© Danfoss | DCS (mrb) | 2019.06
AU308671674173
1
AK-SM 800 CAT 5 Cable Direct
Connect Via Ethernet Port
Programming Guide
Try using PC temporary unlock feature to modify LAN connection on your laptop. or administrative
rights are needed to create or modigy existing LAN. Turn off wireless connection using button.
A. Laptop Setup
• Go to following locations on your Laptop
- Control Panel > Network and Sharing > Right Click on LAN Connection and choose
Properties (Not shown).
- Next select TCP\IP and click on properties button.
- In this example Laptop is not connected to a network and a fixed IP is entered.
If connected to a network choose to obtain IP automatically.
danfoss.us
© Danfoss | DCS (mrb) | 2019.06
AU308671674173
2
B. AK-SM8xx Ethernet Setup
• Go to the flowwing screens on your AK-SM8xx
- Configuration > Comm > and enter the network settings then reset controller.
C. Using a patch CAT5 Cable connected to PC and SM Controller Ethernet Port. Then run the
latest SVD/(Store View Desktop) then enter IP address of SM Controller used in step B.
Once connected enter valid username and password to logon.
Remember to change back to original settings for both PC and SM Controller when complete.
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alternations can be made without subsequential changes being necessary in specications already agreed.
All trademarks in this material are property of the respecitve companies. Danfoss and Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
-
1
-
2
Danfoss 080Z4006 User guide
- Type
- User guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Danfoss 080Z4006 User guide
-
Danfoss 084B8032 User guide
-
-
-
-
-
-
-
-