MSI H67MA-E35-B3 User manual



H67MA-E35 (B3)/

H67MS-E23 (B3) seres

MS-7680 (v2.x) Manboard

G52-76801XW



Preface

Copyrght Notce

The materal n ths document s the ntellectual property of MICRO-STAR INTERNA-

TIONAL. We take every care n the preparaton of ths document, but no guarantee s

gven as to the correctness of ts contents. Our products are under contnual mprove-

ment and we reserve the rght to make changes wthout notce.

Trademarks

All trademarks are the propertes of ther respectve owners.

MSI

®

s regstered trademark of Mcro-Star Int’l Co.,Ltd.

NVIDIA

®

s regstered trademark of NVIDIA Corporaton.

ATI

®

s regstered trademark of ATI Technologes, Inc.

AMD

®

s regstered trademarks of AMD Corporaton.

Intel

®

s regstered trademarks of Intel Corporaton.

Wndows

®

s regstered trademarks of Mcrosoft Corporaton.

AMI

®

s regstered trademark of Amercan Megatrends Inc.

Award

®

s a regstered trademark of Phoenx Technologes Ltd.

Sound Blaster

®

s regstered trademark of Creatve Technology Ltd.

Realtek

®

s regstered trademark of Realtek Semconductor Corporaton.

JMcron

®

s regstered trademark of JMcron Technology Corporaton.

Netware

®

s a regstered trademark of Novell, Inc.

Lucd

®

s trademarks of LucdLogx Technologes, Ltd.

Revson Hstory

Revson Revson Hstory Date

V2.4 For PCB v2.X, Asa verson March 2011

Techncal Support

If a problem arses wth your system and no soluton can be obtaned from the user’s

manual, please contact your place of purchase or local dstrbutor. Alternatvely, please

try the followng help resources for further gudance.

Vst the MSI webste for techncal gude, BIOS updates, drver updates, and

other nformaton:

http://www.ms.com/servce/download

Contact our techncal sta at:

http://support.ms.com

￭

◙



MS-7680

Preface

Safety Instructons

Always read the safety nstructons carefully.

Keep ths User’s Manual for future reference.

Keep ths equpment away from humdty.

Lay ths equpment on a relable at surface before settng t up.

The openngs on the enclosure are for ar convecton hence protects the equpment

from overheatng. DO NOT COVER THE OPENINGS.

Make sure the voltage of the power source s at 110/220V before connectng the

equpment to the power nlet.

Place the power cord such a way that people can not step on t. Do not place any

-

thng over the power cord.

Always Unplug the Power Cord before nsertng any add-on card or module.

All cautons and warnngs on the equpment should be noted.

Never pour any lqud nto the openng that can cause damage or cause electrcal

shock.

If any of the followng stuatons arses, get the equpment checked by servce

personnel:

The power cord or plug s damaged.

Lqud has penetrated nto the equpment.

The equpment has been exposed to mosture.

The equpment does not work well or you can not get t work accordng to User’s

Manual.

The equpment has been dropped and damaged.

The equpment has obvous sgn of breakage.

DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT ABOVE 60

o

C (140

o

F),

IT MAY DAMAGE THE EQUIPMENT..

CAUTION: There s a rsk of exploson, f battery s ncorrectly replaced.

Replace only wth the same or equvalent type recommended by the manufacturer.

警告使用者:

這是甲類資訊產品，在居住的環境中使用時，可能會造成無線電干擾，在這種情況下，

使用者會被要求採取某些適當的對策。

廢電池請回收

For better envronmental protecton, waste batteres should be

collected separately for recyclng or specal dsposal.

￭

◯

v

Preface

FCC-B Rado Frequency Interference Statement

Ths equpment has been tested and found

to comply wth the lmts for a Class B dg-

tal devce, pursuant to Part 15 of the FCC

Rules. These lmts are desgned to provde

reasonable protecton aganst harmful nter-

ference n a resdental nstallaton. Ths equpment generates, uses and can radate

rado frequency energy and, f not nstalled and used n accordance wth the nstruc-

tons, may cause harmful nterference to rado communcatons. However, there s no

guarantee that nterference wll not occur n a partcular nstallaton. If ths equpment

does cause harmful nterference to rado or televson recepton, whch can be deter-

mned by turnng the equpment o and on, the user s encouraged to try to correct the

nterference by one or more of the measures lsted below.

Reorent or relocate the recevng antenna.

Increase the separaton between the equpment and recever.

Connect the equpment nto an outlet on a crcut derent from that to whch the

recever s connected.

Consult the dealer or an experenced rado/televson techncan for help.

Notce 1

The changes or modcatons not expressly approved by the party responsble for com

-

plance could vod the user’s authorty to operate the equpment.

Notce 2

Shelded nterface cables and A.C. power cord, f any, must be used n order to comply

wth the emsson lmts.

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.

◯

Ths devce comples wth Part 15 of the FCC Rules. Operaton s subject to the follow

-

ng two condtons:

ths devce may not cause harmful nterference, and

ths devce must accept any nterference receved, ncludng nterference that may

cause undesred operaton.

1)

2)

Mcro-Star Internatonal

MS-7680

v

MS-7680

Preface

WEEE (Waste Electrcal and Electronc Equpment) Statement

ENGLISH

To protect the global envronment and as an envronmentalst, MSI must re-

mnd you that...

Under the European Unon (“EU”) Drectve on Waste Electrcal and Elec

-

tronc Equpment, Drectve 2002/96/EC, whch takes eect on August 13,

2005, products of “electrcal and electronc equpment” cannot be dscarded as mu

-

ncpal wastes anymore, and manufacturers of covered electronc equpment wll be

oblgated to take back such products at the end of ther useful lfe. MSI wll comply wth

the product take back requrements at the end of lfe of MSI-branded products that are

sold nto the EU. You can return these products to local collecton ponts.

DEUTSCH

Hnwes von MSI zur Erhaltung und Schutz unserer Umwelt

Gemäß der Rchtlne 2002/96/EG über Elektro- und Elektronk-Altgeräte dürfen Elek

-

tro- und Elektronk-Altgeräte ncht mehr als kommunale Abfälle entsorgt werden. MSI

hat europawet verschedene Sammel- und Recyclngunternehmen beauftragt, de n

de Europäsche Unon n Verkehr gebrachten Produkte, am Ende senes Lebenszyklus

zurückzunehmen. Btte entsorgen Se deses Produkt zum gegebenen Zetpunkt aus-

schlesslch an ener lokalen Altgerätesammelstelle n Ihrer Nähe.

FRANÇAIS

En tant qu’écologste et an de protéger l’envronnement, MSI tent à rappeler cec...

Au sujet de la drectve européenne (EU) relatve aux déchets des équpement élec

-

trques et électronques, drectve 2002/96/EC, prenant eet le 13 août 2005, que les

produts électrques et électronques ne peuvent être déposés dans les décharges ou

tout smplement ms à la poubelle. Les fabrcants de ces équpements seront oblgés de

récupérer certans produts en n de ve. MSI prendra en compte cette exgence relatve

au retour des produts en n de ve au sen de la communauté européenne. Par con-

séquent vous pouvez retourner localement ces matérels dans les ponts de collecte.

РУССКИЙ

Компания MSI предпринимает активные действия по защите окружающей среды,

поэтому напоминаем вам, что....

В соответствии с директивой Европейского Союза (ЕС) по предотвращению

загрязнения окружающей среды использованным электрическим и электронным

оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13

августа 2005 года, изделия, относящиеся к электрическому и электронному

оборудованию, не могут рассматриваться как бытовой мусор, поэтому

производители вышеперечисленного электронного оборудования обязаны

принимать его для переработки по окончании срока службы. MSI обязуется

соблюдать требования по приему продукции, проданной под маркой MSI на

территории EC, в переработку по окончании срока службы. Вы можете вернуть

эти изделия в специализированные пункты приема.

Page is loading ...

En-2

MS-7680 Manboard

Manboard Speccatons

Processor Support

Intel

®

Core

™

7/ Core

™

5/ Core

™

3/ Pentum

®

/ Celeron

®

processor n the LGA1155

package

(For the latest nformaton about CPU, please vst

http://www.ms.com/servce/cpu-support)

Chpset

Intel

®

H67 (B3) chpset

Memory Support

2 DDR3 DIMMs support DDR3 1333/ 1066 DRAM (16GB Max)

Supports Dual-Channel mode

(For more nformaton on compatble components, please vst

http://www.ms.com/servce/test-report)

LAN

Supports LAN 10/100/1000 by Realtek

®

RTL8111E

Audo

HD audo codec ntegrated by Realtek

®

ALC887

Flexble 8-channel audo wth jack sensng

SATA

2 SATA 6Gb/s ports (SATA1~2) by Intel

®

H67 PCH

4 SATA 3Gb/s ports (SATA3~6) by Intel

®

H67 PCH

RAID

SATA1~6 support Intel

®

Matrx Storage Technology (AHCI/ RAID 0/ 1/ 5/ 10) by Intel

®

H67 PCH

USB 3.0 (H67MA-E35 (B3))

2 USB 3.0 rear IO ports by NEC

®

D720200

■

En-3

Englsh

* If you need to purchase accessores and request the part numbers, you could search

the product web page and nd detals on our web address http://www.ms.com/ndex.

php

Connectors

Back panel

1 PS/2 keyboard/ mouse combo port

2 USB 3.0 ports (H67MA-E35 (B3))

4 USB 2.0 ports

1 HDMI port* (H67MA-E35 (B3))

1 VGA port*

1 DVI-D port*

1 LAN port

6 exble audo ports (H67MA-E35 (B3)) / 3 exble audo ports (H67MS-E23

(B3))

*(The HDMI, DVI-D and VGA ports only work wth Integrated Graphcs Processor)

On-Board

3 USB 2.0 connectors

1 Chasss Intruson connector

1 S/PDIF-Out connector

1 Front Panel Audo connector

1 TPM Module connector

1 Parallel port connector

1 Seral port connector

Slots

1 PCIE x16 slot

2 PCIE x1 slots

1 PCI slot

Form Factor

Mcro-ATX (24.5 cm X 21.5 cm)

Mountng

6 mountng holes

■

-

■

-

■

Page is loading ...

En-5

Englsh

Screw Holes

When you nstall the manboard, you have to place the manboard nto the chasss n the

correct drecton. The locatons of screws holes on the manboard are shown as below.

Refer above pcture to nstall standos n the approprate locatons on chasss and then

screw through the manboard screw holes nto the standos.

Important

To prevent damage to the manboard, any contact between the manboard crcut and

chasss or unnecessary standos mounted on the chasss s prohbted.

Please make sure there are no metal components placed on the manboard or wthn

the chasss that may cause short crcut of the manboard.

•

Screw holes

The sde has to

toward the rear,

the poston for

the I/O sheld of

the chasss.

En-6

MS-7680 Manboard

CPU (Central Processng Unt)

When you are nstallng the CPU, make sure to nstall the cooler to prevent overheatng.

If you do not have the CPU cooler, consult your dealer before turnng on the computer.

For the latest nformaton about CPU, please vst

http://www.ms.com/servce/cpu-support

Important

Overheatng

Overheatng wll serously damage the CPU and system. Always make sure the coolng

fan can work properly to protect the CPU from overheatng. Make sure that you apply

an even layer of thermal paste (or thermal tape) between the CPU and the heatsnk to

enhance heat dsspaton.

Replacng the CPU

Whle replacng the CPU, always turn o the ATX power supply or unplug the power

supply’s power cord from the grounded outlet rst to ensure the safety of CPU.

Overclockng

Ths manboard s desgned to support overclockng. However, please make sure your

components are able to tolerate such abnormal settng, whle dong overclockng. Any

attempt to operate beyond product speccatons s not recommended. We do not guar

-

antee the damages or rsks caused by nadequate operaton or beyond product spec

-

catons.

Introducton to LGA 1155 CPU

The surface of LGA 1155 CPU. Remember to apply some thermal paste on t for

better heat dsperson.

Algnment Key

Yellow trangle s the

Pn 1 ndcator

Algnment Key

En-7

Englsh

CPU & Cooler Installaton

When you are nstallng the CPU, make sure the CPU has a cooler attached on the top

to prevent overheatng. Meanwhle, do not forget to apply some thermal paste on CPU

before nstallng the heat snk/cooler fan for better heat dsperson.

Follow the steps below to nstall the CPU & cooler correctly. Wrong nstallaton wll

cause the damage of your CPU & manboard.

Open the load level.

1.

Lft the load lever up to fully open po

-

ston.

2.

The CPU socket has a plastc cap on

t to protect the contact from damage.

Before you nstall CPU, always cover

t to protect the socket pn. Remove

the cap (as the arrow shows).

3. After conrmng the CPU drecton for

correct matng, put down the CPU n

the socket housng frame. Be sure to

grasp on the edge of the CPU base.

Note that the algnment keys are

matched.

4.

Algnment Key

En-8

MS-7680 Manboard

Important

Conrm f your CPU cooler s rmly nstalled before turnng on your system.

Do not touch the CPU socket pns to avod damagng.

•

Algnment Key

Vsually nspect f the CPU s seated

well nto the socket. If not, take out

the CPU wth pure vertcal moton

and renstall.

5. Engage the load lever whle pressng

down lghtly onto the load plate.

6.

Secure the lever near the hook end

under the retenton tab.

7. Make sure the four hooks are n por-

per poston before you nstall the

cooler.

8.

En-9

Englsh

Manboard

Hook

Important

Read the CPU status n BIOS.

Whenever CPU s not nstalled, always protect your CPU socket pn wth the plastc

cap covered (shown n Fgure 1) to avod damagng.

Manboard photos shown n ths secton are for demonstraton of the CPU/ cooler n

-

stallaton only. The appearance of your manboard may vary dependng on the model

you purchase.

Please refer to the documentaton n the CPU fan package for more detals about the

CPU fan nstallaton.

•

Algn the holes on the manboard wth

the heatsnk. Push down the cooler

untl ts four clps get wedged nto the

holes of the manboard.

9. Press the four hooks down to fasten

the cooler.

10.

Turn over the manboard to conrm

that the clp-ends are correctly n

-

serted.

11. Fnally, attach the CPU Fan cable to

the CPU fan connector on the man-

board.

12.

En-10

MS-7680 Manboard

Memory

These DIMM slots are used for nstallng memory modules. For more nformaton on

compatble components, please vst

http://www.ms.com/servce/test-report

DDR3

240-pn, 1.5V

48x2=96 pn

72x2=144 pn

Dual-Channel mode Populaton Rule

In Dual-Channel mode, the memory modules can transmt and receve data wth two

data bus lnes smultaneously. Enablng Dual-Channel mode can enhance the system

performance. The followng llustratons explan the populaton rules for Dual-Channel

mode.

DIMM1

DIMM2

Important

DDR3 memory modules are not nterchangeable wth DDR2, and the DDR3 standard

s not backwards compatble. You should always nstall DDR3 memory modules n

the DDR3 DIMM slots.

In Dual-Channel mode, make sure that you nstall memory modules of the

same type

and densty n derent channel DIMM slots.

Due to the chpset resource deployment, the system densty wll only be detected up

to 15+GB (not full 16GB) when each DIMM s nstalled wth a 8GB memory module.

•

Installed

Empty

En-11

Englsh

Installng Memory Modules

The memory module has only one notch on the center and wll only t n the rght

orentaton.

Insert the memory module vertcally nto the DIMM slot. Then push t n untl the

golden nger on the memory module s deeply nserted n the DIMM slot. The plastc

clp at each sde of the DIMM slot wll automatcally close when the memory module

s properly seated.

Manually check f the memory module has been locked n place by the DIMM slot

clps at the sdes.

Notch

Volt

Important

You can barely see the golden nger f the memory module s properly nserted n the

DIMM slot.

1.

2.

3.

En-12

MS-7680 Manboard

Power Supply

ATX 24-pn Power Connector: JPWR1

Ths connector allows you to connect an ATX 24-pn power supply. To connect the ATX

24-pn power supply, make sure the plug of the power supply s nserted n the proper

orentaton and the pns are algned. Then push down the power supply rmly nto the

connector.

You may use the 20-pn ATX power supply as you lke. If you’d lke to use the 20-pn

ATX power supply, please plug your power supply along wth pn 1 & pn 13.

13.+3.3

V

1.+3.3

V

14.-12V

2.+3.3

V

15.Ground

3

.Ground

16.PS-ON

#

4.+5

V

17.Ground

5

.Ground

18.Ground

6.+5

V

19.Ground

7

.Ground

22.+5

V

10.+12V

20.Res

8.PW

R O

K

23.+5

V

11

.+12V

21.+5

V

9.5VSB

24.Ground

12.+3.3

V

ATX 4-pn Power Connector: JPWR2

Ths connector s used to provde the power output to the CPU.

4.+12V

2

.Ground

3.+12V

1

.Ground

Important

Make sure that all the connectors are connected to proper ATX power supples to en-

sure stable operaton of the manboard.

En-13

Englsh

Back Panel

Mouse/Keyboard

The standard PS/2

®

mouse/keyboard DIN connector s for a PS/2

®

mouse/keyboard.

USB 2.0 Port

The USB 2.0 port s for attachng USB devces such as keyboard, mouse, or other USB-

compatble devces.

USB 3.0 Port (optonal)

USB 3.0 port s backward-compatble wth USB 2.0 devces. Supports data transfer rate

up to 5 Gbt/s (SuperSpeed).

Important

If you want to use a USB 3.0 devce, you must use the USB 3.0 cable to connect to the

USB 3.0 port.

HDMI Port (optonal)

The Hgh-Denton Multmeda Interface (HDMI) s an all-dgtal audo/vdeo nterface

capable of transmttng uncompressed streams. HDMI supports all TV format, nclud

-

ng standard, enhanced, or hgh-denton vdeo, plus mult-channel dgtal audo on a

sngle cable.

VGA Port

The DB15-pn female connector s provded for montor.

DVI-D Port

The DVI-D (Dgtal Vsual Interface - Dgtal) connector allows you to connect a LCD

montor. It provdes a hgh-speed dgtal nterconnecton between the computer and ts

dsplay devce. To connect an LCD montor, smply plug your montor cable nto the DVI

-D connector, and make sure that the other end of the cable s properly connected to

your montor (refer to your montor manual for more nformaton.)

Important

The HDMI, VGA and DVI-D dsplay nterfaces on the manboard are desgned to serve

as IGP (Integrated Graphcs Processor) used. If you nstalled a processor wthout

ntegrated graphcs chp, these dsplay ports wll have no eect.

▶

LAN

HDMI Port

Lne-In

Lne-Out

Mc

VGA Port

USB 3.0 Port

DVI-D Port

RS-Out

CS-Out

SS-Out

Mouse/ Keyboard

USB 2.0 PortUSB 2.0 Port

(optonal)

En-14

MS-7680 Manboard

LAN

The standard RJ-45 LAN jack s for connecton to

the Local Area Network (LAN). You can connect a

network cable to t.

LED Color LED State Condton

Left Yellow O LAN lnk s not establshed.

On(Steady state) LAN lnk s establshed.

On(brghter & pulsng) The computer s communcatng wth another computer on the LAN.

Rght

Green O 10 Mbt/sec data rate s selected.

On 100 Mbt/sec data rate s selected.

Orange On 1000 Mbt/sec data rate s selected.

Audo Ports

These audo connectors are used for audo devces. It s easy to derentate between

audo eects accordng to the color of audo jacks.

Lne-In: Blue - Lne In, s used for external CD player, tape-player or other audo

devces.

Lne-Out: Green - Lne Out, s a connector for speakers or headphones.

Mc: Pnk - Mc, s a connector for mcrophones.

RS-Out (optonal): Black - Rear-Surround Out n 4/ 5.1/ 7.1 channel mode.

CS-Out (optonal): Orange - Center/ Subwoofer Out n 5.1/ 7.1 channel mode.

SS-Out (optonal): Gray - Sde-Surround Out 7.1 channel mode.

Important

If the manboard, whch equps 3 audo jacks, wants to reach the 8-channel sound ef-

fect, the 7th and 8th channels must be output from front panel.

▶

■

Yellow Green/ Orange

En-15

Englsh

Connectors

Seral ATA Connector: SATA1~6

Ths connector s a hgh-speed Seral ATA nterface port. Each connector can connect

to one Seral ATA devce.

* The MB layout n ths gure s for reference only.

SATA1~2 (6Gb/s)

SATA3~6 (3Gb/s)

SATA3_4

SATA1_2

SATA5

SATA6

Important

Please do not fold the Seral ATA cable nto a 90-degree angle. Otherwse, data loss

may occur durng transmsson.

En-16

MS-7680 Manboard

Fan Power Connectors: CPUFAN,SYSFAN1~2

The fan power connectors support system coolng fan wth +12V. When connectng the

wre to the connectors, always note that the red wre s the postve and should be con-

nected to the +12V; the black wre s Ground and should be connected to GND. If the

manboard has a System Hardware Montor chpset on-board, you must use a specally

desgned fan wth speed sensor to take advantage of the CPU fan control.

1

.Ground

2.+12V

3.Sensor

/ N

o U

se

1

.

G

r

o

u

n

d

2

.

+

1

2

V

3

.

S

e

n

s

o

r

4

.

C

o

n

t

r

o

l

CPUFAN SYSFAN1~2

Important

Please refer to the recommended CPU fans at processor’s ocal webste or consult

the vendors for proper CPU coolng fan.

CPUFAN support Smart fan control. You can nstall

Control Center utlty that wll

automatcally control the CPUFAN speeds accordng to the actual CPUFAN tem-

peratures.

Fan cooler set wth 3 or 4 pns power connector are both avalable for CPUFAN.

Front Panel Connectors: JFP1, JFP2

These connectors are for electrcal connecton to the front panel swtches and LEDs.

The JFP1 s complant wth Intel

®

Front Panel I/O Connectvty Desgn Gude.

1

.Ground

3.Suspend

LE

D

5.Power

LE

D

7.No Pi

n

8.

+

6.

-

4.

+

2.

-

Buzzer

S

peaker

1.+

3.

-

10.No

Pi

n

5.

-

Reset

S

witch

HDD

LE

D

P

ower

S

witch

P

ower

LE

D

7.

+

9.Reserve

d

8.

-

6.

+

4.

-

2.

+

JFP1

JFP2

•

En-17

Englsh

Front USB Connector: JUSB1~3

Ths connector, complant wth Intel

®

I/O Connectvty Desgn Gude, s deal for con-

nectng hgh-speed USB nterface perpherals such as USB HDD, dgtal cameras, MP3

players, prnters, modems and the lke.

11

5V

1.VC

C

3.USB 0

-

10.NC

5.USB 0

+

7

.Grou n d

9.No

8

.Grou n d

6.USB 1

+

4.USB 1

-

2.VC

C

* The MB layout n ths gure s for reference only.

USB Bracket (optonal)

Important

Note that the pns of VCC and GND must be connected correctly to avod possble

damage.

Front Panel Audo Connector: JAUD1

Ths connector allows you to connect the front panel audo and s complant wth Intel

®

Front Panel I/O Connectvty Desgn Gude.

1.MI

C L

3.MI

C R

10.Head

P

hone

Detection

5.Head P

hone

R

7.SENSE_SEN

D

9.Head

P

hone

L

8.No

Pi

n

6.MI

C D

etection

4.NC

2

.Ground

Page is loading ...

MSI H67MA-E35-B3 User manual

MSI H67MA-E35-B3 User manual

in other languages

Related papers

Other documents