Peerless MIS660 User manual

Brand: Peerless

Model: MIS660

Category: Mounting kits

Type: User manual

Peerless MIS660 is a security fastener pack designed for use with Philips display models. It includes various screws, washers, and an allen wrench for secure installation and assembly of the display. This product is UL Listed and should be installed by a qualified professional installer.

Peerless MIS660 is a security fastener pack designed for use with Philips display models. It includes various screws, washers, and an allen wrench for secure installation and assembly of the display. This product is UL Listed and should be installed by a qualified professional installer.

ISSUED: 09-08-08 SHEET #: 125-9014-2

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

1 of 2

Qty. Part #

A M5 x 25 mm socket pin serreated washer head screw 4 510-1122

B M6 x 20 mm socket pin serreated washer head screw 4 510-9554

C 5/32'' (4mm) security allen wrench 1 560-9646

D # 10 washer 4 540-9400

E M6 x 8 mm socket pin screw 4 520-1255

Parts List

Description

Slide screen onto base until holes align as shown in figure 1.1. Attach screen to stand using four M5 x 25 mm

socket pin serrated washer head screws (A) and flat washers (D) as shown in figure 1.2. Tighten with 4 mm security

allen wrench (C).

D

C

Model: MIS660

Some parts may appear slightly different than illustrated.

A

Before you start make sure all parts listed are included with your product.

This product is UL Listed. It

must be installed by a qualified

professional installer.

R

IMPORTANT! Read instruction sheet before you start installation and assembly.

• Do not overtighten! Overtightening may cause permanent damage to the screen. Torque to 26-35 in • lb (30-40 kg • cm).

WARNING

B

fig 1.1

fig 1.2

Installation and Assembly - Neck Security Fas-

tener Pack for Philips Display Models:

26HFL5830D/27, 32HFL5860D/27, 37HFL5560D/27,

42HFL7580A/27, 42HFL5860D/27, 52HFL5580D/27

A

D

Stand for 26" and 32" Screens

E

ISSUED: 09-08-08 SHEET #: 125-9014-2

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

2 of 2

Place screen adapter base on to base of stand and

secure using four M6 x 20 mm socket pin serrated

washer head screws (B) or four M6 x 8 mm socket pin

screws (E).

2

Slide adapter tubes into hole located on screen. Secure

using two M5 x 25 mm socket pin serrated washer head

screws (A) and washers (D).

A

B or E

Stand for 37/52" Screens

© 2008, Peerless Industries, Inc. All rights reserved.

All other brand and product names are trademarks or registered trademarks of their respective owners.

D

BASE

SCREEN

ADAPTER BASE

BASE MAY BE DIFFERENT

THAN ILLUSTRATED

1
2

Peerless MIS660 User manual

Brand: Peerless

Model: MIS660

Category: Mounting kits

Type: User manual

Peerless MIS660 is a security fastener pack designed for use with Philips display models. It includes various screws, washers, and an allen wrench for secure installation and assembly of the display. This product is UL Listed and should be installed by a qualified professional installer.

Related papers

Other documents