Swift Group
Dunswell Road
Cottingham
East Yorkshire HU16 4JX
Tel 01482 847332
Fax 01482 841042
email [email protected]
For more information visit
www.swiftgroup.co.uk
Issued July 2012
1400363
Sprite
Technical Handbook
1
Contents
Sprite Specifications .................................................................. 2
Wiring Diagrams ......................................................................... 4
Bulb Chart ................................................................................. 11
Bulb Replacement ...................................................................... 12
3
2
Standard Specifications
Specification
Sprite Alpine 2 Alpine 4 Musketeer TD Major 4 Major 4 FB Major 6 Quattro FB
Berths 2 4 5 4 4 6 6
Axles 1 1 1 1 1 1 2
Internal Length (bed box height) 4.34m/14'3" 4.74m/15'7" 4.74m/15'7" 5.29m/17'4" 5.29m/17'4" 5.60m/18'4" 6.27m/20'7"
Overall Width** 2.23m/7'4" 2.23m/7'4" 2.23m/7'4" 2.23m/7'4" 2.23m/7'4" 2.23m/7'4" 2.23m/7'4"
Overall Height (inc. TV Aerial)** 2.64m/8'8" 2.64m/8'8" 2.64m/8'8" 2.65m/8'8" 2.65m/8'8" 2.65m/8'8" 2.62m/8'7"
Maximum Internal Headroom 1.95m/6'5" 1.95m/6'5" 1.95m/6'5" 1.95m/6'5" 1.95m/6'5" 1.95m/6'5" 1.95m/6'5"
Overall Length** 5.99m/19'8" 6.39m/21'0" 6.39m/21'0" 6.93m/22'9" 6.93m/22'9" 7.25m/23'9" 7.92m/26'0"
Awning A/A dimension 8.73m/28'8" 9.14m/30'0" 9.14m/30'0" 9.68m/31'9" 9.68m/31'9" 9.99m/32'9" 10.66m/35'0"
Mass in Running Order (inc. tolerance) 1013kg/19.9cwt 1047kg/20.6cwt 1079kg/21.2cwt 1147kg/22.6cwt 1147kg/22.6cwt 1234kg/24.3cwt 1361kg/26.8cwt
Maximum Technical Permissible Laden
Mass (Lower limit)
1164kg/22.9cwt 1222kg/24.1cwt 1264kg/24.9cwt 1327kg/26.1cwt 1327kg/26.1cwt 1437kg/28.3cwt 1571kg/30.9cwt
Maximum Technical Permissible Laden
Mass (Upper limit)
1200kg/23.6cwt 1250kg/24.6cwt 1300kg/25.6cwt 1350kg/26.6cwt 1350kg/26.6cwt 1500kg/29.5cwt 1600kg/31.5cwt
Total user Payload 151kg/3.0cwt 175kg/3.4cwt 185kg/3.6cwt 180kg/3.5cwt 180kg/3.5cwt 203kg/4.0cwt 210kg/4.1cwt
Personal Effects 121kg/2.4cwt 145kg/2.9cwt 155kg/3.1cwt 150kg/3.0cwt 150kg/3.0cwt 173kg/3.4cwt 180kg/3.5cwt
Options 30kg/0.6cwt 30kg/0.6cwt 30kg/0.6cwt 30kg/0.6cwt 30kg/0.6cwt 30kg/0.6cwt 30kg/0.6cwt
Tyre Size 175 R14C 99Q 185 R14 102Q 185 R14 102Q 185 R14 102Q 185 R14 102Q 185 R14 102Q 175/65 R14 86T
Tyre pressure at Lower limit MTPLM 52 psi / 3.6 bar 49 psi / 3.4 bar 51 psi / 3.5 bar 55 psi / 3.8 bar 55 psi / 3.8 bar 61 psi / 4.2 bar 33 psi / 2.3 bar
Tyre pressure at Upper limit MTPLM 54 psi / 3.7 bar 51 psi / 3.5 bar 54 psi / 3.7 bar 55 psi / 3.8 bar 55 psi / 3.8 bar 64 psi / 4.4 bar 33 psi / 2.3 bar
Static Load on Coupling Head 100kg 100kg 100kg 100kg 100kg 100kg 100kg
Thermal Insulation Grade THREE THREE THREE THREE THREE THREE THREE
Bed Sizes
Front Double
202cm x 180cm/6'8" x 5'11" 202cm x 128cm/6'8" x 4'2" 202cm x 128cm/6'8" x 4'2" 202cm x 142cm/6'8" x 4'8" 202cm x 142cm/6'8" x 4'8"
202cm x 170cm/6'8" x 5'7" 202cm x 180cm/6'8" x 5'11"
or Front Nearside Single 190cm x 72cm/6'3" x 2'4" 180cm x 72cm/5'11" x 2'4"
and Front Offside Single 180cm x 72cm/5'11" x 2'4" 190cm x 72cm/6'3" x 2'4"
Rear Double 189cm x 132cm/6'2" x 4'4" 192cm x 132/120cm/
6'4" x 4'4"/3'11" 194cm x 132cm/6'4" x 4'4" 192cm x 132cm/6'4" x 4'4" 192cm x 132cm/6'4" x 4'4"
Rear Bunk
Rear Single
Side Single (offside) 180cm x 83cm/5'11" x 2'9" 180cm x 62cm/5'11" x 2'0"
Side Single (nearside) 192cm x 68cm/6'4" x 2'3"
Side Bunk (offside) 176cm x 59cm/5'9" x 1'11" 176cm x 59cm/5'9" x 1'11"
Side Bunk (nearside)
180cm x 59cm/5'11" x 1'11"
Rear Fixed Lower Bunk
Rear Fixed Mid Bunk
Rear Fixed Upper Bunk
Side Fixed Lower Bunk 183cm x 57cm/6'0" x 1'10"
Side Fixed Mid Bunk
Side Fixed Upper Bunk 183cm x 57cm/6'0" x 1'10"
Weights: The method of calculating the Mass in
Running Order (MRO) and user payload figures has
changed in order to bring it in line with European
Vehicle Directives.
Allowances for essential equipment (e.g. gas
cylinders) previously allowed for in the user payload
are now contained within the MRO. A provision for a
leisure battery which used to be within the essential
equipment payload has now been included within the
personal effects payload allowance.
Although the method of calculation has changed, the
overall effect is that the amount of payload available
to the customer has remained the same, it is just
calculated in a different manner
Bed Sizes : Please note that the front double bed
sizes quoted are for seating configurations without
chest of drawers. The front double bed width for a
layout with a chest of drawers fitted will be reduced
by 0.4m(1'4") from that stated.
Awning sizes: Due to varying awning designs and
sizes the awning sizes given are approximate only.
Specific awning sizes must be confirmed by your
dealer or awning manufacturer prior to purchase.
** The dimensions given are approximate due to
slight variations in suspension ride heights, loading
conditions and tyre pressures.
Customers should verify the actual dimensions of
their touring caravan before committing to anything
that could be impacted by theses dimensions
Please note: Any dealer fit options will reduce the
overall payload available to the user of the caravan.
If you require additional payload it is possible to
upgrade the MTPLM to the upper limit. Pleas contact
your Sprite caravan dealer for more information.
5
4
Wiring DiagramsWiring Diagrams
Sprite - Road lighting circuits Sprite - Consumer Circuits - Floor
7
6
Wiring Diagrams Wiring Diagrams
Sprite - Roof circuits Sprite - Power circuits
9
8
Wiring DiagramsWiring Diagrams
Sprite - 230 V circuits Sprite - 13 pin socket
11
10
Wiring Diagrams
Sprite - Cable colour chart
Bulb Chart
Road Lights Bulb type Bulb rating
Front marker lights W5W 12v 5W
Side marker - Low Level W5W 12v 5W
Side marker - High Level R5W 12v 5W
Reversing light P21 12v 21W
Rear indicator light P21 12v 21W
Brake / tail light P21/5W 12v 21W/5W
Fog light P21 12v 21W
Number plate light C5W 12v 5W
Interior / Other Lights Bulb type Bulb rating
Awning Lamp LED FEM0945 complete unit 12v LED
Ceiling light, halogen (living area) Halogen capsule bulb 12v 10W
Ceiling light, halogen (white, shower area) Halogen capsule bulb 12v 10W
Feature light over front seating FEM0937 complete lamp 12v LED
Kitchen light Fluorescent 300mm 12v 8W
Downlight, reading lights GU4 / MR11 Dichroic 12v GU4 10W
Eyelite bunk light T10 (t3 1/4) Wedge 12v 5W
Note: Not all lights and bulbs feature on all models within a range
13
12
Bulb replacement
SPRITE ROAD LIGHT
BULB ACCESS
STOP / TAIL / INDICATOR AND
REVERSE LAMPS
Bulb access is from front / via lense of each
lamp.
Remove 2x screws from each light lense and
withdraw lense.
Bulbs are a bayonet fitting – apply slight
pressure on bulb towards light fitting, and twist
to release.
Reverse procedure to re-fit bulb and lense.
Take care when replacing stop/tail lamp bulb,
that orientation of bulb is correct – to check,
brake light operation should be brighter than tail
lamp operation.
REAR CENTRAL FOG LIGHT
Bulb access is from front / via lense of lamp.
Remove 2x screws from light lense and
withdraw lense.
Bulb is a bayonet fitting – apply slight pressure
on bulb towards light fitting, and twist to release.
Reverse procedure to re-fit bulb and lense.
UPPER REAR SIDE POSITION LAMPS (RED /
CLEAR LENSE)
Lense is removed from base to access bulb.
Carefully insert small flat bladed screwdriver
into recess in lower edge of lamp base. Apply
pressure to release locking barb.
Lift lense upwards and away from lamp base,
lower edge first.
Lever bulb out of retaining clips.
Reverse procedure to re-fit bulb and lense.
NUMBER PLATE LAMPS
Bulb access is from the front / via lense of each
lamp.
Remove the two screws in the lense of the lamp.
Lever the bulb out of retaining clips.
Reverse the procedure to re-fit a new bulb and
the light lense.
FRONT MARKER POSITION LAMPS
Bulb access is from rear of lamp.
Remove 2x screws from light fitting, and
withdraw whole fitting from caravan front panel.
Harness plugs into bulb holder – Twist bulb
holder relative to lamp body to release bulb
holder from lamp body.
Bulbs are push fit into bulb holder – pull bulb
directly away from holder to release.
Reverse procedure to replace bulb in holder,
holder in lamp and lamp onto caravan body.
SIDE MARKER POSITION LAMPS
Bulb access is from rear of lamp. First check
from within caravan if the rear of the lamp is
accessible:
If rear of light is accessible:
Harness plugs into bulb holder – Twist bulb
holder relative to lamp body to release bulb
holder from lamp body.
Bulbs are push fit into bulb holder – pull bulb
directly away from holder to release.
Reverse procedure to replace bulb in holder
and holder in lamp.
If rear of light is not accessible:
Remove 2x screws from light fitting, and
withdraw whole fitting from caravan body.
Harness plugs into bulb holder – Twist bulb
holder relative to lamp body to release bulb
holder from lamp body.
Bulbs are push fit into bulb holder – pull bulb
directly away from holder to release.
Reverse procedure to replace bulb in holder,
holder in lamp and lamp onto caravan body.
/
