Lenovo A1-NP User manual

Type
User manual

The Lenovo A1-NP smart lock offers a range of features for securing and managing access to your home. With fingerprint, PIN code, and RFID card unlocking options, you can choose the most convenient way to enter. Dual authentication mode adds an extra layer of security by requiring two different methods to unlock. The lock also features volume settings, Wi-Fi connectivity, and a low battery indicator. In case of emergencies, you can use the emergency keys or USB input to unlock the door.

The Lenovo A1-NP smart lock offers a range of features for securing and managing access to your home. With fingerprint, PIN code, and RFID card unlocking options, you can choose the most convenient way to enter. Dual authentication mode adds an extra layer of security by requiring two different methods to unlock. The lock also features volume settings, Wi-Fi connectivity, and a low battery indicator. In case of emergencies, you can use the emergency keys or USB input to unlock the door.

USER MANUAL
1 : ADMINISTRATOR MENU
In the initialization state, it is the experience mode. Enter any password and fingerprint to unlock
it, enter the management mode and configure the administrator password, and the experience
mode ends.
1. Add User
2. Delete User
3. System Settings
Add Fingerprint, Pincode
or RFID, follow by [#] sign
Press 1 to Delete All
1. Activate WiFi
2. Deactivate WiFi
1. Time Settings
2. Time Information
1. Smart WiFI
2. Hotspot WiFi
1. Activate Dual
Authentication
2. Deactivate Dual
Authentication
Press 2 to delete
individual Pincode /
Fingerprint / RFID.
Press [*] to return
1. High Volume
2. Medium Volume
3. Low Volume
4. Mute
1. Delete All
2. Delete Individual
(Fingerprint / Pincode /
RFID)
1. Volume Settings
2. WiFi Settings
3. Dual Authentication
4. System Settings
21 3
2
1
4
1
1
2
3
2 : ENTER TO ADMINISTRATOR MODE
3 : ADDING USER
3.1 : ADDING OF FINGERPRINT
Touch the front pad area, the touchpad light is on, press [*] twice in a
row to enter the administrator management mode.
The first time you enter, you need to configure an administrator first,
and you can add it according to the voice prompts. Once administrator
has been added, you can enter by verifying the administrator's finger-
print or administrator’s password.
1. Press [*] twice and key in administrator Pincode / Fingerprint.
2. Press 1 to enter “Adding of user” mode
3. Follow voice prompt, use the same fingerprint 6X over the sensor area to capture different angles
of fingerprint till it is successful
3.2 : ADDING OF PINCODE
1. Press [*] twice + admin pincode to enter administrator mode, and press [1] to add user.
2. Enter the 6-digit password according to the voice prompt, press [#] to end.
3. You will be required to enter the 6-digit password again. "Enter the same password again, press
[#] to confirm, and hear the voice prompt "Added successfully".
3.3 : ADDING OF RFID TAG
1. Press [*] twice + admin pincode to enter administrator mode, and press [1] to add user.
2. Place your RFID tag near the card sign on front panel, press [#] to confirm, and hear the voice
prompt "Added successfully".
3.5 : ERASE SPECIFIC FINGERPRINT / PINCODE / RFID TAG
1. Press [*] twice + admin pincode to enter administrator mode, and press [2] and [2] to delete
specific pincode / RFID tag / fingerprint.
2. Enter OR place “to be delete” Fingerprint / Pincode / RFID Tag
3.4 : ERASE ALL WARNING: ALL WILL BE DELETED
1. Press [*] twice + admin pincode to enter administrator mode, and press [2] and [1] to delete ALL.
2. After all deleted, all previously created Fingerprints, Pincode and RFID Tags will be deleted, please
operate with caution.
Press [1] Volume setting, press [2] Network setting, press [3] Dual authentication setting
Press [4] to check the door lock information, and press [*] to exit.
4 : SYSTEM SETTING
4.1 : VOLUME SETTING MODE
Press [1] High level volume, [2] Medium level volume, [3] Low level volume, [4] Mute, and press [*]
to exit.
4.2 : NETWORK SETTING
Press [1] Activate WIFI or [2] Deactivate WIFI.
After activation of WIFI, press [1] Smart WIFI or [2] Hotspot WIFI
4.3 : DUAL AUTHENTICATION SETTINGS
Press [1] Activate or [2] Deactivate
4.4 : LOCK INFORMATION SETTINGS
Press [1] to set date and time OR [2] enquire date and time.
5.1.1 : PINCODE UNLOCK
Enter pincode and [#] to confirm.
5 : HOW TO USE
5.1.2 : FINGERPRINT UNLOCK
Place the registered fingerprint on the sensor.
Once verification is successful, the door will be unlocked.
5.1.3 : RFID TAG UNLOCK
Place the registered RFID Tag on the front card reader.
5.2 : DUAL AUTHENTICATION MODE
5.1 : NORMAL MODE
In dual verification mode, it needs to be verified twice successfully to unlock.
For example: pincode + fingerprint, pincode + RFID card, fingerprint + RFID card.Once verification
is successful, the door will be unlocked.
5.3 : EMERGENCY ENTRY
In case of forgotten pincode, battery flat, or unable to unlock the door, Emergency keys or
Emergency USB input can be used to unlock the door.
5.3.1 : EMERGENCY KEYS
Emergency key can be inserted behind the magnetic hidden cover
for emergency unlocking.
5.3.2 : EMERGENCY BOOT UP VIA POWER BANK
During flat battery mode, insert USB behind the magnetic hidden
cover for emergency boot up. After that use pincode and [#] to
unlock the door
5.4 : EASY SWIPE
Swipe your finger from the lock icon to the unlock icon on the indoor
panel to unlock indoors, and pull / push to open door.
5.5: AUTOMATICALLY LOCKING DOOR
After the door closing sensing tongue is pressed, the main tongue
will be automatically released, and the door will be locked
automatically.
5.6 : LOCK DOWN MODE
If you input wrong password, fingerprint and door card 5 times in a row within 5 minutes, the system
will be locked for 90s, but cannot be unlocked within 90s, and the voice prompt "system is locked".
5.7 : LOW BATTERY MODE
When the battery power is lower than 3.6V ± 0.1V, a voice prompt "battery power is low, please charge
in time" will be displayed every time you unlock, and the low power icon on the panel will light up.
6 : PRODUCT INTRODUCTION
LITHIUM BATTERY
NUMBER PAD
RFID
FINGERPRINT
EMERGENCY KEY
EMERGENCY USB
MANUAL UNLOCK
SENSOR SWIPE
7 : FACTORY RESET GUIDE
PRESS & HOLD TO FACTORY RESET
www.lenovosmartlock.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

Lenovo A1-NP User manual

Type
User manual

The Lenovo A1-NP smart lock offers a range of features for securing and managing access to your home. With fingerprint, PIN code, and RFID card unlocking options, you can choose the most convenient way to enter. Dual authentication mode adds an extra layer of security by requiring two different methods to unlock. The lock also features volume settings, Wi-Fi connectivity, and a low battery indicator. In case of emergencies, you can use the emergency keys or USB input to unlock the door.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI