Beech Effect Book Tidy
Assembly Instructions
-
Please keep for future reference
719/0023
Dimensions
Depth - 23.5cm
Width - 63.1cm
Height - 74cm
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the
Customer Helpline: 08456 400800
Verson 2 Date: 05/04/11
Safety and Care Advice
Important - Please read these instructions fully before starting assembly
Care and maintenance
• Check you have all the
components and tools listed on
pages 2 and 3.
rom the
plastic bags and separate them
into their groups.
• Keep children and animals away
from the work area, small parts
could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand on the product,
this could cause damage.
• Assemble the item as close to
room) as possible.
• Assemble on a soft level surface
to avoid damaging the unit or your
r.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• Note: Only apply the glue once
you are sure of the assembly.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority waste
disposal centre.
• Do not use this item if any
components are missing or
damaged.
IMPORTANT: RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
• Argos Ltd. MK9 2 NW. • This product is suitable for
children in the age 6 or above,
or the maximum weight of 15
kgs.
• Assembly to be carried out by
the competent adult only.
• During assembly children should
be kept away from the product due
to the potential risk of injury.
• Regularly check all fastenings
to ensure that they are properly
tightened.
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
1
2
Components - Panels
Please check you have all the panels listed below
If you have damaged or missing components,
call the Customer Helpline: 08456 400800
Side panel x 2
(74 x 23.5cm)
1
Nonwoven
(138.3 x 59.8cm)
3
Support x 5
(60 x 6cm)
2
3
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
105
110 115 120 125 130 135 140 145 150 155 160 165 170
Tools required
Ruler - Use this ruler to help correctly identify the screws
110 120 130 140 1500 10 20 30 40 50 60 70 80 90 100
0 1 2 3 4 5 6
Phillips screwdriver
(medium & large)
Small
hammer
Ruler/tape
measure
Eye protection
(when using a
hammer or glue)
Bradawl
(or sharp point)
Screw cover x 20
Note: The quantities below are the correct amount to complete the assembly. in some cases mor
may be supplied than are required.
Components - Fittings
A
B
C
D
E
Wall plug x 1
Wall strap x 1
50mm Screw x 20
14mm Screw x 1
(This screw is
included in the
wall strap bag)
x 1
4
Assembly Instructions
Step 1
Step 2
Fitting the support
Supports onto the Side
panel .
A
B
B
B
B
B
A
A
A
A
1
2
2
2
2
2
Use Screw covers to
cover the Screw heads.
A
B
2
1
Fitting the nonwoven
the unit.
Finished
front edge
3
3
Note:
It would be useful
to ask someone to help
you at the stage.
Step 3
Assembly Instructions
5
B
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
1
Attaching right side
panel
panel onto unit.
A
Use Screw covers to
cover the Screw heads.
B
1
Side
Step 4
Assembly Instructions
If you need help or have damaged or missing parts, call the
Customer Helpline: 08456 400800
6
It is recommended that the
strap onto the top panel.
With help, move Book tidy
into position.
remove Book tidy .
Drill a hole and insert Wall
plug .
Reposition media tower
Screw .
Fixing to wall
Warning:
The
Book tidy
is heavy.
Lift with care.
Warning:
Before drilling,
check wall for
hidden pipes and
cables.
C
D
E
D
Book tidy
wall
C
D
E
D
D
E
Note:
Wall plugs supplied are
for solid wall only.
be used for your wall, seek
professional advice if in doubt
D
Assembly is complete.
/
