GATCO 1392SN Installation guide

The manufacturer reserves the right to, and do time to time, make changes and improvements in designs and dimensions.

Updated on January 6, 2016

Installation Instructions

Latitude² Two-Tier Glass Shelf #1392C, #1392SN

CARE AND MAINTENANCE:

To maintain the beautiful luster finish,

please use soft damp cloths when

cleaning and never use any cleaning solvents.

Hole at bottom

B C

Front View

1. A SSEM BLY

2. INSTALLATION

5/16”

bit

Drill 5/16 in. pilot holes.

Tap molly bolts into the pilot holes

using a hammer. Use an electrical

screwdriver to tighten the screws.

Unscrew the screws from the

molly bolts.

Insert the screws back through

the bracket and the molly bolts,

then tighten firmly.

Tools Required

(Not included)

CAUTION: Molly bolts are for dry walls only.

Use tile anchors for tile surfaces. (Not included)

This step may require two people

This manual is also suitable for