2. Concept2
  3. Model D
Model D

Concept2 Model D Assembly Instructions

  • Hello, I've reviewed the assembly instructions for the Concept2 Indoor rower Model D. This document provides detailed steps and visual aids for assembling the rower. It also includes the rower's specifications, such as its dimensions, weight, and space requirements for use. I'm ready to answer any questions you have regarding the assembly or features of this rower.
  • What is the weight capacity of the Model D?
    What are the dimensions of the Model D?
    What is the space required for use of the Model D?
USER
MANUAL
Long Leg
23.5”(60 cm)
(4) 3/4” (2.54 cm)
PN 2233
1
2
1.
2.
3.
4.
3
PN 1708
PN 2952
PN 2856 - Gray
PN 1735 - Black
PN 2137 - Gray
PN 1118 - Black
PN 2136 - Gray
PN 1117 - Black
Serial number
Assembly Tip
To prevent thread damage, be sure holes line
up before inserting fasteners. Do not fully
tighten until all fasteners are in place.
1116
IMPORTANT NOTE:
Use these instructions for
MODEL D assembly.
MODEL D
Assembly Instructions
PN 2858 - Gray
PN 2848 - Black
(4) 3/4” (2.54 cm)
PN 2233
MODEL D
Weight: 57 lb (26 kg)
Dimensions: 8 ft x 2 ft (244 cm x 61 cm)
Space Required for Use: 9 ft x 4 ft (274 cm x 122 cm)
Weight Capacity: 500 lb (227 kg) as tested by Concept2*
*300 lb (135 kg) as tested per European Stationary Fitness
Equipment Testing Standard EN 20957-7
Contents of PN 2952
USER
MANUAL
PN 2230
PN 2233
3/4” (2.54 cm)
Footstrap
PN 2854 - Gray
PN 2844 - Black
PN 1818
Assembly Tip
Note that the long leg
extends from the same side
as the caster wheels.
Long Leg
Caster Wheels
/