User guide WP S 210 F1 page 1
Audio Vertriebs-
Entwicklungsgesellschaft
mbH
WP S 210 F1
Digital procession loudspeaker
User guide
Thank you very much for choosing the digital procession loudspeaker WP S 210 F1 of the
company A.V.E.
Included in the scope of delivery:
2 horn loudspeaker
1 radio microphone or 1 clip-on microphone
1 dynamic wired microphone
1 micophone cable (Length 5 m)
1 tripod
1 battery charger
1 carrying strap
1 carrying bag
The following features are marking the WP S 210 F1:
DSP (Digital Signal Processor) controlled technique with:
separate adjustable inputs for two radio microphones with licensed frequency
separate adjustable input for a cable microphone
separate adjustable input for an USB-Stick or MP3 player
separate adjustable AUX input for an external signal source e.g: CD or recorder.
Separate adjustable heights, middles depths
AUX out for affiliation
Sum volume
40 watts of dual digitally power amplifier
2 weatherproof pressure chamber loudspeakers à 20 watts
Main switch
LED battery-controlling display
Battery-loading socket
Connection socket for external net part
Removable antenna
Illuminated display announcement
Dimensions without loudspeakers: 860 x 83 x 40 mm
Weight without loudspeakers: approx. 5 kg
The following variations are available:
WP S 210 F1-H with one headset micro
WP S 210 F1-AT with one handhold radio or clip-on micro and two sound columns
WP S 210 F1-AT-H with one headset micro and two sound columns
WP S 210 F2 with two handhold radio micros or clip-on micros
WP S 210 F2-H with two headset micros
WP S 210 F2-AT with two handhold radio micros or clip-on micros and two sound columns
WP S 210 F2-AT-H with two headset micros and two sound columns
All models of the WP S 210 series are equipped with the most modern radio
technology from Sennheiser.
Technical changes reserved
User guide WP S 210 F1 page 2
1 charging socket 7 battery indicator
2 power switch
8 USB port
3 multifunction display 9 play/pause button
4 stop button 10 edit button
5 next button 11 volume control 1
6 input AUX 12 output AUX
13 input microphone
Please note:
The batteries must be charged on the eve before the use oft the system.
The charging is performed in the power-off mode.
Connect the WP S 210 with the charger. The LED of the charger lights red.
The LED is blinking when the battery if fully charged. Now the system is ready for use.
When the LED is flashing quickly there is a temperature error. The charger must be disconnected until
the battery has cooled down. The procedure can subsequently be repeated.
Functions:
The unit is switched on by using the power switch. (2)
Turn the volume control (11) clockwise to increase the master volume and anti-clockwise to reduce
the master volume.
User guide WP S 210 F1 page 3
To access to the parameter menu press the edit button
(10) more than 4 seconds. The following
message appears on the display:
VOL RADIOMIC1 set the volume of the first wireless microphone
By pressing the button again you will get to the next menu.
VOL RADIOMIC2 set the volume of the second wireless microphone
VOL MIC set the volume of the microphone at input Mic.
VOL MP3 set the volume of the MP3 player
VOL AUX set the volume at input AUX IN
TONI TRE (ALTI) Setting the treble
TONI MID (MEDI) Setting the mids
TONI BAS (BASSI) Setting the bass
ANTILARSEN enable or disable ANTILARSEN
CONTRASTO controls the display contrast
Push the button Stop when you want to leave the function EDIT
To save the changes press the buttons Play and Edit at the same time more than 3 seconds. In the
display appears SAVE
For the music reproduction with a MP3 player use the USB port.
Push the button PLAY to play back music.
When you push the button NEXT playback skips to the next track.
When you push PLAY/PAUSA playback will stop.
With the button STOP you can cancelt he track.
IMPORTANT INFORMATION
Only use the charger CRB – 509
Don‘ t move the microphone too close to the loudspeakers to avoid feedback.
We wish you much success with our WP S 210.
AVE team
Consulting
•
Planning
•
Developing
•
Assembly of electroacoustic sound systems
AVE GmbH
•
Gustav-Rau-Straße 6
•
74321 Bietigheim-Bissingen
•
Germany
Phone +49 (0)7142 78879-0
•
Fax +49 (0)7142 78879-18
info@ave-stuttgart.de
•
www.ave-stuttgart.de
/