Toyota Tundra Reference guide

Toyota
Brand
Toyota
Model
Tundra
Type
Reference guide

This manual is also suitable for

Toyota Tundra is a reliable navigation system that offers a variety of features to enhance your driving experience. With its intuitive voice recognition system, you can easily input destinations, make calls, and control audio functions without taking your hands off the wheel. The system also provides real-time traffic updates to help you avoid delays and find the most efficient routes.

Toyota Tundra is a reliable navigation system that offers a variety of features to enhance your driving experience. With its intuitive voice recognition system, you can easily input destinations, make calls, and control audio functions without taking your hands off the wheel. The system also provides real-time traffic updates to help you avoid delays and find the most efficient routes.

NAVIGATION SYSTEM
QUICK REFERENCE GUIDE
CUSTOMER EXPERIENCE CENTER
1-800-331-4331
00505-NAV12-TUN
Printed in U.S. A. 8 / 11
11-TCS-05003
TUNDRA
2 0 1 2
1
TABLE OF CONTENTS
LIMITATIONS OF THE QUICK REFERENCE GUIDE 1
BASIC OPERATION 2
DESTINATION INPUT 3
By Address 3
Note on Voice Recognition 5
Tips for Using Voice Recognition 5
By Address - Voice Recognition 5
DESTINATION INPUT - POINT OF INTEREST (POI) 7
Point of Interest by Name 7
Point of Interest by Category 8
Point of Interest by Category - Voice Recognition 9
SET HOME 10
CONNECT A BLUETOOTH PHONE 12
CALLING BY VOICE RECOGNITION 13
Dial by Number 13
Dial by Name 14
ADDITIONAL NAVIGATION FEATURES 15
Search Area 15
Route Preferences 15
3 Routes 15
Screen Preferences 15
Beep Setting 16
Voice Volume 16
Language 16
Clock Settings 16
Auto Screen Change 16
Voice Recognition Guidance
16
Estimated Distance and Time 17
Operation of Vehicle Emergency Screen 17
NAVTRAFFIC
18
NavTraffi c Preferences 19
VOICE COMMANDS 21
The Quick Reference Guide is designed to provide information on the basic operation
and key features of the navigation system. The Quick Reference Guide is not intended
as a substitute for the Navigation Owner’s Manual. We strongly encourage you to
review the Navigation Owner’s Manual so you will have a better understanding of the
navigation system capabilities and limitations.
LIMITATIONS OF THE QUICK REFERENCE GUIDE
2
BASIC OPERATION
MAP/VOICE Button
Repeat the last voice guidance prompt,
cancel the map scrolling feature, or
display the current position.
DESTINATION Button
Input the destination by one of several
methods.
SETUP Button
Adjust Preferences for: General Settings,
Clock, Voice, Navigation, Phone, Audio,
and Vehicle Maintenance.
INFO/PHONE Button
Access Phone, Map Data, and Calendar.
ZOOM IN/ZOOM OUT Icons
Touch to magnify or reduce the map
scale.
DISPLAY Button
Adjust the contrast, brightness or turn off
the screen.
AUDIO Button
Set the radio station presets, adjust the
balance and tone controls.
CURRENT VEHICLE POSITION Mark
Indicates the current position of the
vehicle and its directional heading.
NORTH-UP OR COMPASS MODE Icon
Touch to change the map display between
North-up or Head-up perspectives.
£
Ó
Î
{
x
È
Ç
n
WMA
TOYOTA
WM
WM
MA
1
2
3
4
5
6
7
8
9
TUNE-FILEPWR VOL
SEEK
TRACK
DEST
SETUP
LOAD
MAP
VOICE
FM
AM
SAT
AUDIO
DISP
DISC
AUX
.
CLOSE
.
INFO
PHONE
3
DESTINATION INPUT
BY ADDRESS
Press
DEST
on the faceplate followed
by .
Touch
and move to
step 4. To change Search Area, touch
and move to step 3.
Input the city name and touch
.
Touch the desired city name.
Input the street name and touch
.
Select the desired Search Area and
touch
.
step
1
step
2
step
3
step
4
step
5
step
6
Quick Tip - Enter the street name without prefi xes
such as North or the letter N. The system will display
the base street name without prefi xes or suffi xes on
the next screen.
4
DESTINATION INPUT
BY ADDRESS
Touch
.
Input the house number and touch
.
Touch the desired street name.
Select the desired Route
Preferences by touching
followed by
. Touch
to confi rm selection.
step
7
step
8
step
9
step
10
Touch to start route
guidance.
step
11
5
DESTINATION INPUT
step
1
step
2
Press on the steering wheel. After
the beep say, “Destination.”
After the beep say, “Address.”
TIPS FOR USING VOICE RECOGNITION
NOTE ON VOICE RECOGNITION
Say a street address number as single
digits. Examples:
125, say: “One two fi ve”
2000, say: “Two zero zero zero”
32307, say: “Three two three zero
seven”
tip
1
tip
2
tip
3
tip
4
tip
5
Have the full and correct address in mind.
The system will ask for the state, city, and
street name followed by the house number
as separate inputs.
Before using voice recognition, roll up all
windows and set the climate control fan on
low or off to reduce background noise in
the cabin.
Speak at a normal volume and pace, and
pronounce words clearly.
Numbered street names should be spoken
as in these examples:
1st Street, say: “First Street”
15th Street, say: “Fifteenth Street”
190th Street, say: “One Hundred
Ninetieth Street”
A large TALK icon
will appear on the
NAV screen to signal when to speak your
command.
The navigation system's voice recognition feature will compare your spoken words with
computer-generated word patterns preprogrammed in the database. If the system does not
provide your intended match, please try a different pronunciation. Voice-activation names are
not available for every street and city.
BY ADDRESS-VOICE RECOGNITION
Quick Tip - If you know your next command, you can
press
at any time to interrupt the prompt. Speak
your command after the beep.
tip
6
6
DESTINATION INPUT
BY ADDRESS-VOICE RECOGNITION
step
3
step
4
step
5
step
6
step
7
After the beep say, “Enter” to confi rm
destination.
Touch
to start route guidance.
After the beep say the city name or,
"Change state" to search in another
state.
After the beep say the street name.
After the beep say the house number.
7
DESTINATION INPUT - POINT OF INTEREST (POI)
POINT OF INTEREST BY NAME
Quick Tip - Touching next to the POI name will
display the address and telephone number.
Press
DEST
on the faceplate followed
by .
Touch .
Input the POI name and touch
.
Use
or to scroll up or down.
Touch the desired destination.
Touch
.
step
1
step
2
step
3
step
4
step
5
See page 15 to select desired Route
Preference. Touch to start
route guidance.
step
6
Quick Tip - If the POI isn’t listed in the database verify
the spelling and Search Area for accuracy.
8
DESTINATION INPUT - POINT OF INTEREST (POI)
POINT OF INTEREST BY CATEGORY
Touch
.
Touch the desired category location. Touch the desired category icon
followed by the desired sub-category.
Use
or to scroll up or down.
Touch the desired point of interest.
step
1
step
2
step
3
step
4
step
5
Touch . See page 15 to select
desired Route Preference. Touch
to start route guidance.
step
6
Press
DEST
on the faceplate followed
by .
9
DESTINATION INPUT - POINT OF INTEREST (POI)
POINT OF INTEREST BY CATEGORY - VOICE RECOGNITION
Press
on the steering wheel. After
the beep say, “Destination.”
After the beep say, “Point of Interest.”
After the beep say, “Near Here.” After the beep say, “Hotels.” See
page 22 for the list of recognized POI
categories in addition to those displayed
on the screen.
After the beep say the number that
corresponds to the desired destination.
step
1
step
2
step
3
step
4
step
5
After the beep say, “Enter” to confi rm
destination. Touch to start
route guidance.
step
6
Quick Tip - If you know your next command, you
can press
at any time to interrupt the prompt.
Speak your command after the beep.
10
SET HOME
Touch .
Make sure you are in the desired
Search Area. Touch
.
Input the city name and touch
.
step
2
step
3
step
5
step
6
Press
SETUP
on the faceplate followed
by
.
step
1
Touch .
Touch .
step
4
Tip - For security reasons, use a point close to
your home instead of your actual home address.
11
SET HOME
Input the street name and touch
.
Touch
followed by
to change the home
icon.
Touch the desired icon for your
home. Touch
at the
bottom right of the Edit Home
screen.
step
8
step
9
step
11
step
12
Touch the desired city name.
step
7
Touch the desired street name. Input the house number and touch
.
step
10
Quick Tip - Enter the street name without prefi xes
such as North or the letter N. The system will display
the base street name without prefi xes or suffi xes on
the next screen.
12
CONNECT A BLUETOOTH PHONE
Touch . Verify that
Bluetooth feature on the phone is ON
and is in discoverable mode.
step
2
step
3
Press
INFO
PHONE
on the faceplate followed
by
.
step
1
Input the passkey listed on the screen
into the approved Bluetooth cell
phone. Please refer to the cell phone
manufacturer’s user guide for pairing
procedures.
Upon connection, the system will
indicate that the pairing process was
successful.
step
4
Quick Tip - Up to 4 Bluetooth cell phones can be
paired. However, only one Bluetooth cell phone can
be used at a time.
If you have diffi culty pairing your phone, or are unable to transfer your cell phone book, please refer to
the cell phone manufacturer's user guide. If you are able to successfully transfer your phone book, you
can dial by name using voice recognition. Please say the name exactly as it is entered in your phone
when in the telephone screen.
13
CALLING BY VOICE RECOGNITION
After the beep say, “Dial by Number.”
Call is active when
is
indicated. To end call, press
on the screen or
on the steering
wheel.
step
2
step
3
step
5
Press on the steering wheel. After
the beep say, “Phone.”
step
1
After the beep say the phone number
digits individually, without pausing (e.g.
“Three, one, zero, four…”).
After the beep, say “Dial” or press
on the steering wheel.
step
4
Quick Tip - A noisy environment may prevent the
voice recognition system from understanding your
commands. It is recommended that you reduce
background noise (including passenger conversation
and wind noise) prior to using the Voice Recognition
system.
Quick Tip - If you know your next command, you
can press
at any time to interrupt the prompt.
Speak your command after the beep.
Some Bluetooth
®
equipped cell
phones may or may not show battery or signal strength
on the display.
DIAL BY NUMBER
14
CALLING BY VOICE RECOGNITION
DIAL BY NAME
Press
on the steering wheel. After
the beep say, “Phone.”
step
1
Quick Tip - If you know your next command, you
can press
at any time to interrupt the prompt.
Speak your command after the beep.
After the beep say, “Dial by Name.”
step
2
step
3
After the beep say the name from the
contact list. If there is more than one
phone number for the contact follow
the prompt.
After the beep, say “Dial” or press
on the steering wheel.
step
4
Call is active when is indicated.
To end call, press
on the screen
or
on the steering wheel.
step
5
If you have diffi culty pairing your phone, or are unable to transfer your cell phone book, please refer to
the cell phone manufacturer's user guide. If you are able to successfully transfer your phone book, you
can dial by name using voice recognition. Please say the name exactly as it is entered in your phone
when in the telephone screen.
15
ADDITIONAL NAVIGATION FEATURES
Once the address has been inputted, select the desired
route preference(s) for the trip. When the yellow bar
appears, the preference has been selected. For example,
if Toll Roads is not selected, the system will route over
non-toll roads which may take longer to reach the
destination.
ROUTE PREFERENCES
Touch
to select from seven different screen
viewing options. Four screen preferences are available
when the map is visible and three additional are available
during route guidance only.
3 ROUTES
SCREEN PREFERENCES
One of three routes may be chosen for the trip.
Quick- offers the shortest route by time
Alt- is the second fastest route
Short- is the most direct based upon driven mileage
Single Map
SEARCH AREA
Sin
g
g
le Map
* Selections available when
in guidance mode only.
Dual Map
Compass
Freeway
Information
* Turn List
* Arrow
* Intersection
Guidance
Prior to inputting the desired address select the Search
Area by pressing . If the incorrect Search
Area is chosen, the system will either fi nd an address
that closely matches in that area or will indicate that the
address cannot be found.
Select the desired Search Area and touch
.
16
CLOCK SETTINGS
PRESS
SETUP
>
Adjust the Time Zone and Daylight Saving Time option.
ADDITIONAL NAVIGATION FEATURES
LANGUAGE
PRESS
SETUP
>
Select Language Preference: English, French or Spanish.
PRESS
SETUP
>
Adjust the Voice Guidance volume level.
BEEP SETTING VOICE VOLUME
AUTO SCREEN CHANGE
PRESS
SETUP
>
Once the screen transition is switched off, the audio
screen will remain without reverting to the map display.
PRESS
SETUP
>
Adjust the Beep sound On or Off.
PRESS
SETUP
>
Disables system guidance for voice commands. Only
on-screen guidance will be available when switched off.
VOICE RECOGNITION GUIDANCE
17
ESTIMATED DISTANCE AND TIME
†
†
The system does not account
for traffi c signals or traffi c fl ow.
ADDITIONAL NAVIGATION FEATURES
OPERATION OF VEHICLE EMERGENCY SCREEN
Touch the desired emergency category. If the vehicle is in
motion, only nearby police stations, dealers, hospitals or
fi re stations are shown.
Press
DEST
on the faceplate followed by and then
to access four emergency destinations:
• Police Stn. • Hospital • Dealer • Fire Stn.
The system can be customized to match your driving
habits. Adjust the speed settings for Residential, Main
Streets and Freeways to match your normal driving
speed. Adjusting these settings will affect the estimated
time of arrival (ETA).
Please refer to the Navigation Owner's manual for a
complete description of this feature.
PRESS
SETUP
> >
>
18
Route guidance with fl ow information and traffi c events.
Accidents and disabled vehicles.
Traffi c events - road construction.
NavTraffi c integrates with your navigation system to display continuously updated traffi c
information for 100 markets.
New TUNDRA owners with factory-installed navigation receive a 90-day complimentary trial
subscription to NavTraffi c from SiriusXM.
For more information, see www.siriusxm.com/navtraffi c
NAVTRAFFIC
XM services require a subscription after trial period and are sold separately or as a package. See SiriusXM Customer
Agreement for complete terms at www.siriusxm.com. If you decide to continue your SiriusXM service at the end
of your complimentary trial, the plan you choose will automatically renew and bill at then-current rates until
you call 1-866-635-2349 to cancel. Fees and programming subject to change. Available only to those at least 18
years of age in the 48 contiguous United States and D.C.
19
Press
MAP
VOICE
on the faceplate followed
by .
step
1
step
2
NAVTRAFFIC PREFERENCES
Touch
. When the
yellow bar appears, the preference has
been selected. Touch , traffi c
fl ow is displayed by colored lines
alongside freeway or highways:
SHOW NAVTRAFFIC INFORMATION
Free fl ow traffi c
Moderate traffi c
Heavy congestion
Press
SETUP
on the faceplate followed
by .
step
1
step
2
Touch .
AUTO AVOID TRAFFIC
step
3
Select from the Auto Avoid
Traffi c option. Touch
followed by . The system will
automatically select another route when
moderate or heavy traffi c is detected
during route guidance.
NAVTRAFFIC
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23

Toyota Tundra Reference guide

Toyota
Brand
Toyota
Model
Tundra
Type
Reference guide
This manual is also suitable for

Toyota Tundra is a reliable navigation system that offers a variety of features to enhance your driving experience. With its intuitive voice recognition system, you can easily input destinations, make calls, and control audio functions without taking your hands off the wheel. The system also provides real-time traffic updates to help you avoid delays and find the most efficient routes.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents