2. Thermo Fisher Scientific
  3. Procise® Cartridge Sensor Error Troubleshooting Tree

Thermo Fisher Scientific Procise® Cartridge Sensor Error Troubleshooting Tree User guide

  • I have reviewed the Procise Cartridge Sensor Error Troubleshooting Tree manual. This document outlines procedures for diagnosing and resolving issues with the fluid sensors, including the cartridge and flask sensors. The manual features a detailed troubleshooting tree, that helps you navigate the process of resolving sensor errors. I'm ready to assist you with any questions.
  • What should I do if I get a Fluid Sensor Error?
    What should I do if the bottle fluid level is low or empty?
    What is the course of action if a leak test fails?
Procise® Cartridge Sensor Error Troubleshooting Tree
Fluid Sensor
Errors Cartridge or
Flask sensor?
Check Method, Cycle and
Step No. in Event Log
Cartridge
Sensor (outlet
or loop load)
Cartridge
Outlet
X1/R1/R3/S2/S3
(Loop Load)
Transfer to
Flask sensor
Manually transfer
to Flask with S2 or
S3 (with flask
function 228)
No Transfer to
flask
Clear valve 38
or tubing into
flask with
insulin syringe
Check bottle
fluid level;
manually deliver
S2 or S3 through
cartridge to
waste
Deliveries
successful
Deliveries
unsuccessful
Clear outlet
tubing with
insulin syringe,
or replace tubing
Shift position of
cartridge outlet
sensor
Check / adjust
bottle pressure
regulator
Check bottle
fluid level
Level low or
empty; replace
bottle
Fluid level
OK
Run bottle leak
test Test fails
Test passes
Manually deliver
reagent through
cartridge to
waste
No delivery; clear
delivery line with
insulin syringe &
methanol
No delivery;
check / adjust
bottle regulator
pressure
Replace bottle
seal, run leak test
again
Test fails again
(1) Replace
ratchet
receptacle
(2) Replace
checkvalve
Leak Test still
fails on R3 bottle
Check for corrosion
on brass barb of
Pressure
Management board
Check / replace
Venting Angar
Valve (No. 53)
119GU01-01
/