Transport GT20
B5151
Service Engineer’s Manual
PREFACE
Copyright
This publication, including all photographs, illustrations, and soft-
ware, is protected under international copyright laws, with all rights
reserved. Neither this manual, nor any material contained herein,
may be reproduced without written consent of the manufacturer-.
Copyright 2005
Version 1.0
Disclaimer
Information contained in this document is furnished by TYAN Com-
puter Corporation and has been reviewed for accuracy and reliability
prior to printing. TYAN assumes no liability whatsoever, and dis-
claims any express or implied warranty, relating to sale and/or use of
TYAN products including liability or warranties relating to fitness for
a particular purpose or merchantability. TYAN retains the right to
make changes to product descriptions and/or specifications at any
time, without notice. In no event will TYAN be held liable for any
direct or indirect, incidental or consequential damage, loss of use,
loss of data or other malady resulting from errors or inaccuracies of
information contained in this document.
Trademark Recognition
All registered and unregistered trademarks and company names
contained in this manual are property of their respective owners
including, but not limited to the following.
TYAN and Transport GT20 B5151 are trademarks of TYAN Com-
puter Corporation.
Intel, Prescott, and combinations thereof are trademarks of Intel
Corporation.
Award, AwardBIOS are trademarks of Phoenix Technologies.
Microsoft Windows is a trademark of Microsoft Corporation.
IBM, PC, AT, PS/2 are trademarks of IBM Corporation.
Winbond is a trademark of Winbond Electronics Corporation.
Portable Document Format (PDF) is a trademark of Adobe Corpora-
tion.
ii
Federal Communications Commission (FCC)
Notice for the USA Compliance Information State-
ment (Declaration of Conformity Procedure) DoC FCC
Part 15: This device complies with part 15 of the FCC
Rules
Operation is subject to the following conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received including inter-
ference that may cause undesired operation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and the
receiver.
– Plug the equipment into an outlet on a circuit different from
that of the receiver.
Consult the dealer on an experienced radio/television technician for
help.
Notice for Canada
This apparatus complies with the Class B limits for radio interference
as specified in the Canadian Department of Communications Radio
Interference Regulations. (Cet appareil est conforme aux norms de
Classe B d’interference radio tel que specifie par le Ministere Cana-
dien des Communications dans les reglements d’ineteference
radio.)
Notice for Europe (CE Mark) This product is in conformity
with the Council Directive 89/336/EEC, 92/31/EEC
(EMC).
CAUTION: Lithium battery included with this board. Do not puncture,
mutilate, or dispose of battery in fire. Danger of explosion if battery
is incorrectly replaced. Replace only with the same or equivalent
type recommended by manufacturer. Dispose of used battery
according to manufacturer instructions and in accordance with your
local regulations.
iii
About this Manual
This manual provides you with instructions on installing your
Transport GT20. This manual is intended for experienced users and
integrators with hardware knowledge of personal computers.
This manual consists of the following parts
Chapter 1: Provides an Introduction to the Transport GT20
B5151 barebone, packing list, describes the
external components, gives a table of key compo-
nents, and provides block diagrams of the system.
Chapter 2: Covers procedures on installing the CPU, mem-
ory module, PCI-X card, and hard drive.
Chapter 3: Covers removal and replacement procedures for
pre-installed components
Appendix: Describes the differences between mainboard
BIOS and system BIOS. The cable connection
tables are also provided for reference of system
setup.
For information on the mainboard, please refer to the attached main-
board user’s manual. You can find the detailed description about
jumper and BIOS settings from the motherboard manual.
iv
SAFETY INFORMATION
Before installing and using the Transport GT20, take note of the fol-
lowing precautions:
– Read all instructions carefully.
– Do not place the unit on an unstable surface, cart, or stand.
– Do not block the slots and opening on the unit, which are pro-
vided for ventilation.
– Only use the power source indicated on the marking label. If
you are not sure, contact the Power Company.
– The unit uses a three-wire ground cable, which is equipped
with a third pin to ground the unit and prevent electric shock.
Do not defeat the purpose of this pin. If your outlet does not
support this kind of plug, contact your electrician to replace
your obsolete outlet.
– Do not place anything on the power cord. Place the power
cord where it will not be in the way of foot traffic.
– Follow all warnings and cautions in this manual and on the
unit case.
– Do not push objects in the ventilation slots as they may touch
high voltage components and result in shock and damage to
the components.
– When replacing parts, ensure that you use parts specified by
the manufacturer.
– When service or repairs have been done, perform routine
safety checks to verify that the system is operating correctly.
– Avoid using the system near water, in direct sunlight, or near
a heating device.
– Cover the unit when not in use.
v
Table of Contents
Chapter 1:Overview
1.1 About the Transport GT20 B5151 . . . . . . . . . . . . . . . . . . . . . . . . .1
1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.3 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.4 About the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.4.1 Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.4.2 Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.4.3 LED Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.4.4 Internal View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.4.5 Motherboard Block Diagram. . . . . . . . . . . . . . . . . . . . . . . . 9
1.4.6 Motherboard Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Chapter 2:Setting Up
2.0.1 Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.0.2 Work Area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.0.3 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.0.4 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.1 Rack Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.1.1 Installing the Server in a Rack. . . . . . . . . . . . . . . . . . . . . .15
2.2 Installing Motherboard Components. . . . . . . . . . . . . . . . . . . . . . . 19
2.2.1 Removing the Chassis Cover. . . . . . . . . . . . . . . . . . . . . . . 19
2.2.2 Installing the CPU, Heatsink and Air Duct . . . . . . . . . . . . 20
2.2.3 Installing the Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
2.2.4 Installing a PCI Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
2.3 Installing the Hard Drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
2.4 Installing the Slim FDD (Option) . . . . . . . . . . . . . . . . . . . . . . . . . 29
Chapter 3:Replacing Pre-Installed Components
3.1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
3.1.1 Work Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
3.1.2 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
3.1.3 Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
3.2 Disassembly Flowchart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
3.3 Removing the Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
3.4 Replacing Motherboard Components . . . . . . . . . . . . . . . . . . . . . .35
3.4.1 Disconnecting All Motherboard Cables . . . . . . . . . . . . . . 35
3.4.2 Removing the Motherboard. . . . . . . . . . . . . . . . . . . . . . . . 38
3.5 Replacing the Slim CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
3.6 Replacing the LED Control Board . . . . . . . . . . . . . . . . . . . . . . . .41
3.7 Replacing the M1010 Adapter Board . . . . . . . . . . . . . . . . . . . . . .43
vi
3.7.1 M1010 Adapter Board Features. . . . . . . . . . . . . . . . . . . . . 45
3.7.2 System Fan Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
3.7.3 M1010 Adapter Board Connector Pin Definition . . . . . . .48
3.8 Replacing the SATA Backplane . . . . . . . . . . . . . . . . . . . . . . . . . . 53
3.8.1 SATA Backplane Features. . . . . . . . . . . . . . . . . . . . . . . . . 55
3.9 Replacing the Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Appendix I: BIOS Differences
Appendix II: Cable Connection Tables
Technical Support
Chapter 1: Overview 1
Chapter 1: Overview
1.1 About the Transport GT20 B5151
Congratulations on your purchase of the TYAN Transport
TM
GT20 (B5151), a highly-optimized rack-mountable barebone
system. The Transport GT20 (B5151) offers the latest proces-
sor server system, providing a rich feature set and incredible
performance. Leveraging advanced technology from Intel
®
,
the Transport GT20 (B5151) server system is capable of
offering scalable 32-bit computing, high-bandwidth memory
design, and a lightning-fast PCI-X bus implementation. The
Transport
TM
GT20 (B5151) not only empowers your company
in today’s demanding IT environment but also offers a
smooth path for future application usage.
TYAN is also proud to deliver the Transport
TM
GT20 (B5151)
in SATA flavor while supporting up to four (4) hot-swap hard
drives, one (1) slim CD-ROM and one (1) optional slim floppy
disk drive (not included). The Transport
TM
GT20 (B5151)
uses TYAN’s latest tooling-made chassis featuring a robust
structure, tool-less and modularized design, and a solid
mechanical enclosure. All of this provides the Transport
TM
GT20 (B5151) the power and flexibility to meet the needs of
nearly any server application.
2 Chapter 1: Overview
1.2 Features
Enclosure
• Industry 19” rack-mountable 1U
chassis storage bay
• Storage bay support: Four 3.5”
removable HDD bays, Slim CD-
ROM drive, Slim FDD
• Dimension: D 22.4 x W 17.2 x H
1.72 inch (568 x 436 x 43.6mm)
Processors
• One Socket LGA775 Intel ® Pres-
cott® processor
• 800MHz FSB support
Chipset
• Intel E7221 MCH chipset
• Support for 800MHz FSB
• MCH+ICH6R+PXH-V
• SMSC DME1737 Super I/O chip
Memory
• 128-bit dual channel memory bus
• Four 184-pin DDR DIMM sockets
• Supports up to 4GB of DDR
333/400 SDRAM
• Supports Unbuffered, ECC/non-
ECC type memory modules
Expansion Slots
• One PCI-X, 64-bit 133/100/66MHz
bus support
• One TARO 200-pin SO-DIMM, PCI-
X 133/100/66 MHz support
Back I/O Ports
• One 9-pin COM port
• One 15-pin VGA port
• PS/2 mouse and keyboard ports
• Two USB 2.0 ports
• One RJ45 10/100 Ethernet port, two
RJ45 10/100/1000 Ethernet ports
Front Panel Features
• I/O
(2) USB 2.0 ports
• LED indicators
– One HDD LED, One LAN LED,
One Power LED
• Switches
– Power switch, Reset switch
Harware Monitoring
• Smart auto fan speed control
• Fan Monitoring
• CPU Thermal & Voltage Monitor
support
• Chassis intrusion header
Integrated LAN
• One 10/100 Ethernet LAN controller
– Intel 82551 PCI
• Two GbE LAN controllers
– Two Broadcom BCM5721 PCI
Express GbE LAN controllers
– Operating at (x1) PCI-E interface
– ASF 2.0 support
Integrated Graphic
• 8-bit VGA DAC embedded the Intel
E7721 MCH to support an analog
display.
Integrated Serial ATA (ICH6R)
• 4-port Serial ATA Host controller
embedded
• Supports four serial ports running at
1.5Gb/s
• RAID 0.1 support
Storage
• 4 hot-swappable SATA HDD bays
• Optional slim line DVD-ROM and
FDD
Server Management
• Supports TYAN Server Manage-
ment (TSM)
• Optional TYAN SMDC IPMI V1.5
server management
Power Supply
• EPS 12V, 1U, 350W with PFC
• 100V~240V AC input
Regulatory
• FCC Class B (Declaration of Con-
formity)
• CE (Declaration of Conformity)
Environment
•Operating: 5
o
C~35
o
C
• Non-operating: -40
o
C ~ 70
o
C
Chapter 1: Overview 3
1.3 Unpacking
If any items are missing or appear damaged, contact your
retailer or browse to TYAN’s Web site for service:
http://www.tyan.com.
The Web site also provides information on other TYAN prod-
ucts, plus FAQs, compatibility lists, BIOS settings, and more.
FDDs
1 x Tyan driver CD
SMDC Kit
Power Cords
Left to right: Europe, US
HDD Screws
Mounting Ears & Screws
FDD Kit
FDD Cable
FDD Backplane Cable
FDD Rails & Screws
4 Chapter 1: Overview
.
Mainboard Manual
Barebone Manual
Heatsink x 1
Rail Kit
Mounting Bracket x 4
Screws Kit
Front
Rear
Sliding Brackets
Front L-Bracket x 2
Rear L-Bracket x 2
Sliding Rails x 2
Chapter 1: Overview 5
1.4 About the Product
The following views show you the product.
1.4.1 Front View
*Reserved: reserved for future upgrade
1.4.2 Rear View
CD-ROM Drive
Hard Drive Bay x 4
HDD activity LED
Power switch
Power LED
Reset
switch
USB ports
Warning LED
LAN LED
*Reserved
Power Supply Socket
PS/2 Mouse/Keyboard Ports
Serial Port
VGA Port
PCI-X Slot
USB Port x 2
LAN Port (NIC3)
LAN Port (NIC1)
LAN Port (NIC2)
6 Chapter 1: Overview
1.4.3 LED Definition
Front Panel
Rear I/O LED
LED Color State Description
Power Green
OFF
ON
OFF
Power ON
Power OFF
HDD Activity Amber
OFF
Radom Blink
OFF
HDD access activity
No disk activity
LAN1/LAN2 Activity Green Blink LAN access activity
Warning Reserved LED for future upgrade. It is not functional in
the B5151 barebone now.
Hot Swappable HDD
Tray Power LED
Green
OFF
ON
OFF
Power connected
Power disconnected
Hot Swappable
HDD Tray Access
LED
Reserved LED for future upgrade. It is not functional in
the B5151 barebone now.
LED Color State Description
RJ45 NIC1 Linkage
(Left Side)
Green
Green
OFF
ON
Blinking
OFF
LAN linked
LAN accessing
No LAN linked
RJ45 NIC1 Mode
(Right Side)
Amber
Green
OFF
ON
ON
OFF
Gigabit mode
100M mode
10M mode
RJ45 NIC2 Linkage
(Left Side)
Green
Green
OFF
ON
Blinking
OFF
LAN linked
LAN accessing
No LAN linked
RJ45 NIC2 Mode
(Right Side)
Amber
Green
OFF
ON
ON
OFF
Gigabit mode
100M mode
10M mode
Chapter 1: Overview 7
NOTE: “Right” or “Left” is viewed from the rear.
RJ45 NIC3 Linkage
(Left Side)
Green
Green
OFF
ON
Blinking
OFF
LAN linked
LAN accessing
No LAN linked
RJ45 NIC3 Mode
(Right Side)
Green
OFF
ON
OFF
100M mode
10M mode
8 Chapter 1: Overview
1.4.4 Internal View
2
4
12
10
11
5
6
7
8
1. PCI-X Slot
2. Link Bar
3. Memory Slots
4. EPS 12V Power Supply
5. Air Duct
6. System Fans (Left to right:
FAN5, FAN4, FAN3, FAN2,
FAN1)
7. Adapter Board
8. SATA Backplane
9. LED Control Board Cable
10. Tyan TARO Connector
11. SATA Cable
12. CD-ROM Cable
13. USB Cable
14. Four SATA HDDs
3
9
14
13
1
Chapter 1: Overview 9
1.4.5 Motherboard Block Diagram
10 Chapter 1: Overview
1.4.6 Motherboard Layout
64bit 133/100/66MHz PCI-X
X1 PCI Express
32-bit 33MHz (5V) PCI
IDE J17
X1 PCI Express
SO-DIMM
J25PJP24
JP26
LPT
FDD
JP4/JP5/JP6/JP7
JP2
BROADCOM
5721
BROADCOM
5721
JP1
JP13
JP12
JP15
SATA1
SATA3
JP15
SATA4
SATA2
SMDC
JP16
JP18
JP17
JP23
JP17
JP22
BROAD COM
5721
JP3
LAN
LAN
VGA
JP3
COM
PORT
USBX2
LAN
PS/2
Chapter 1: Overview 11
Jumpers & Connectors
Jumper
/Connector
Function
J5 COM2 port
J12 SO-DIMM socket
J20/J21/J22/J23 Serial ATA RAID connectors
JP1/JP2/JP3 LAN2/LAN1/LAN3 disabled headers
JP4/JP7 Front panel LAN1/LAN2 speed LED pin-headers
JP5/JP6 Front panel LAN1/LAN2 link and active LED connec-
tors
JP8 Chassis fan connector
JP20 SMDC connector
JP12/JP13 Front panel USB2.0 connectors
JP14 PCI-X speed select header
JP15 Clear CMOS jumper
JP17/JP18/JP23 Front fan connectors
JP24/JP25 SMDC/ASF2.0 select headers
12 Chapter 1: Overview
Memo
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/