Argos HOMEBASE WOW SWANLEY OAK 150 User manual

Type
User manual

This manual is also suitable for

Argos HOMEBASE WOW SWANLEY OAK 150 is a durable and stylish dining chair, perfect for any home. With its sturdy construction and comfortable design, this chair is built to last. The chair is easy to assemble and comes with all the necessary hardware. Simply follow the step-by-step instructions included in the manual and you'll have your chair assembled in no time. The chair is made of high-quality materials and is designed to withstand everyday use. The seat is made of a durable fabric that is easy to clean and maintain.

Argos HOMEBASE WOW SWANLEY OAK 150 is a durable and stylish dining chair, perfect for any home. With its sturdy construction and comfortable design, this chair is built to last. The chair is easy to assemble and comes with all the necessary hardware. Simply follow the step-by-step instructions included in the manual and you'll have your chair assembled in no time. The chair is made of high-quality materials and is designed to withstand everyday use. The seat is made of a durable fabric that is easy to clean and maintain.

Vendor Name: TORCH 2100 CO., LTD.
Product Name: WOW SWANLEY OAK 150 TABLE
Code: 3070051, 3070037
Date:
7/7/2014
Instruction Manual 1 of 6
Inst ruc t ion Manual
Insert Additional Pages If Required.
Document No.: D114 Issue: 011 Approved: MP/DA Page 19 of 34
Vendor Name: TORCH 2100 CO., LTD.
Product Name: WOW SWANLEY OAK 150 TABLE
Code: 3070051, 3070037
Date:
7/7/2014
Instruction Manual 2 of 6
Inst ruc t ion Manual
Insert Additional Pages If Required.
Document No.: D114 Issue: 011 Approved: MP/DA Page 20 of 34
Dining Chair
Assembly Instructions - Please keep for future reference 603/4135
603/2333
Important
- Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Issue 1 - 08/09/13
Dimensions
Width - 44cm
Depth - 54cm
Height - 92cm
603/2900
133/6948
602/9834
603/2364
1
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
Warnings
Care and maintenance
Assemble this product on a flat
surface.
Assemble all parts loosely
before tightening any bolts.
• Do not discard any of the
packaging until you have
checked that you have all the
parts and the pack of fittings.
• Discard all extra fittings and
keep fittings out of reach of
children.
• Unit weight: 4.9kgs.
• Maximum safe weight of user:
110kgs.
• Retain Assembly Instructions
for future reference.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• This product should only be
used on firm, level ground.
• Make sure the legs remain in
contact with the ground.
• Do not stand on the product.
• Please clean the product using
either damp (not wet) cloth and
a mild domestic soap solution or
by using an appropriate polish.
• Do not use any abrasive
materials when cleaning.
• From time to time check that
there are no loose bolts on this
unit.
2
Components - Parts
Components - Fittings
Please check you have all the parts listed below
Please check you have all the fittings listed below
Backrest
(36 x 10 x 92cm)
M6 x 50mm Bolt x 9
If you have damaged or missing components,
call the Customer Helpline: 08456 400800
Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
1 Seat
(43.5 x 41 x 9.5cm)
2 Leg x 2
(3 x 3 x 43cm)
3
A
Ruler - Use this ruler to help correctly identify the screws
0 15 30 45 60 75 905 20 35 50 65 80 9510 25 40 55 70 85 100 120 140105 125 145110 130 150115 135 155 160 165 170
Flat washer x 9
C
Spring washer x 9
B
Allen key x 1
D
3
Place the backrest on a
flat protected surface.
Position the seat on
the backrest as
shown and fix using bolts
, spring washers
and washers .
Important:
Fasten bolts
using allen key
but do not fully
tighten at this
stage.
Note:
Use oval head of
allen key on
tight angles.
Assembly Instructions
Step 1
Step 2
1
2
2
3
3
3
A
D
D
A
A
A
A
A
C
B
C
B
C
B
C
CB
A CB
C
B
B
Attaching backrest
2
1
A
C
B
A
C
B
A
B
C
A
C
B
A
C
B
A
C
B
A
C
B
2
1
A
C
B
Attaching legs
Place the seat upside
down on a flat protected
surface.
Insert the legs into the
holes of the seat as
shown and fix using bolts
, spring washers
and washers .
Important:
Fasten bolts
using allen key
but do not fully
tighten at this
stage.
Note:
Use oval head of
allen key on
tight angles.
2
3
A
D
D
B
C
2
4
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
D
D
Assembly Instructions
Aligning & securing the
legs
Carefully turn the chair
upright and place on a
flat surface.
a: Tighten all bolts using
allen key .
Note:
Use oval head of allen
key on tight angles.
Note: This step is
essential to prevent the
chair from wobbling due
to uneven legs.
b: Carefully sit on the
chair and make
adjustments to ensure
the legs are flat even on
the floor.
c: After the sitting test,
re-tighten bolts again if
any adjustment is
needed.
Note: It is highly
recommended to
re-tighten all bolts after
using the chair for 7
days.
Note: Keep allen key to
re-tighten bolts when
required.
D
D
Assembly is complete.
Step 3
a:
b:
c:
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Argos HOMEBASE WOW SWANLEY OAK 150 User manual

Type
User manual
This manual is also suitable for

Argos HOMEBASE WOW SWANLEY OAK 150 is a durable and stylish dining chair, perfect for any home. With its sturdy construction and comfortable design, this chair is built to last. The chair is easy to assemble and comes with all the necessary hardware. Simply follow the step-by-step instructions included in the manual and you'll have your chair assembled in no time. The chair is made of high-quality materials and is designed to withstand everyday use. The seat is made of a durable fabric that is easy to clean and maintain.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI