Support OzSpy User manual

Type
User manual
1 | P a g e
OzSpy Custom Built Covert Camera
Manual
Quick Reference Guide
INTRO
This system uses state of the art Wi-Fi video module to allow streaming of your video of up to 1080p
(depending on your phone’s capability) and back up recordings of 720p to the on-board memory.
All of our custom built systems are handmade and tested to the highest quality standards.
Please read this setup guide carefully to ensure a simple setup and operation of the unit.
Please note there are other advanced features of these units that can be learned about from our full
manual.
THE HARDWARE
The hardware used in this system is delicate high sensitivity electronics so we strongly recommend
that you do not touch or handle the internal module.
The unit also has a switch which disables the battery. For permanent connection switch battery off.
For charging and portable use switch battery on.
2 | P a g e
DOWNLOAD THE APP
The first step in using these units is to download the apps to your phone.
We recommend downloading the following apps as some phones work better with one and some
with the other.
p2pCam Viewer
Sysm-P2P IP Cam
Both apps operate the same so we will only show setup for one.
Green circle Play/Pause
Black circle SD card slot
Red circle Power
Blue Circle Micro USB
3 | P a g e
CONNECTING TO YOUR MOBILE
Once the unit is on scan for the module with
your phones Wi-Fi. You will see it appears with
a long alphanumeric name similar to this
image. Ensure the module is on P2P.
Connect to the device
4 | P a g e
WATCHING LIVE VIA LOCAL MOBILE TO DEVICE CONNECTION
Once you have connected your mobile and downloaded the apps simply open an app and follow
these steps.
Open App and click LAN
Select the camera that shows
connection and click on it.
Decide if you want HD, Smooth or Faster
video
5 | P a g e
You are now connected and streaming video
SETTING UP YOUR PERMANENT WI-FI CONNECTION VIA WI-FI MODEM
Turn on camera and connect to the device as done in “connecting to your mobile” step. Ensure the
module has been changed from P2P to IP before turning on (as shown in first picture).
6 | P a g e
Once
connected to
your Wi-Fi
open the
mobile app
your using
and click on
the QR scan
and fill in the
access code
(found on the
module) click
Login
Click on More
7 | P a g e
Click on “Wi-
Fi” and enter
the Wi-Fi you
want to
connect to
along with
the password,
press OK.
Disconnect from the Wi-Fi on your phone and connect to your phones “Mobile Data”. You are now
connected to your camera and you can view a live feed from anywhere using the app on your phone.
N.B Please be sure to reset your camera when changing back to mobile to device connection
8 | P a g e
ACCESSING RECORDED FILES VIA THE APP (SAME WITH BOTH METHODS)
9 | P a g e
Whilst in the app you can click on blue arrow to change various settings such as Alarm and System
settings.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

Support OzSpy User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI