2. AGI
  3. 3104 Drive Belt Field Fix

AGI 3104 Drive Belt Field Fix Operating instructions

  • Hello, I'm your chat assistant. I've reviewed the Field Fix Instructions for Westfield & Wheatheart drive belt replacement on STX2 and XTA Series Augers and I am ready to assist you with any questions about the instructions, the tools you'll need, or any steps related to the process.
  • What tools are required for the belt replacement?
    What auger models are covered by these instructions?
    What is the first step to replace the belt?
Westfield | Wheatheart
part of the Ag Growth International group
P.O. Box 39, Rosenort, Manitoba, Canada R0G 1W0 Ph: (866) 467-7207 Fax: (866) 768-4852
Website: www.grainaugers.com | www.wheatheart.com Email: sales@grainaugers.com | sales@wheatheart.com
© Ag Growth International Inc. 2018
FIELD FIX INSTRUCTIONS
ECN ID#
3104
DATE
August
2
2
, 2018
BRAND
Westfield & Wheatheart
PRODUCT
Drive Belt
MODEL
STX2 & XTA Series Augers
(Excluding 100
-
51
Augers
)
DATE RANGE
November 29,
2017 to August 21, 2018
SERIAL #
STX2: 263940 to 288992 & 1801031027 to 1806197362
XTA: 18383 to 20202 & 1801081173 to 1807174855
DETAILS
These instructions are to be used when
r
eplacing
the
drive belt
s.
Auger Model
Part No.
Description
80
-
31 & 100
-
31
10
-
23196
DOUBLE BANDED BELT, B
210
80
-
36 & 100
-
36
10
-
23197
DOUBLE BANDED
BELT, B
240
80
-
41 & 100
-
41
10
-
23198
DOUBLE BANDED BELT, B
270
80
-
46
10
-
23199
DOUBLE BANDED BELT, B
300
80
-
51
10
-
23200
DOUBLE BANDED BELT, B
330
TOOLS REQUIRED:
Socket with racket (9/16”, 1-1/8”) or Impact
Wrench (9/16”)
2 | P a g e
REPLACE BELT:
Step
1
:
Remove the backplate cover
assembly.
Step
2
:
Remove the front belt guard cover
assembly.
Step
3
:
Remove the belt tensioner cover
assembly.
Step
4
:
Loosen belt and r
emove the belt
tension plate.
FRONT BELT GUARD COVER ASSEMBLY
BACKPLATE COVER ASSEMBLY
BELT TENSIONER
COVER ASSEMBLY
BELT TENSION PLATE
P a g e | 3
Step
5
:
Remove the existing belt.
Step 6: Install the new belt.
Step
7
:
Re
-
install belt tension plate and idler
spacer bushing using the two
existing 3/4” locknuts.
Note: Refer to the auger operator manual
for drive belt alignment and tension
instructions.
Step
8
:
Re
-
install belt tensioner cover
assembly using the three existing
3/8” x 3/4” bolts and lock washers.
Step
9
:
Re
-
install front belt guard cover
assembly using the six existing 3/8”
x 3/4” bolts and lock washers.
FRONT BELT GUARD
COVER ASSEMBLY
BOLT, 3/8” X 3/4”
LOCK WASHER,
3/8”
BELT TENSIONER
COVER ASSEMBLY
BOLT, 3/8” X 3/4”
LOCK WASHER, 3/8”
ENGINE PULLEY
GEARBOX PULLEY
BELT
FLAT IDLER PULLEYS
BELT TENSION
PLATE
IDLER SPACER
BUSHING
LOCKNUT, 3/4”
4 | P a g e
Step
10
:
Re
-
install backplate cover assembly
using the three existing 3/8” x 5”
bolts and whiznuts.
BACKPLATE COVER ASSEMBLY
BOLT, 3/8” X 5”
WHIZNUT, 3/8”
/