ISSUED: 06-12-08 SHEET #: 090-9148-2 08-27-08
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
1 of 1
SCREEN
BASE
Slide screen onto screen base until screen mounting holes and screen base mounting holes align as shown in
figure 1.1. Attach screen to Plasma stand using four M4 x 25 mm socket pin head screws (A) lock washers (C)
and flat washers (B) as shown in figure 1.2. Tighten with 4 mm security allen wrench (D).
Screen may appear
slightly different
than illustrated
MOUNTING SURFACE NOT
SHOWN FOR CLARITY
A
DC
Model: MIS571
Some parts may appear slightly different than illustrated.
A
Before you start make sure all parts listed are included with your product.
This product is UL Listed. It
must be installed by a qualified
professional installer.
R
IMPORTANT! Read instruction sheet before you start installation and assembly.
• Do not overtighten! Overtightening may cause permanent damage to the screen. Torque to 26-35 in • lb (30-40 kg • cm).
WARNING
B
© 2008, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
fig 1.1
fig 1.2
C
Description Qty Part #
A
M4 x 25 mm socket pin screw 4 520-2082
B M4 flat washer 4 540-2081
C # 8 split lock washer 4 540-2044
D 4 mm allen wrench 1 560-9646
Parts List
B
Installation and Assembly -
Neck Security Fastener Pack for LG Display
Models: 26LG30DC, 32LG30DC, 37LG30DC,
42LG30DC, 47LG50DC, 52LG50DC
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Peerless WL-SR560M-200 Installation guide
-
-
-
-
-
-
-
-
-
Other documents
-
Peerless Industries PRS-UNV-S User manual
-
-
-
-
Hitachi CPA100 Operating instructions
-
-
NEC NP-P474W Installation guide
-
NEC NP-M282X Installation and Setup Guide
-
-