CTA ASKB10 Owner's manual

CTA
Brand
CTA
Model
ASKB10
Type
Owner's manual
support@ctadigital.com
INSTRUCTION MANUAL
PAD-ASK13B
Package Contents
Case connector
Base connector
Key
Lock
1
Insert tube into case
connector and tighten
screws on both sides
Tube
Base
2
Insert tube into base connector and
tighten all 4 screws
Stylus
support@ctadigital.com
1) Place the stand on a flat surface.
2) Adjust the enclosure to the horizontal position, then insert the key and turn clockwise
to release the lock. Remove enclosure faceplate.
3) Place iPad Pro into the enclosure tray, and then place faceplate on top.
4) Close the enclosure and press the lock button.
iPad
Press in to lock
1
2
Slide protectors
over the cable.
Align protectors
so opening is
perpendicular to
slot openings on
tube.
Pull cable through
tube.
Key slot
Key slot
Using anti-theft cable:
1. Attach cable to slot at base of stand
or on back of case.
2. Attach opposite end to any
permanent fixture using loop.
Faceplate
Enclosure
tray
Case
Base
Optional accessories
Stick adhesive pads to bottom of stand base
for scratch protetion and temporary mounting.
Unlo cked
  • Page 1 1
  • Page 2 2

CTA ASKB10 Owner's manual

CTA
Brand
CTA
Model
ASKB10
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents