Perle IOLAN SDG4 L Quick start guide

Brand: Perle

Model: IOLAN SDG4 L

Type: Quick start guide

Perle IOLAN SDG4 L provides Serial to LTE/3G and Serial to Ethernet connectivity. It supports a broad range of 4G LTE cellular data networks, extensive security, flexibility, and IPV6 technology.

Here are some of its key capabilities:

Serial to LTE/3G and Serial to Ethernet connectivity: The IOLAN SDG4 L can connect serial devices to LTE/3G networks or Ethernet networks. This makes it ideal for applications where you need to connect serial devices to the internet or to a corporate network.
Support for a broad range of 4G LTE cellular data networks: The IOLAN SDG4 L supports a broad range of 4G LTE cellular data networks, including LTE-FDD, LTE-TDD, and LTE-M. This ensures that you can connect to the fastest and most reliable cellular network available in your area.

Perle IOLAN SDG4 L provides Serial to LTE/3G and Serial to Ethernet connectivity. It supports a broad range of 4G LTE cellular data networks, extensive security, flexibility, and IPV6 technology.

Here are some of its key capabilities:

Serial to LTE/3G and Serial to Ethernet connectivity: The IOLAN SDG4 L can connect serial devices to LTE/3G networks or Ethernet networks. This makes it ideal for applications where you need to connect serial devices to the internet or to a corporate network.
Support for a broad range of 4G LTE cellular data networks: The IOLAN SDG4 L supports a broad range of 4G LTE cellular data networks, including LTE-FDD, LTE-TDD, and LTE-M. This ensures that you can connect to the fastest and most reliable cellular network available in your area.

IOLANSDG4LA/LEQuickStartGuide‐P/N5500408‐10(RevC)

IOLAN SDG4 LA/LE

Quick Start Guide

______________________________________________________________

TheSDG4Lx(x=AforNorthAmericanmodel,x=EforEuropeanmodel)provides

SerialtoLTE/3GandSerialtoEthernetconnectivity.TheSDG4Lofferssupportfor

abroadrangeof4GLTEcellulardatanetworks,extensivesecurity,flexibilityand

IPV6technology.Thisguidecoversbasicinstallationandconfigurationandis

intendedforfirsttimesetuporproductevaluation.

Completedetailscanbefoundinthefollowingguidesat

www.perle.com/downloads.

 IOLANUser’sGuide

 IOLANCommandLineInterfaceReferenceGuide

 IOLANSDG4LA/LEHardwareInstallationGuide

What’s in the box?

 TheIOLANSDG4LAorSDG4LE

 QuickStartGuide(thisdocument)

 2XLTEantennae

 Poweradapter,strainreliefstrapandrubberfeet

 Wallmountbrackets

Hardware Overview



IOLANSDG4LA/LEQuickStartGuide‐P/N5500408‐10(RevC)

2

Button/SwitchFunctions

ResetButton

ToreboottheIOLANSDG4Lxinsertapaperclipintotheinsetholelabelledas

Resetandgentlypressinwardsandrelease.ThePower/ReadyLEDsontheIOLAN

SDG4LxwillgoOnandthenmomentarilyOffwhenreleasedtoshowthattheunit

hasbeenrebooted.Ifyouholdtheresetbuttonbetween3and10seconds,the

IOLANSDG4Lxwillresettheconfigurationtofactorydefault(eitherthePerleor

customdefaultconfiguration).Ifyouholdtheresetbuttongreaterthan10

seconds,thentheIOLANSDG4LxwillresettheconfigurationtothePerlefactory

defaultconfiguration.

ConsoleSwitch

ThedipswitchontheIOLANSDG4Lxissetinthefactorytoserial(downposition).

Unlessyouplantoattachaconsoletoport1oftheIOLANSDG4Lx,leavethedip

switchintheserialposition

Connecting the Hardware

Power

EitherthebarrelorTB(TerminalBlock)canbeusedtopowertheIOLANSDG4Lx.



Connectingthebarrelconnector

Plugthepoweradapterintoapowersocketandconnectthebarrelconnectorend

intotheIOLANSDG4Lx.Thepower/ReadyLEDshouldshowasolidgreen.

Connectingtheterminalblockconnector

1. EnsurepowerisNOTappliedtothewirespriortoconnection.

2. Oneachendwire(12‐20AWG),removetheinsulationfromthecopperwire5

mm(3/16ofaninch).

3. Loosentheleftscrewonthetopoftheterminalconnectorblock,theninsert

yourpositive(+)wireintotheleftterminalandscrewitdowntight(.51Nm

torque).Loosentherightscrewonthetopoftheterminalconnectorblock,

theninsertyournegative(‐)wireintotherightterminalandscrewitdown

tight(.51Nmtorque).

4. Re‐inserttheterminalblockconnectorifremoved.

5. Connectthepowercordstrainrelief,ifdesired.SeeSDG4LA/LEHardware

InstallationGuidefordetails.

IOLANSDG4LA/LEQuickStartGuide‐P/N5500408‐10(RevC)

3

6. Connectthegroundinglug(notprovided)tothegroundingscrew,ifdesired.

SeeIOLANSDG4LA/LEHardwareInstallationGuidefordetails.

ConnectingtheAntennas,Ethernetcableandserialdevice

1. ConnecttheLTEantennasbysimplyscrewingtheantennasontothe

connectorsontheIOLAN.

2. ConnecttheEthernetcable(Cat5/5e)fromtheRJ‐45plug(10/100/1000)to

theHUBorswitchthatwillprovidenetworkconnectivity(ifapplicabletoyour

application).

3. ConnecttheserialdevicestotheRJ45serialports.SeetheSDG4LA/LE

HardwareInstallationGuideforpinoutdetails.



Turnonpoweratsource.



Power On Cycle

WhenthepowerisconnectedtotheIOLAN,thePower/ReadyLEDwillcycle

throughseveralsequencesandwillendinasolidgreenoncetheunitisfully

bootedandreadytobeconfigured.IftheLEDisnotsolidgreenaftertwominutes,

seetheSDG4LA/LEHardwareInstallationGuide.



LED Guide

SystemReady

 GreenSolid—SystemReady

 Flashing—SystemisbootingorDIPswitchisinconsolemode

 Amber—Flashing—Booting

 Red—Errorcondition.SeeIOLANSDG4LA/LEHardwareInstallationGuide

Link10/100/1000(onEthernetLinkConnector)

 Green—1000Mbps(flasheswithactivity)

 Green/Amber—100Mbps(flasheswithactivity)

 Amber—10Mbps(flasheswithactivity)

 Off—NoLANconnection

WWANStatus

 Green—Awirelessconnectionhasbeenestablished/activity

 Greenflashing—Dataisbeingtransmittedoverthewirelessnetwork

 Off—Nowirelessconnectionisestablished

SignalStrength

 Amber—progressivesignalstrength

 Green–increaseinsignalstrength

SerialActivity

Off—Noserialactivity

On—Tx/Rxflasheswithtransmit/receiveserialactivity



IOLANSDG4LA/LEQuickStartGuide‐P/N5500408‐10(RevC)

4

Connecting the IOLAN to the WWAN Network

MicroSIMcard

TheSDG4LxrequiresthataMicroSIM(3FF)cardbeinstalledintheunit.TheMicro

SIMcardwillbeprovidedtoyoubyyournetworkprovider/carrier.

InstallingtheMicroSIMcard

1. RemovethescrewsfromthesideoftheSDG4Lxunit,andthenremovethe

coverplate.SeeFigure1.

2. InsertyourSIMcardintheslot.TheSIMcardwillonlyfitoneway(donot

forcetheSIMcardinoryoucoulddamageyourSDG4Lx).Gentlypressthe

SIMcardforwarduntilyouhearitclickintoplacewithintheslot.

3. ReplacethecoverplateandsecureittotheSDG4Lxwiththescrews.



Figure1

Configuring IOLAN SDG4 Lx

ToconfiguretheIOLANSDG4LxyoushouldfirstassignanIPaddresstoit.The

simplestwaytosettheIPaddressistouseoneofthefollowingmethods;

 EasyConfigWizard

 DeviceManager

TheEasyConfigWizardutilityandthefullfeaturedDeviceManagerPCsoftware

canbedownloadedfromthePerlewebsiteatwww.perle.com/downloads.

ToinitiallylogontotheIOLANSDG4Lxuserthefollowingcredentials;

Username:admin

Password:superuser(casesensitive)

Note:Youshouldchangetheadminpasswordtorestrictunauthorizedaccessto

yourSDG4Lx.

YouarenowabletoconfiguretherestoftheoperatingparametersoftheIOLAN

suchastheLTEAPNwhichisprovidedbyyournetworkprovider/carrier.

Foradditionalinformationonthevariousconfigurableoperatingparametersas

wellasmethodsofconfiguringyourIOLAN(i.e.HTTP,Telnet,SNMP),pleaserefer

totheIOLANUser’sGuide.



Registering the IOLAN

YoushouldregisterIOLANonlineat:

www.perle.com/support_services/warranty_reg.asp

Contacting Technical Support

ContactinformationforthePerleTechnicalAssistanceCenter(PTAC)canbefound

atthelinkbelow.

www.perle.com/support_services/support_request.shtm

Perle IOLAN SDG4 L Quick start guide

Brand: Perle

Model: IOLAN SDG4 L

Type: Quick start guide

Perle IOLAN SDG4 L provides Serial to LTE/3G and Serial to Ethernet connectivity. It supports a broad range of 4G LTE cellular data networks, extensive security, flexibility, and IPV6 technology.

Here are some of its key capabilities:

Serial to LTE/3G and Serial to Ethernet connectivity: The IOLAN SDG4 L can connect serial devices to LTE/3G networks or Ethernet networks. This makes it ideal for applications where you need to connect serial devices to the internet or to a corporate network.
Support for a broad range of 4G LTE cellular data networks: The IOLAN SDG4 L supports a broad range of 4G LTE cellular data networks, including LTE-FDD, LTE-TDD, and LTE-M. This ensures that you can connect to the fastest and most reliable cellular network available in your area.

Download PDF

report

Perle IOLAN SDG4 L Quick start guide

Perle IOLAN SDG4 L Quick start guide

Related papers

Other documents