Martec TLRD3459WD Operating instructions

Type
Operating instructions
We strongly recommend that you read this manual carefully before installation.
Installation Instructions
Disconnect mains supply before
installation or removing cover.
(See Fg.1)
Insert plug into socket. (See Fg.3)
Toggle the button to select the colour
temperature required. Push the spring
up and place LED downlight in the
ceiling. (See Fg.4)
Fg.1 Fg.2 Fg.3
Fg.4 Fg.5
E: [email protected] | P: 02 8778 7500
www.martecaustralia.com.au
REX I nstallation Guid e
Models Parameters
TLRD3459WD 9W Tricolour LED Downlight Matt White
TLRD3459MD 9W Tricolour LED Downlight Matt Black
Application
• Residential
• Apartment
Dimensions
Aust/NZ Approval No.
xxx xxxx
Cut a Ø90mm hole in the ceiling.
(See Fg.2)
Release the spring and make sure the
(See Fg.5)
Insulation
Thermal insulation clearance class IC-4 covered; meaning that the LED downlight can be covered entirely by insulation abutting or is within
i) be a type that can maintain its dimensions and structural integrity when exposed to a maximum surface temperature
IMPORTANT NOTE
such as macerated paper and wool.
Minimum side clearance is 25mm. Minimum height clearance is 20mm.
Ø100mm
85mm
Caution,risk of electric shock
Ø90mm
WW: 3000K
CW: 4000K
DL: 6000K
  • Page 1 1

Martec TLRD3459WD Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI