Ivy Terrace IVS108-1-SA Installation guide

Type
Installation guide

This manual is also suitable for

Model: IVTD110
Features
No assembly required1.
11/19/2012
ASSEMBLY INSTRUCTIONS
11/19/2012
ASSEMBLY INSTRUCTIONS
Features
No assembly required1.
Model: IVTD210
4MM HEX KEY, ALLEN, SHORT ARM
(INCLUDED)
TOOLS NEEDED
4mm HEX KEY, ALLEN, T-HANDLE
(INCLUDED)
B
B
B
B
A
C
C
C
C
A
B - .27 X 3 SOCKET WAFER A
8
A - .27 X 2-1/2 SOCKET WAFER A
16
C - 1/4-20 X 2-1/2 WAFER SHCS
8
11/19/2012
ASSEMBLY INSTRUCTIONS
(8) .27x3" screws
Step 1
Qty. Description
Step 3
Step 4
IVT3772
Set table upright and tighten all bolts.
__(8) Leg
(16) .27x2½" screws - Do not tighten yet.
__(1) Hardware pack
__(4) Foot
Attach braces to the leg assemblies using
__(4) Brace
Model:
Attach feet to legs using (8) 2½" Chair bolts.
__(1) Table top
Step 2
Lay the table frame on a flat surface.
Attach the leg assemblies to the frame using
HARDWARE IS COATED STAINLESS STEEL UNLESS OTHERWISE SPECIFIED
  • Page 1 1
  • Page 2 2
  • Page 3 3

Ivy Terrace IVS108-1-SA Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI