Simplicity ZT3000 User manual

Category
Lawnmowers
Type
User manual

Simplicity ZT3000, with its 24 HP Briggs & Stratton Engine, is a high-performance machine. You can choose between 44" or 50" mower deck to get the perfect cut for your lawn. The zero-turn feature will give you unmatched maneuverability to get around obstacles and tight corners with ease. The instrument control panel gives you quick and easy access to all the important functions of the mower, and the comfortable seat and floor plate provide a smooth and enjoyable ride. With its rugged construction and powerful engine, Simplicity ZT3000 is built to last and make your lawn care a breeze.

Simplicity ZT3000, with its 24 HP Briggs & Stratton Engine, is a high-performance machine. You can choose between 44" or 50" mower deck to get the perfect cut for your lawn. The zero-turn feature will give you unmatched maneuverability to get around obstacles and tight corners with ease. The instrument control panel gives you quick and easy access to all the important functions of the mower, and the comfortable seat and floor plate provide a smooth and enjoyable ride. With its rugged construction and powerful engine, Simplicity ZT3000 is built to last and make your lawn care a breeze.

Parts Manual
Rev. 6/2008
ZT3000
Series Zero-Turn Rider & Mower Deck
TP 400-7330-H-CH-S
Mf
g
. No. Descri
p
tion
24HP Product
5900660 ZT3000B2444, 24HP B&S Rider w/44" Mower
5900662 ZT3000B2450, 24HP B&S Rider w/50" Mower
5900684 ZT3000B2450CE, 24HP B&S Rider w/50" Mower (CE/Export)
5101089
Part No.:
Table Of Content
s
Torque Specification Chart ..................................................................... Inside Back Cover
PRODUCT COMPONENTS PAGES
Main Frame & Front Suspension Group .............................................................................................................. 4
Rear Bumper Group ............................................................................................................................................. 6
Engine & PTO Group - 24 HP Briggs & Stratton ................................................................................................. 8
Instrument Control Panel Group .......................................................................................................................... 10
Pump Drive Group ................................................................................................................................................ 12
Motion Control Group ........................................................................................................................................... 14
Transmission SERVICE PARTS .......................................................................................................................... 16
Hydraulic Group ................................................................................................................................................... 18
Electrical Group .................................................................................................................................................... 20
Seat & Floor Plate Group ..................................................................................................................................... 22
Fuel Tank & Replacement Parts Group ............................................................................................................... 24
Parking Brake Group ............................................................................................................................................ 26
Deck Lift Group .................................................................................................................................................... 28
Wheel & Tire Group .............................................................................................................................................. 32
Decals Group - Brand & Model ............................................................................................................................ 34
Decals Group - Safety & Common ....................................................................................................................... 36
Export Decals Group - Safety & Common ........................................................................................................... 38
44" & 50" Mower Deck - Belt & Idler Group ......................................................................................................... 40
44" & 50" Mower Deck - Housing, Arbors, & Blades Group ................................................................................ 42
44" Mower Deck - Rollers Group ......................................................................................................................... 44
50" Mower Deck - Rollers Group ......................................................................................................................... 48
Main Frame & Front Suspension Group
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
5300938
The above parts group applies to the following Mfg. Nos.:
4
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
5900660 - ZT3000B24
5900662 - ZT3000B24
5900684 - ZT3000B24
TP 400-7330-H-CH-S
PART NO. DESCRIPTIONREF NO. QTY.
Main Frame & Front Suspension Group
Footnotes
NUT, 5/16-18 HEX NYLOCK FLANGE 1 5025392SM 2 BOLT, 5/16-18 X 3-3/4 GD5 2 5025011X30SM 2 WASHER, 5/16 SAE 3 5025155SM 4 NUT, 5/16-18 HEX NYLON LOCK 4 5025057SM 6 BOLT, 5/16-18 X 1-3/4 GD5 YZ 5 5025011X14SM 2 SHOCK 6 5023213SM 2 WELD, MAINFRAME, SIMPLICITY ZT, ORG 7 5402816CSM 1 SCREW, 5/16-18 X 1 FLAT HD SC 8 5025303SM 4 PAD, FRICTION, .375 X 1.25 X 4.00 9 5100930SM 2 NUT, 3/4-16 HEX NYLON LOCK 10 5025284SM 1 WASHER, 3/4 SAE 11 5025160SM 1 BOLT, 3/4-16 X 7" YZ GD5 12 5025265X56SM 1 SPACER, .75 X 1.00 X 2.38 13 5047489SM 1 PIVOT BEARING, 1.00" X 1.125" OD X 1.50" 14 5022852SM 1 PIVOT BEARING, 1.00 X 1.125 OD X .50 15 5100358SM 1 SPACER, .76X 1.50 X .79 16 5400756SM 1 CAP, VINYL 1.687 X 1-1/2 17 5023214SM 2 COLLAR, 1" SPLIT 18 5020602SM 2 GREASE FITTING, 1/4-28 STRAIGHT 19 5020095SM 2 WELD,CASTER YOKE 20 5048775CSM 2 WELD, PIVOTING FRONT END - ORG 21 5400962CSM 1 BUSHING, FLANGE 22 5021541SM 4
The above parts group applies to the following Mfg. Nos.:
5
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
5900660 - ZT3000B24
5900662 - ZT3000B24
5900684 - ZT3000B24
TP 400-7330-H-CH-S
Rear Bumper Group
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
5300939
The above parts group applies to the following Mfg. Nos.:
6
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
5900660 - ZT3000B24
5900662 - ZT3000B24
5900684 - ZT3000B24
TP 400-7330-H-CH-S
PART NO. DESCRIPTIONREF NO. QTY.
Rear Bumper Group
Footnotes
WELD, BUMPER - CONS Z - ORG 1 5402844CSM 1 PLUG, PANEL, 1.25 - BLACK 2 5023484SM 6 BOLT, 3/8-16 X 1 GD5 YZ 3 5025013X8SM 6 WASHER, 3/8 SAE 4 5025156SM 6 NUT, 3/8-16 HEX NYLOCK FLANGE 5 5025394SM 6
The above parts group applies to the following Mfg. Nos.:
7
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
5900660 - ZT3000B24
5900662 - ZT3000B24
5900684 - ZT3000B24
TP 400-7330-H-CH-S
Engine & PTO Group - 24 HP Briggs & Stratton
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
5300943
The above parts group applies to the following Mfg. Nos.:
8
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
5900660 - ZT3000B24
5900662 - ZT3000B24
5900684 - ZT3000B24
TP 400-7330-H-CH-S
PART NO. DESCRIPTIONREF NO. QTY.
Engine & PTO Group - 24 HP Briggs & Stratton
Footnotes
* ENGINE, 24HP B&S, ELS Mod. #44M777-0121-E1 1-- 1 CLUTCH,#51110100,ELECTRIC, 1" SHAFT 2 5023100SM 1 CLUTCH ANCHOR PAD 3 5043636SM 1 WASHER, .34 X 1.25 X 10 GA 4 5044617SM 5 CAPSCREW, CRANKSHAFT, 7/16-20 x 3-1/4"YZ 5 5023253SM 1 SPACER, .45 X 1.62 X .37 6 5042132SM 1 BOLT, 5/16-18 X 1 GD5 YZ 7 5025011X8SM 5 WASHER, 5/16 SAE 8 5025155SM 6 NUT, 5/16-18 HEX NYLOCK FLANGE 9 5025392SM 7 KEY, 1/4" SQ. X 2 1/4 10 5050407X18SM 1 BOLT, 5/16-18 X 2-1/4" GD5 YZ 11 5025011X18SM 4 WASHER, 5/16" INT. TOOTH LOCK 12 5025188SM 4 PLATE, HEAT SHIELD - ORG 13 5403059CSM 1 HOSE, OIL DRAIN 14 5048681SM 1 GASKET, EXHAUST 15 690970 2 SCREW, SEM HEX HEAD 16 690341 4 MUFFLER, B&S-ELS 22-26HP 17 5100907SM 1 EXTENSION, TAILPIPE, 3" 18 5100969SM 1 SCREW 19 5021808X8SM 2 BODY CLIP, 5/16-18 X 1/2 DEEP 20 5022308SM 2 PRE CLEANER (SV) 21 792303 1 AIR CLEANER W/ PRE CLEANER (SV) (INCLUDES REF NO 21) 22 792105 1 SCREW, CROSS RECESSED THREAD (EXPORT MODELS ONLY) 23 95050 1 COVER, STATIC / LABEL ASSEMBLY (EXPORT MODELS ONLY) 24 793821 1 CLAMP, VINYL INSULATED (NOT SHOWN - FOR OIL DRAIN HOSE) 25 5021500SM 1 BOLT, 1/4-20 X 3/4 GD5 YZ (NOT SHOWN - FOR OIL DRAIN HOSE) 26 5025010X6SM 1 NUT, 1/4-20 HEX NYLOCK FLANGE (NOT SHOWN - FOR OIL DRAIN HOSE) 27 5025391SM 1 WASHER, 1/4 SAE (NOT SHOWN - FOR OIL DRAIN HOSE) 28 50251541SM 1 NUT, 5/16-18 HEX SERRATED FLANGE (LARGE) 29 5025139 2 BOLT, 5/16-18 X 1-1/4 GD5 YZ 30 5025011X10 2 OIL FILTER (SV) (NOT SHOWN) 31 696854 1
The above parts group applies to the following Mfg. Nos.:
9
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
5900660 - ZT3000B24
5900662 - ZT3000B24
5900684 - ZT3000B24
TP 400-7330-H-CH-S
Instrument Control Panel Group
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
5300942
The above parts group applies to the following Mfg. Nos.:
10
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
5900660 - ZT3000B24
5900662 - ZT3000B24
5900684 - ZT3000B24
TP 400-7330-H-CH-S
PART NO. DESCRIPTIONREF NO. QTY.
Instrument Control Panel Group
Footnotes
CABLE, THROTTLE CONTROL, 36" 1 5100182SM 1 NUT, 1/4-20 HEX NYLON LOCK 2 5025095SM 2 BOLT, 1/4-20 X 3/4 GD5 YZ 3 5025010X6SM 2 PLUG, .820X1.44 HOLE, BLACK PLASTIC 4 1709188SM 1 O-RING, 7/8 ID X 1/16 W 5 5022269SM 1 RING, SWITCH RETAINER 6 5022222SM 1 NUT, 3/8-24 HEX 7 5025035SM 1 SCREW, #10-24 X 1" RS 8 5025270SM 1 NUT, #10-24 HEX NYLON LOCK 9 5025271SM 1 PLATE, CONTROL PANEL - BLACK 10 5402842ASM 1 SWITCH, IGNITION, 6 POST 11 5020927SM 1 HOUR METER, W/ SUPRESSOR 12 5100996SM 1 SWITCH, BLADE ENGAGEMENT 13 5022180SM 1 KNOB-SLOTTED THROTTLE 14 1725337SM 1 CABLE, CHOKE CONTROL, 51" 15 5047779SM 1 KEY, IGNITION, MOLDED SET (SV) (SET OF TWO 16 5022789SM 1 COVER (SV) 17 5022790SM 1 PLASTIC NUT (SV) 18 5022791SM 1
The above parts group applies to the following Mfg. Nos.:
11
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
5900660 - ZT3000B24
5900662 - ZT3000B24
5900684 - ZT3000B24
TP 400-7330-H-CH-S
Pump Drive Group
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
5300944
The above parts group applies to the following Mfg. Nos.:
12
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
5900660 - ZT3000B24
5900662 - ZT3000B24
5900684 - ZT3000B24
TP 400-7330-H-CH-S
PART NO. DESCRIPTIONREF NO. QTY.
Pump Drive Group
Footnotes
PULLEY, CRANKSHAFT 1 5101296SM 1 IDLER PULLEY 2 5021079SM 1 SPACER, HYDRO PULLEY 3 5049184SM 1 BOLT, 3/8-16 X 3 GD5 YZ 4 5025013X24SM 1 BOLT, 3/8-16 X 2 GD5 YZ 5 5025013X16SM 1 WASHER, 3/8 SAE 6 5025156SM 2 NUT, 3/8-16 HEX NYLOCK FLANGE 7 5025394SM 3 WASHER, 3/8 FENDER 8 5025165SM 2 BELT, 79.46 EL, HYDRO DRIVE 9 5101033SM 1 WELD, IDLER, PUMP DRIVE - ORG 10 5402847CSM 1 SPRING, EXTENSION, SWIVEL END 11 5022847SM 1 PULLEY, IDLER, SINGLE FLANGE, 4" OD 12 5101080SM 1 SPACER, .39 X 1.00 X .25 13 5044960SM 1 SPACER, .39 X .75 X 1.06 14 5042658SM 1 BUSHING, BRASS, 3/4 X 1 X 1 15 5020876BSM 1 SPACER, SHOULDER 16 5045943SM 1 EYE BOLT, 3/8-16 X 5", 1" EYE 17 5021812SM 1 NUT, 3/8-16 HEX 18 5025034SM 2 WASHER, 3/8 GD.9 FLAT 19 5025293SM 1 BOLT, 3/8-16 X 3-1/2 GD5 YZ 20 5025013X28SM 1 PULLEY, IDLER, FLAT, 2.75 DIA X .376 ID 21 5101105SM 1
The above parts group applies to the following Mfg. Nos.:
13
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
5900660 - ZT3000B24
5900662 - ZT3000B24
5900684 - ZT3000B24
TP 400-7330-H-CH-S
Motion Control Group
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
5300945
The above parts group applies to the following Mfg. Nos.:
14
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
5900660 - ZT3000B24
5900662 - ZT3000B24
5900684 - ZT3000B24
TP 400-7330-H-CH-S
PART NO. DESCRIPTIONREF NO. QTY.
Motion Control Group
Footnotes
GRIP, FOAM, 3/4 ID, 16 LONG 1 5022068SM 2 BOLT, 5/16-18 X 1 GD5 YZ 2 5025011X8SM 4 WASHER, 5/16 SAE 3 5025155SM 18 WASHER, 5/16 LOCK YZ 4 5025170SM 4 SPACER, .39 X .63 X 1.50 5 5048264SM 8 BOLT, 5/16-18 X 2-1/2" GD5 YZ 6 5025011X20SM 8 NUT, 5/16-18 HEX NYLOCK FLANGE 7 5025392SM 16 SCREW, #10-24 X 1/2 ROUND PHILLIPS 8 5025179X4SM 4 NUT, #10-24 HEX 9 5025029SM 4 BOLT, 5/16-18 X 2 GD5 TFL 10 5025055X16SM 4 BEARING, FLANGE 11 5021499SM 2 BEARING, BRONZE FLANGE, 3/4 12 5021098SM 2 MOUNT, CONTROL ARM 13 5047004SM 2 BOLT, 3/8-16 X 1-1/4 SHCS 14 5025327SM 4 NUT, 3/8-16 HEX NYLON LOCK 15 5025096SM 4 BOLT, 3/8-16 X 1 GD5 YZ 16 5025013X8SM 2 BOLT, 3/8-16 X 1-3/4 GD5 17 5025013X14SM 4 NUT, 3/8-16 HEX NYLOCK FLANGE 18 5025394SM 6 NUT, 5/16-18 HEX SERRATED FLANGE (LARGE) 19 5025139SM 4 BOLT, 5/16-18 X 1-1/4 GD5 YZ 20 5025011X10SM 4 WELD, PLATE, NEUTRAL - ORG 21 5402852CSM 2 DAMPENER, CONTROL,#(P6709/P3610) 22 5100940SM 2 WELD, CONTROL SHAFT, LH - ORG 23 5402851CSM 1 WELD, CONTROL SHAFT, RH -ORG 24 5402850CSM 1 BALL STUD, 5/16 X .50,# PC-477-2) 25 5100941SM 4 PLATE, CONTROL LINK, TRANSAXLE - ORG 26 5402872CSM 2 ROD, HYDRO LINKAGE - CONZ - YZ 27 5101057SM 2 BOLT, 7/16-14 X 3/4, GD 5 YZ 28 5025015X6SM 2 NUT, 7/16-14 HEX TOP LOCK 29 5025044SM 2 BOLT, 1/4-20 X 3/4 GD5 YZ 30 5025010X6SM 2 NUT, 1/4-20 HEX NYLOCK FLANGE 31 5025391SM 2 NUT, 5/16-24 HEX, LH 32 5023212SM 2 NUT, 5/16-24 JAM 33 5023216SM 2 BALL JOINT, 5/16-24, LH FEMALE 34 5022628SM 2 BALL JOINT, 5/16-24, FEMALE 35 5021146SM 2 NUT, 5/16-18 HEX SERRATED FLANGE (SMALL) 36 5025127SM 8 BOLT, 5/16-18 X 1-1/2" GD5 TFL 37 5025055X12SM 2 WELD, HANDLE MOTION CONTROL-LH 38 5047055CSM 1 WELD, HANDLE MOTION CONTROL-RH 39 5047056CSM 1
The above parts group applies to the following Mfg. Nos.:
15
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
5900660 - ZT3000B24
5900662 - ZT3000B24
5900684 - ZT3000B24
TP 400-7330-H-CH-S
Transmission SERVICE PARTS
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
5101026
The above parts group applies to the following Mfg. Nos.:
16
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
5900660 - ZT3000B24
5900662 - ZT3000B24
5900684 - ZT3000B24
TP 400-7330-H-CH-S
PART NO. DESCRIPTIONREF NO. QTY.
Transmission SERVICE PARTS
Footnotes
OIL FILTER 23 5101026X1SM 1 SEAL, LIP, 18 X 32 X 7 41 5101026X2SM 1 SEAL, LIP, 17 X 40 X 7 56 5101026X3SM 1 RING, RET 2.06 INT 57 5101026X4SM 1 BEARING, BALL, 1.0 X 52 X 15 OPEN 6205M 95 5101026X5SM 1 FAN, 7", 10 BLADE 120 5101026X6SM 1 PULLEY, 4.5 INCH 121 5101026X7SM 1 KIT SEAL 200 5101026X8SM 1 KIT, INPUT SHAFT 210 5101026X9SM 1
The above parts group applies to the following Mfg. Nos.:
17
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
5900660 - ZT3000B24
5900662 - ZT3000B24
5900684 - ZT3000B24
TP 400-7330-H-CH-S
Hydraulic Group
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
5300946
The above parts group applies to the following Mfg. Nos.:
18
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
5900660 - ZT3000B24
5900662 - ZT3000B24
5900684 - ZT3000B24
TP 400-7330-H-CH-S
PART NO. DESCRIPTIONREF NO. QTY.
Hydraulic Group
Footnotes
TRANSMISSION, RH HYDRO-GEAR 1 5101026SM 1 TRANSMISSION, LH, HYDRO-GEAR 2 5101027SM 1 CLAMP, HOSE, 1/2 3 5025474SM 4 ROD, DUMP VALVE, LH - CONZ 4 5101060SM 1 ROD, DUMP VALVE, RH - CONZ 5 5101061SM 1 BOLT, 1/4-20 X 3/4 GD5 YZ 6 5025010X6SM 4 WASHER, 1/4 SAE 7 5025154SM 4 NUT, 1/4-20 HEX NYLOCK FLANGE 8 5025391SM 4 BOLT, 5/16-18 X 3" GD5 YZ 9 5025011X24SM 4 BOLT, 5/16-18 X 2-1/4" GD5 YZ 10 5025011X18SM 4 NUT, 5/16-18 HEX NYLOCK FLANGE 11 5025392SM 8 WASHER, 5/16 SAE 12 5025155SM 8 COLLAR, 5/16" SET 13 5020047SM 2 RESERVOIR, HYDRO OIL, 350 ML 14 5100473SM 2 HOSE, 1/2" PUSH-ON, 9.00" 15 5050857X9SM 2
The above parts group applies to the following Mfg. Nos.:
19
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
5900660 - ZT3000B24
5900662 - ZT3000B24
5900684 - ZT3000B24
TP 400-7330-H-CH-S
Electrical Group
NOTE: Unless noted otherwise, use
the standard hardware torque
specification chart.
5300947
The above parts group applies to the following Mfg. Nos.:
20
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
5900660 - ZT3000B24
5900662 - ZT3000B24
5900684 - ZT3000B24
TP 400-7330-H-CH-S
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54

Simplicity ZT3000 User manual

Category
Lawnmowers
Type
User manual

Simplicity ZT3000, with its 24 HP Briggs & Stratton Engine, is a high-performance machine. You can choose between 44" or 50" mower deck to get the perfect cut for your lawn. The zero-turn feature will give you unmatched maneuverability to get around obstacles and tight corners with ease. The instrument control panel gives you quick and easy access to all the important functions of the mower, and the comfortable seat and floor plate provide a smooth and enjoyable ride. With its rugged construction and powerful engine, Simplicity ZT3000 is built to last and make your lawn care a breeze.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI