Buick Regal Navigation System - 2011
Infotainment System 9
3. Select the street name field.
Enter the street name. Do not
enter directional information or
street type. Use the space
screen button between street
and city names. For example,
enter N. Royal Oak Rd as Royal
Oak. Select the backspace
q
screen button to delete an
incorrect character.
A list displays if four or fewer
names are available. If there
are more than four, there is a
match counter with a number of
available streets. Select the List
button to view the list and select
the street.
4. Select the city from the list or
enter the city name.
5. Enter the house number. This
field is automatically selected.
6. Select OK by pressing the
preset 6 button on the faceplate.
The address information screen
displays the address entered.
7. Select preset 6 if correct. The
route will calculate.
8. Select the route preference
preset for Fastest, Shortest,
or Easiest. The chosen route
preference highlights. See
“Navigation Settings” under
Using the Navigation System on
page 38 for more information.
9. Select Start by pressing the
preset 6 button. The route is
calculated.
See “Address Entry” under
Destination on page 49 for more
information.
Entering a Point of Interest (POI)
To set a destination by entering a
Point of Interest (POI):
1. Press
O to turn the system on.
2. A Caution could appear.
Select OK by pressing the
preset 6 button.
3. Press the DEST button.
4. Select the Point of Interest.
5. Enter the specific title of the
POI in the POI name space
(e.g., Washington Monument).
If four or fewer names are
available, a list displays. If more
than four are available, there is a
match counter with a number in
it, representing the number of
available POI names. Select the
List by pressing the preset 6
button to view the list. Select
the POI.
6. Select GO by pressing the
preset 6 button on the faceplate
if correct. The route will
calculate.
7. Select the route preference
preset for Fastest, Shortest,
or Easiest. The system
highlights the route.
8. Select Start by pressing the
preset 6 button. The route is
now ready to be started.
See “Point of Interest (POI)” under
Destination on page 49 for more
information.