User Manual
MCD295 QUG_Eng 2005.12.27, 16:371
AC power cord
Speaker
(right)
Speaker
(left)
AC power cord
FM wire
antenna
MW loop
antenna
3
1
2
3
4
4
Tip
See the User Manual for other TV
connection options.
Setting up the TV
1
2
4
3
Connect the speaker cables.
Connect the MW antenna.
Connect the composite video cable to a TV.
Connect the power cords of the system and TV.
1
2
Press SOURCE (DISC on the remote) to select disc source.
Turn on the TV and set it to the correct Video In channel.
MCD295 QUG_Eng 2005.12.27, 16:372
Setting the clock
1
2
3
4
In standby mode, press and hold CLOCK/RDS on the system.
When the hour digits flash, turn the VOLUME control on the front panel or press
VOLUME +/- on the remote to set the hours.
Press CLOCK/RDS again and the minute digits flash. Then turn the VOLUME control on
the front panel or press VOLUME +/- on the remote to set the minutes.
Press CLOCK/RDS again to confirm the time setting.
Setting system menu options
Tip
See chapters "Preparations" and "System Menu Options" in the User
Manual for detailed descriptions.
MCD295 QUG_Eng 2005.12.27, 16:373
Playing a disc
Programming and tuning to radio stations
1
2
3
Press SOURCE (TUNER on the remote) to select tuner source.
Press PROGRAM for more than two seconds to program all available stations in order of
waveband.
Press PRESETí/ë until the desired preset station is displayed.
Tip
Detailed playback features and additional functions are described in the
accompany owner's manual.
PDCC-JS/JW-0553
2005 C Koninklijie Philips Electronics
N.V. All rights reserved.
http://www.philips.com
1
2
3
Press OPEN•CLOSE3 to open the disc tray and load in a disc, then press the same
button again to close the disc tray.
➜ Make sure the label side of the disc is facing up.
Playback will start automatically. If not press PLAY/PAUSEÉÅ.
To stop playback, press STOP 9.
GB
MCD295 QUG_Eng 2005.12.27, 16:374
/