Generation Lighting 9647 Operating instructions
- Type
- Operating instructions
Caution : Turn o electrical current at source before working with
any lighting xture or portable lamp. Install and use this product
according to your local electrical codes and regulations.
1. Place transformer black and white (120V) wires through hole in
electrical box. Mount transformer by placing the transformer’s
threaded section through knock out on electrical box. Secure with
locknut.
2. Connect the black wires from the transformer to the black wire
in the electrical box. Connect the red wires from the transformer to
the white wire in the electrical box using listed wire connectors.
3. If mounting transformer on a non-metallic electrical box,con-
nect green ground wire from transformer to ground wire in box.
4. Attach wires from the address light (not included) to the two (2)
terminal screws on transformer.
INSTALLATION AND SAFETY INSTRUCTIONS
Warning: Use of other manufacturers components will void warranty
ETL or U.L. listing and create a potential safety hazard.
874-CHYTEFAS RUOY ROF
10/28/16
J-BOX
9647
LOW
VOLTAGE
120V SUPPLY WIRES
Caution : Turn o electrical current at source before working with
any lighting xture or portable lamp. Install and use this product
according to your local electrical codes and regulations.
1. Place transformer black and white (120V) wires through hole in
electrical box. Mount transformer by placing the transformer ’s
threaded section through knock out on electrical box. Secure with
locknut.
2. Connect the black wires from the transformer to the black wire
in the electrical box. Connect the red wires from the transformer to
the white wire in the electrical box using listed wire connectors.
3. If mounting transformer on a non-metallic electrical box,con-
nect green ground wire from transformer to ground wire in box.
4. Attach wires from the address light (not included) to the two (2)
terminal screws on transformer.
INSTALLATION AND SAFETY INSTRUCTIONS
Warning: Use of other manufacturers components will void warranty
ETL or U.L. listing and create a potential safety hazard.
874-CHYTEFAS RUOY ROF
10/28/16
J-BOX
9647
LOW
VOLTAGE
120V SUPPLY WIRES
Caution : Turn o electrical current at source before working with
any lighting xture or portable lamp. Install and use this product
according to your local electrical codes and regulations.
1. Place transformer black and white (120V) wires through hole in
electrical box. Mount transformer by placing the transformer ’s
threaded section through knock out on electrical box. Secure with
locknut.
2. Connect the black wires from the transformer to the black wire
in the electrical box. Connect the red wires from the transformer to
the white wire in the electrical box using listed wire connectors.
3. If mounting transformer on a non-metallic electrical box,con-
nect green ground wire from transformer to ground wire in box.
4. Attach wires from the address light (not included) to the two (2)
terminal screws on transformer.
INSTALLATION AND SAFETY INSTRUCTIONS
Warning: Use of other manufacturers components will void warranty
ETL or U.L. listing and create a potential safety hazard.
874-CHYTEFAS RUOY ROF
10/28/16
J-BOX
9647
LOW
VOLTAGE
120V SUPPLY WIRES
Caution : Turn o electrical current at source before working with
any lighting xture or portable lamp. Install and use this product
according to your local electrical codes and regulations.
1. Place transformer black and white (120V) wires through hole in
electrical box. Mount transformer by placing the transformer ’s
threaded section through knock out on electrical box. Secure with
locknut.
2. Connect the black wires from the transformer to the black wire
in the electrical box. Connect the red wires from the transformer to
the white wire in the electrical box using listed wire connectors.
3. If mounting transformer on a non-metallic electrical box,con-
nect green ground wire from transformer to ground wire in box.
4. Attach wires from the address light (not included) to the two (2)
terminal screws on transformer.
INSTALLATION AND SAFETY INSTRUCTIONS
Warning: Use of other manufacturers components will void warranty
ETL or U.L. listing and create a potential safety hazard.
874-CHYTEFAS RUOY ROF
10/28/16
J-BOX
9647
LOW
VOLTAGE
120V SUPPLY WIRES
-
1
Generation Lighting 9647 Operating instructions
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Phantom Tech Projector User manual
-
ADB L-852KL User manual
-
Lightolier 1004ICVN User manual
-
Nordyne CMF 80 PO User guide
-
ADB L-804 User manual
-
Cleveland KGL-60 User manual
-
SunStar ECLIPSE SIR45–N5 Installation And Operation Instructions Manual
-
Perfect Fit T76-200 User guide
-
Rheem G100MF/418995 Installation guide
-
ESAB LPH 35 User manual
