PYLE Audio PLDVCR500 User manual

Brand: PYLE Audio

Model: PLDVCR500

Category: DVD players

Type: User manual

This manual is also suitable for

PLDVCR600

User's Manual

◆

In the initial settings, exclusive channel for DVD/Video is set to CH 3.

Set the TV channel to CH3 before using it.

◆

Region code of DVD/Video player for home is 1 or ALL.

In inserting a disc with other region code, it does not operate.

Please only use a disc with region code 1 or ALL.

◆

is a 'Prohibition' mark. If this mark is displayed in operating the product,

please wait for a while, then use it. If 'Prohibition' mark continues to be displayed

in pressing a button after that, it means the button does not

function in the currently played disc.

view

MODEL NO.:PLDVCR600

PLDVCR500

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle,

is intended to alert the user to the presence of uninsulated

dangerous voltage within the product s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral

triangle is intended to alert the user to the presence

of important operating and servicing instructions in

the literature accompanying the appliance.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,

FULLY INSERT.

WARNING :

CAUTION :

IMPORTANT FOR LASER PRODUCTS

LASER :

This Digital Video Disc Player employs a Laser System. To ensure proper use of this product

please read this owner s manual carefully and retain for future reference. Should the unit require

maintenance, contact an authorized service location - see service procedure.

Use of control adjustments or the performance of procedures other than those specified may

result in hazardous radiation exposure.

To prevent direct exposure to the laser beam, do not try to open the enclosure. Visible laser

radiation when open and interlocks defeated.

DO NOT STARE INTO THE BEAM.

DANGER :

Visible laser radiation when open and interlock failed or defeated.

Avoid direct exposure to beam.

CAUTION :

Do not open the top cover. There are no user serviceable parts

inside the Unit; leave all servicing to qualified service personnel.

FCC NOTICE:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rule. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception; which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment to an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experience radio/TV technical for help.

CAUTION:

Any changes or modification in construction of this device which are not expressly

approved by the party responsible for compliance could void the user s authority to operate

the equipment.

Important Safeguards

This set has been designed and manufactured to assure personal safety. Improper use can result in electric

shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following

procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts

that can be repaired by the user.

1 READ INSTRUCTIONS

All the safety and operating instructions should be read before the unit is operated.

2 RETAIN INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3 HEED WARNINGS

All warnings on the unit and in the operating instructions should be adhered to.

4 FOLLOW INSTRUCTIONS

All operating and use instructions should be followed.

5 CLEANING

Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use

a damp cloth for cleaning.

6 ATTACHMENTS

Do not use attachments unless recommended by the unit s manufacturer as they may cause hazards.

7 WATER AND MOISTURE

Do not use this unit near water- for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet

basement, or near a swimming pool and the like. Caution : Maintain electrical safety. Powerline operated

equipment or accessories connected to this unit should bear the UL listing mark or CSA certification mark on the

accessory itself and should not be modified so as to defeat the safety features. This will help avoid any potential

hazard from electrical shock or fire. If in doubt, contact qualified service personnel.

8 ACCESSORIES

Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The

unit may fall, causing serious injury to a child or adult as well as serious

damage to the unit. Use this unit only with a cart, stand , tripod, bracket, or

table recommended by the manufacturer.

A unit and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the unit and cart combination

to overturn.

9 VENTILATION

Slots and openings in the case are provided for ventilation to ensure reliable operation of the unit and to

protect it from overheating. These openings must not be blocked or covered. These openings must not be

blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed

near or over a radiator or heat radiator. This unit should not be placed in a built-in installation such as a

bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have been

adhered to.

10 POWER SOURCES

This unit should be operated only from the type of power source indicated on the marking label. If you are

not sure of the type of power supply to your home, consult your dealer or local power company. For units

intended to operate from battery power, or other sources, refer to the operating instructions.

PORTABLE CART WARNING

(symbol provided by RETAC)

11 GROUNDING OR POLARIZATION

This unit is equipped with a polarized alternating -current line plug (a plug having one blade wider than the other).

This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug

fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your obsolete

outlet.To prevent electric shock, do not use this polarized plug with an extension cord, receptacle, or other outlet

unless the blades can be fully inserted without blade exposure. If you need an extension cord, use a polarized

cord.

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

ANTENNA LEAD

IN WIRE

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250 PART H)

GROUND CLAMP

ELECTRIC

SERVICE

EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

EXAMPLE OF ANTENNA

GROUNDING

NEC - NATIONAL ELECTRICAL CODE

12 POWER-CORD PROTECTION

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon

or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they

exit from the unit.

Note to CATV system installer

This reminder is provided to call the CATV system installer s attention to Section 820-40 of the NEC which

provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to

the grounding system of the building, as close to the point of cable entry as practical.

13 Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the product, be

sure the antenna or cable system is grounded so as to provide some

protection against voltage surges and built-up static charges. Section

810 of the National Electrical Code, ANSI/NFPA No. 70-1984

(Section 54 of Canadian Electrical Code, Part 1) provides information

with respect to proper grounding of the mast and supporting

structure, grounding of the lead-in wire to an antenna-discharge unit,

connection to grounding electrodes, and requirements for the

grounding electrode. See example as shown.

14 Power Lines

An outside antenna system should not be located in the vicinity of overhead power lines, other electric light or

power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching or approaching such power lines or circuits as contact with

them might be fatal. Installing an outdoor antenna can be hazardous and should be left to a professional antenna

installer.

15 LIGHTNING

For added protection for this unit during a lightning storm, or when it is left unattended and unused for long periods

of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to

the unit due to lightning and power line surges.

16 DISC TRAY

Keep your fingers well clear of the disc as it is closing. It may cause serious personal injury.

17 OVERLOADING

Do not overload wall outlets of extension cords as this can result in a risk of fire or electric shock.

18 OBJECT AND LIQUID ENTRY

Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or

short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the unit.

19 BURDEN

Do not place a heavy object on or step on the product. The object may fall, causing serious personal injury and

serious damage to the product.

20 DISC

Do not use a cracked, deformed or repaired disc. These discs are easily broken and may cause serious personal

injury and product malfunction.

21 SERVICING

Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous

voltage or other hazards. Refer all servicing to qualified service personnel.

22 DAMAGE REQUIRING SERVICE

Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following

conditions.

A. When the power-supply cord or plug is damaged.

B. If liquid has been spilled, or objects have fallen into the unit.

C. If the unit has been exposed to rain or water.

D. If the unit does not operate normally by following the operating instructions. Adjust only those

controls that are covered by the operating instructions. Improper adjustment of other controls may

result in damage and will often require extensive work by a qualified technician to restore the unit to

its normal operation.

E. If the unit has been dropped or the cabinet has been damaged.

F. When the unit exhibits a distinct change in performance-this indicates a need for service.

23 REPLACEMENT PARTS

When replacement parts are required, have the service technician verify that the replacements he uses

have the same safety characteristics as the original parts. Use of replacements specified by the unit

manufacturer can prevent fire, electric shock, or other hazards.

24 SAFETY CHECK

Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks

recommended by the manufacturer to determine that the unit is in safe operating condition.

25 WALL OR CEILING MOUNTING

The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

26 HEAT

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat.

Read Carefully before Using

Cautions in use of DVD-Video player are described below.

Please read carefully before using a DVD-Video player.

Installation place and handling

- When you place this player near other devices, they may affect poorly together.

- When you place DVD-Video player and TV in the upper and lower sides, it may cause flickering of pictures

or failure (tape is not ejected).

- When you place this player near strong magnetic materials, it may affect image or voice poorly or damage

recording.

- Do not spill volatile liquids like insect spray over the player. Do not leave rubber or plastic products in contact

with the player for a long time. They will cause deterioration or paint peel-off.

Not in use

- When the unit is not in use, be sure to remove the disc or tape and turn off the power.

- If you do not use the unit for a long period, remove batteries in REMOTE to prevent leakage.

- In case you don t use the unit for a long time, the unit may not function properly in the future. Turn on and

use the player occasionally.

Moving

- Repack the unit as it was originally packed at the factory. Alternatively, pack this product with towel not to be

damaged.

- Eject any videotape.

Cleaning

- Dust off dirt in cabinet or control panel part smoothly with a soft cloth.

- For heavy dirt, soak the cloth in a weak detergent solution, wring it well and wipe. Use a dry cloth to wipe it

out.

- Follow instructions in using chemical cleaners.

- Do not use any type of solvent such as gasoline or benzene, as they may cause deterioration or paint peel-off.

Checking

- Video is a high precision device. To obtain a clear screen, we recommend regular inspection and

maintenance every 1,000 hours of use by technical engineers.

- For checking, contact your dealer or your nearest service center.

Checking and Replacement of Antenna

- Antenna is subject to change in its direction or damage by wind and rain. For clean screen, contact and

consult your nearest service center about checking and replacement.

In recording important screen

- Be sure to record the screen and check whether recording is performed properly. We beg you to understand

compensation of recording if recording is not performed by badness of used tape or video.

- Do not use your recordings without permission of a copyrighter except personal usage.

Tape and Disc Handling

- Do not use any tape and disc below. Damage of video head or cut/coiling of tape may cause failure.

Tape with mold

Tape or disc stained with juice or attachments

Tape having breakage connection

Disassembled tape

Disc with severe scratch

Moisture condensation may occur in tape. Moisture condensation damages the tape. Please use the tape

after the moisture condensation is disappeared.

- After use, store tape vertically in a case to prevent loose.

- Do not store the following places.

High temperature and humidity

Subject generation of mold

Subject to direct sunlight

Much dirt or dust

Near strong magnetic materials such as speaker

Important Safeguards

Read Carefully before Using

Advantages of This Product Are....

Idenificatuion of Controls

front palel

rear panel

remote Controller

instructions in using remote

Connecting with TV

Connecting with Cable box

Connecting with other vcr or camcorder

Language Setup Manu

Select Manu Language

Select Audio Language

Select Subtitle Language

Display setup Manu

Set TV Display Mode

Set TV Type

Set Plcture Mode

Audio setup Manu

DigitalSETUP

Dual mono (1+1) setup

Dynamic Range compression setup

Parental Lock Setup Manu

Parent Lock Setup

Change Password

Others Setup Menu

FM Transmitter

Screen Saver

VCR Setup Manu

VCR OSD (One Screen Display)

VCR Auto Play

VCR Auto Repeat

Operating TV Tuner

TV Channel Set

CATV Channel Set

Contents

Other's Operation

Using a zoom function

Anglr

To skip chapter in a DVD

To Play It Fast

To Play It Slow

Repeating a Defined Period

Confirming The Current Disc Mode

To Display Menus In a Disc

Repeating a Defined Period (DVD)

About VCR

Video Head Cleaning

Erasure Protection

What is Dew Condensation System

About DVD

Playable Disc

Handling Disc

Cleaning Disc

Terms related with DVD

Before Doubting about troubles (DVD)

Before Doubting about troubles (VCR)

Specifications

VCR Part

DVD Part

Advantages of This Product Are .....

BUILT-IN TV TUNER (TV/CATV)

Hi-Fi stereo system [VCR]

Digital Auto Tracking [VCR]

BACK LIGHTING OF FUNCTION BUTTONS

EXTERNAL IR REMOTE CONTROLLER WITH RECEIVER

DEW & HEAT SENSORS FOR TAPE PROTECTION

AUTO START FUNCTION

DC power Supply (2 kind of DC 12v inputs)

DVD, VCD, CD, CD-R(MP3), CD-RW, VHS playback function

Watching DVD for recording broadcast

Integrated REMOTE (VCR, DVD)

MP3 file playback function (CD-R disc having records of MP3 files)

Various video type-supported ( NTSC and PAL)

GUI (Graphical User Interface) OSD (On Screen Display)

Screensaver function [DVD]

Slow Forward / reverse (DVD) playback

Fast Forward / reverse playback

Various TV aspect (DVD)

- 4:3 for Pan and Scan, 4:3 for Letter Box, and 16:9 for Wide

Repeat playback (title and chapter for DVD, track and disc for VCD/CD)

Selective Play (DVD/VCD/CD)

- You can select and play the desired title / chapter of DVD and track of Video CD/CD in STOP mode.

Screen zoom function (DVD/VCD)

Parental Lock function (DVD)

- This function can prevent playback of software that may be unsuitable for children.

Multi Angle function (DVD)

- This function allows you to choose the viewing angle of scenes which were shot from a number

of different angles. (The number of angles depends on the software.)

Built-in Dolby Digital decoder (DVD)

Multi Subtitle function (DVD)

- The subtitle can be seen in up to 8 languages. In the case of SVCD or CVD, it depends on the disc. (The

number of subtitle languages depends on the software.)

Multi Audio function (DVD)

- The audio soundtrack can be heard in up to 8 languages. In the case of SVCD or CVD,

it depends on the disc.(The number of audio languages depends on the software.)

Composite video out

Front Panel

OPEN/CLOSE

Identification of Controls

Open/Close button

If this key is pressed while power is supplying .

disc tray will open,the open/close button lamp will

light up in red then insert the disc and

the disc will be played automatically

Playback/Pause button(DVD)

Playback disc press this button to pause a screen

the pause lamp will blink in pause mode

Stop button(DVD)

Use to stop playing

Disc tray

DVD Disc lamp

VCD Disc lamp

CD/MP3 Disc lamp

Press to select the next track or to

playback back rapidly when the disc is to playback

back rapidly, the rewind button will light up in red

Fast forward button

/ the former track select button

Press to select the former track or to

playback rapidly when the disc is to playback

rapidly, the fast forward button

will light up in red

Rewind button

/ the next track select button

Audio/Video in jack

Connect these jack to the audio/video out jacks

terminal of your game machine or camcorder using

the RCA cord provided.

Remote control receiver.

Autorepeat lamp

During auto repeat operation,

auto repeat lamp will light up in red.

HI-FI Lamp

In the Hi-Fi out mode, the lamp will light up in red

DEW/HEAT lamp

When power is on, tis indicator flashes red to

indicate excessive moisture buildup inside the VCR.

The unit will not operate unit it dries out sufficiently

(the tape can be ejected from the unit)

When DEW mode has been activated,

leave the unit on the allow it to dry out completely.

REC key

Press the REc key for at least one second to

start recording.

Fast forward/Cue key

It this key is pressed in the Playback mode,

the VCRenters the forward picture search mode.

If pressed in stop mode,the the tape will fast

forward at hig speed. The FF indicator lamp will

up in red.

Play key.

Press this key to playback a recorded tape,

or to release special operation such as the search mode.

In the playback mode the playback indicator lamp will

be light in red, and Auto Tracking mode,

this indicator lamp will blink.

Cassette-In Lamp.

When the cassette is inserted,

the CST-IN lamp will light up in green.

Eject Key.

Press this button to eject tape.

If this key is pressed in the PLAYBACK mode,

the VCR enters the reverse picture search mode.

If pressed in STOP mode,

then the tape will rewind at high speed.

The REW indicator lamp will up in red.

Rewind / Review key.

Stop key.

Press this button to stop tape.

Power Key

Cassette Compartment

When power is supplied to the set,

the power indicator lamp will always light up in red.

The Power ON and Power OFF mode will be toggled

by pressing this key.

When the POWER is switched on,

the power lamp will light up in red the other keys will

light up in green.

Rear Panel

VIDEO OUT Connector.

Connect this terminal to VIDEO IN terminal of your TV

, using the RCA cord .

Connect this terminal to VIDEO IN terminal of your TV

, using the RCA cord .

IR INPUT

Connect this terminal to remote control out.

DIGITAL OUT Connecter

S/W OUT Connector

Connect the TV antenna

(or cable if available- home use) to this

connector.

RF OUT Connector.

This connectors provides an interface

to the antenna input connectors terminal of your

television using a coaxial cable.

Tuner the television to channel 3 or 4

to watch video tapes.

DC JACK IN (DC 12V)

For car using, we recommend to use this connector

with 3-wire system.

* Connector description for 4

GND

ACC 12V

VEHICLE BATTERY 12V

ANT IN Connector.

DC 12V IN JACK ( Round type)

To use this connector, below Convert-Adapter

accessory should be locked into above connector 4.

( Convert-Adapter)

* Please note :

We highly recommend to connect the unit

corresponding to the 3-wire system of 4.

Thus, to make sure a proper working

of power-off tape guide.

Beyond it, the unit will automatically change

to standby mode after turning off the vehicle in

order to save the car battery.

Caution : Make use of AC/DC Adaptor

( Ripple Voltage: Max 500mV)

DVD OUT Connector.

AUDIO IN (AV1)

Connector this terminal to AUDIO OUT terminal of your

Game machine, Camcorder, using the RCA cord

For displaying this Rear A/V input connected, Input

Signal should be set to "AV1" in Menu setting mode.

Connect this terminal to VIDEO IN terminal of your TV

, using the RCA cord .

To enjoy sound quality of theater lev el in home,

connect this jac k with amp or unit embedded with

digital audio decoder

REMOTE CONTROLLER

OPEN/CLOSE

ANGLE SUBTITLE AUDIO REPEAT

REPEAT A-B ZOOM TOP MENU MENU

SETUP

PROGRAM

A/V SEL.

RETURN

CLEAR

MUTE

GOTO

PBC

STEP

SLOW

FFPLAY/PAUSEREW

F.SKIPSTOP

EJECTA. SEARCH

PLAYREW FFSTOP

ENCORE

PAUSE/STILL

AUDIO

REPLAY

--- TRK ---

R.TRK

REC

--- CH ---

R.SKIP

POWER

VCR

CH3/CH4

TV/VCR

ENTER

DISPLAY

DVD & VCR Power On/Off

REPEAT Playback button [DVD]

MENU button

TITLE MENU button

MOVE in OSD button

A/V SEL button

OSD DISPLAY button

RETURN button

CLEAR button

PROGRAM button

MUTE button

GOTO button

PBC button

FF button

F.SKIP button

CH3/CH4 button [VCR]

EJECT button [VCR]

Auto Search button [VCR]

FF button [VCR]

STOP button [VCR]

AUDIO button [VCR]

REC button [VCR]

REPLAY button [VCR]

Tracking - (ManuallyaTracking in playback mode)

/Channel - (in TV or CATV mode)button [VCR]

Tracking + (ManuallyaTracking in playback mode)

/Channel + (in TV or CATV mode)button [VCR]

RE-Tracking button [VCR]

Encore button [VCR]

Pause/Still button [VCR]

Playback button [VCR]

Rewind button [VCR]

TV /VCR button [VCR]

STOP button [DVD]

R.SKIP button [DVD]

Play/Pause button [DVD]

Rewind button [DVD]

Step button [DVD]

Slow button [DVD]

Number button [DVD]

Setup button [DVD]

Enter button [DVD]

Zoom button [DVD]

Repeat A-B button [DVD]

Angle button [DVD]

Open/Close button [DVD]

Subtitle button [DVD]

Audio button [DVD]

Instructions in Using REMOTE

Operate REMOTE within 7m

from the unit.

Do not press 2(two) buttons at

the same time.

Do not light up sending part of

REMOTE

Do not keep in the place with

much dust and humidity

Connecting with TV

How to Connect with RF cable

INPUT 1

ANT IN

INPUT 2

REAR PANEL OF DVD-VIDEO

OUTSIDE ANTENNA OR

WALL ANTENNA OUTLET

REAR PANEL OF TV

RF CABLE

■

In the initial SET, exclusive channel for video is set to CH 3. To change this setting, set again in

CHANNEL SET screen in VCR operation.

■

In connecting RF cable to TV, set TV channel to CH3.

1. Remove circular cable (RF cable) (surplus cable) plugged in ANT.IN Jack in rear panel of TV. Connect the

cable to ANT.IN jack in rear panel of DVD-Video.

2. Connect TV to DVD-Video. Connect RF OUT jack in DVD-Video with ANT.IN jack in TV with RF cable.

INPUT 1

ANT IN

INPUT 2

REAR PANEL OF TV

AUDIO/VIDEO CABLE

REAR PANEL OF DVD-VIDEO

3. (If there is AUDIO/VIDEO INPUT jack in TV)

Connect VIDEO OUT jack in DVD-Video to VIDEO IN jack in TV, and AUDIO OUT jack in DVD-Video to

AUDIO IN jack in TV with connecting cable of Audio/Video jack.

Select VCR mode by pressing TV/INPUT button in TV, you can view more clear screen and sound than

connection with RF cable only.

VHF: 2 ~13 channels of TV

UHF: 14~69 channels of TV

CATV: Broadcasting is transmitted with cable from broadcasting station by contract with the station and

consumers. It does not need any antenna.

In/Out jack in Audio/Video terminal:

- In: A jack used to receive signal required in this unit from other units.

- Out: A jack used to send signal of this unit to other units.

Connect with Audio/Video terminal, you can enjoy more clear video and audio.

(Use OUTPUT button in this REMOTE to select video mode.)

CHECK UP!

Connecting with Cable Box

If your cable system only requires you to use a converter box for some channels

(i.e., pay-TV channels), follow these steps: Find the primary incoming RF cable.

Plug this cable into a splitter (available at your local electronics store.)

Connect one RF cable between one OUT terminal on the splitter and the IN terminal on the converter box.

Connect another RF cable between the other OUT terminal on the splitter and the A-IN terminal

on an A/B switch available at your local electronics store.)Connect a third RF cable between

the OUT terminal on the converter box and the B-IN terminal on the A/B switch.

Connect a RF cable between the OUTterminalon the A/B switch and the ANT. IN on your DVD-VIDEO.

When the A/B switch is in the B position,use the converter box to change channels ; when the A/B switch is

in the A position, use the DVD-VIDEO to change channels.

How to watch general broadcasting with recording CATV

CHECK UP!

1. Set Channel Select switch of Converter Box to CH 3 or 4 as same as video

exclusive channel. Press [SET] button in [VCR] operation to set video exclusive channel

in CHANNEL SET screen.

2. Press channel button of Converter Box to select channel to be recorded. In this case,

if you want to watch CATV to be recorded, press [TV/INPUT] button of TV to select Out(VCR) .

3. Press [REC] button in DVD-Video.

4. To watch general broadcasting, press channel button in TV to select the desired channel.

For some types of TV, you should press [TV/INPUT] button in TV REMOTE and convert from Out 1

( VCR 1) or Out 2(VCR 2) mode to Broadcasting Channel mode to change TV channel.

Change channel selection of CATV receiver in recording, contents of recording is changed.

Connecting with Other VCR or Camcorder

1. Connect AUDIO/VIDEO OUT jack in Camcorder(or playback video) to AUDIO/VIDEO IN jack

in rear panel (or front panel) of DVD-Video with connecting cable.

2. Connect ANT. IN jack in TV to RF.OUT jack in DVD-Video with RF cable.

3. To record contents of camcorder or playback video with DVD-Video, insert recording

tape attached recording tab in DVD-Video.

How to Copy(Edit) Tape with Other VCR or Camcorder

1. Turn on DVD-Video.

2. Press [OUTPUT] button of remote control and adjust DVD-Video to display

"External Input 1" or "External Input 2" in TV screen.

3. Press [PLAY] button in Camcorder or playback video.

4. Press [REC] button in DVD-Video if you want to record contents of camcorder or playback video.

5. Press [Pause] button in DVD-Video when unnecessary or undesired scene is displayed in recording.

(Caution) Recording is released automatically after 5 minutes since pressing [PAUSE] button.

Press [REC] button if you want to record again.

How to Playback Chapter Photographed by Camcorder

1. Turn DVD-Video on.

2. Press [OUTPUT] button of remote control and adjust DVD-Video to display External Input 1

or External Input 2 in TV screen.

3. Insert tape in camcorder and playback it.

Select DISC Menu Language

SETUPM MENU

VCR SETUP

LANGUAGE SETUP

DISPLAY SETUP

AUDIO SETUP

PARENTAL SETUP

OTHERS SETUP

LANGUAGE SETUP

EXIT SETUP

1. Press the "SETUP" button on the remote control.

The initial MENU is displayd.

3. Press the SHIFT button

LANGUAGE SETUP MENU

DISC MENU

AUDIO

SUBTITLE

LANGUAGE SETUP

MAIN MENU

ENGLISH

FRANCAIS

DEUTSCH

ESPANOL

ITALIANO

LANGUAGE SETUP MENU

DISC MENU

AUDIO

SUBTITLE

LANGUAGE SETUP

MAIN MENU

ENGLISH

FRANCAIS

DEUTSCH

ESPANOL

ITALIANO

4. Press the SHIFT ( or SHIFT ) button unit for the

appropriate system is selected. and Press the

ENTER button to activate the selected.

( English francais deutsch espanol

italiano)

LANGUAGE SETUP MENU

DISC MENU

AUDIO

SUBTITLE

LANGUAGE SETUP

MAIN MENU

ENGLISH

FRANCAIS

DEUTSCH

ESPANOL

ITALIANO

Select AUDIO Language

SETUPM MENU

VCR SETUP

LANGUAGE SETUP

DISPLAY SETUP

AUDIO SETUP

PARENTAL SETUP

OTHERS SETUP

LANGUAGE SETUP

EXIT SETUP

1. Press the "SETUP" button on the remote control.

The initial MENU is displayd.

2. Press the select(ENTER) button.

then the LANGUAGE SETUP menu is displayed.

3. Press the SHIFT button to select(ENTER) the

"AUDIO", then the AUDIO menu is displayed.

LANGUAGE SETUP MENU

DISC MENU

AUDIO

SUBTITLE

LANGUAGE SETUP

MAIN MENU

ENGLISH

FRANCAIS

DEUTSCH

ESPANOL

ITALIANO

LANGUAGE SETUP MENU

DISC MENU

AUDIO

SUBTITLE

LANGUAGE SETUP

MAIN MENU

ENGLISH

FRANCAIS

DEUTSCH

ESPANOL

ITALIANO

4. Press the SHIFT button.

LANGUAGE SETUP MENU

DISC MENU

AUDIO

SUBTITLE

LANGUAGE SETUP

MAIN MENU

ENGLISH

FRANCAIS

DEUTSCH

ESPANOL

ITALIANO

5. Press the SHIFT ( or SHIFT ) button

unit for the appropriate system is selected.

and Press the ENTER button to activate the

selected.

2. Press the select(ENTER) button

then the LANGUAGE SETUP MENU is displayed.

LANGUAGE SETUP MENU

to enter the selected menu.

( English francais deutsch espanol

italiano)

Select SUBTITLE Language

SETUPM MENU

VCR SETUP

LANGUAGE SETUP

DISPLAY SETUP

AUDIO SETUP

PARENTAL SETUP

OTHERS SETUP

LANGUAGE SETUP

EXIT SETUP

1. Press the "SETUP" button on the remote control.

The initial MENU is displayd.

2. Press the select(ENTER) button

then the "LANGUAGE SETUP" is displayed.

LANGUAGE SETUP MENU

DISC MENU

AUDIO

SUBTITLE

LANGUAGE SETUP

MAIN MENU

ENGLISH

FRANCAIS

DEUTSCH

ESPANOL

ITALIANO

3. Press the SHIFT button to select (ENTER)

the "SUBTITLE".

Then the SUBTITLE menu is displayed.

LANGUAGE SETUP MENU

DISC MENU

AUDIO

SUBTITLE

LANGUAGE SETUP

MAIN MENU

ENGLISH

FRANCAIS

DEUTSCH

ESPANOL

ITALIANO

4. Press the SHIFT button

to enter the selected menu.

OFF

5. Press the SHIFT ( or SHIFT ) button unit for the

appropriate system is selected.

and Press the ENTER button to activate the selected menu.

( English francais deutsch espanol italiano OFF )

LANGUAGE SETUP MENU

DISC MENU

AUDIO

SUBTITLE

LANGUAGE SETUP

MAIN MENU

ENGLISH

FRANCAIS

DEUTSCH

ESPANOL

ITALIANO

OFF

Page is loading ...

PYLE Audio PLDVCR500 User manual

Brand: PYLE Audio

Model: PLDVCR500

Category: DVD players

Type: User manual

This manual is also suitable for

PLDVCR600

Download PDF

report

PYLE Audio PLDVCR500 User manual

This manual is also suitable for

PYLE Audio PLDVCR500 User manual

Related papers

Other documents