Safety Precautions
Mic
BUTTON Control Area
FCC Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in
a particular installation.If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for
help.This device complies with part 15 of the FCC Rules. Opera-
tion is subject to the following two conditions:
(1) This device may not cause harmful interference, and(2) this
device must accept any interference received, including interfer-
ence that may cause undesired operation.
FCC RF exposure statement:
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure condi-
tion without restriction.
Warning:
Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user's
authority to operate the equipment.
Need help? We're here for you everyday from 7a.m.-9p.m.
CST.Give usa call at 1-888-516-2630.
Produced for Walmart Inc. ,
Bentonville, AR 72716
Ver.01 11/15/2023 FCCID :2ADZH-2890
x 1 Press
Press & Hold 2 sec
Press & Hold 2 sec
x 1 Press
x 2 Press
x 1 Press
Increase Volume
Decrease Volume
Increase Volume
Decrease Volume
Next Track
PHONE CALLSPLAY MUSIC
Control Action Result
Play / Pause
POWER ON & POWER OFF
onn. On-Ear
Press the multifunction button for about 2 seconds and
the blue indicator flashes for 2 seconds.
Press the multifunction button for about 3.5 seconds and
the red indicator flashes for 2 seconds.
POWER ON
POWER OFF
CHARGE THE Headphones
Siri / Google Assistant
Previous Track
x 1 Press
x 1 Press
Press & Hold 2 sec
x 1 Press
x 1 Press
Hang up
Control Action Result
Answer Call
Reject Call
CHARGING PORT
LED INDICATOR
CHARGING CABLEAUDIO CABLE
AABLUE100002890_EN_11152023
Contents & Information Overview
USER GUIDE
Wireless Earphones
CONTENTS & INFORMATION
Features
First time setup
Power on & Power off
Pairing
Play music
Phone calls
Charging
OVERVIEW
SAFETY PRECAUTIONS
OPERATION
CLEANING & CARE
Cleaning
SPECIFICATIONS
TROUBLESHOOTING
•
•
•
•
•
•
•
Model: AABLUE100002890
Speaker Rated Input Power: 10mW
Speaker Maximum Input Power: 15mW
Speaker Diameter: 30mm
Speaker Impedance: 32Ω±15
Sensitivity: 99±4dB
Features
Weight
0.32 lb
TroubleshootingOperation Cleaning & Care
Specifications
Product Dimensions (L x W x H)
6.77 x 2.85 x 6.67 inches
172 x 72.5 x 169.5 mm
Charging: Red LED light is on
Fully charged: Blue LED light is on
CHARGING
PORT
5V 0.5A
About 2 hours
Problem
Cannot find
“ onn. On-Ear ”
on my
Bluetooth
device.
Sound is not
produced.
Cannot
power on
Prevention/Solution
Ensure you have headphones connected
with Bluetooth device, and increase
volume from your device.
Double check if the headphones already
connected with last-time paired device.
Ensure Bluetooth function is enabled on
your device.
•
•
•
• Charge headphones for enough time.
1-888-516-2630
THIS GUIDE CONTAINS
IMPORTANT SAFETY
INFORMATION.
For product assistance
WE CAN HELP
PLEASE READ AND KEEP
FOR FUTURE REFERENCE.
7 DAYS/WEEK
7:00am- 9:00pm CST
Find more at
Manufactured in Vietnam for: Walmart, Inc.
(Red : 20% < battery)
•Audio Cable: 120cm
•
Charging Cable: 50cm
CLEANING
. Wipe down surfaces with a cleaning cloth.
. Never use abrasive pads to clean device.
. Avoid using liquids to clean device.
1
2
. It is recommended that you use the provided charging cable.
. The headphones will automatically power off when charging.
It may take up to 2 hours to get it fully charged when at
0% battery.
1
2 3
PAIRING
Safety Precautions
A .
B .
lf this is the first time connecting your headphones,
follow FIRST TIME SETUP instructions.
If you want to pair your headphones with a new device,
please disconnect it from the Bluetooth list of your
current device. Once disconnected, it will go to pairing
mode automatically.
CHARGING
Note: 10 mins charge can provide around 3 hours playtime.
3.5mm Aux In Port
(Audio cable for wired
listening included)
Remove the protective film before the first use, then
power on the headphone and it will go to pairing mode
automatically. Headphone will automatically reconnect to
the last paired device when powered on next time.
CAUTION
Only use a USB
charging device that
is 5V DC output.
FIRST TIME SETUP
Device may need to be charged before use.
2s
3.5s
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Onn Wireless On Ear Headphones User guide
-
Onn 4715 Wireless Earphones User guide
-
Onn BM1023 User guide
-
Onn Rugged Speaker User guide
-
Onn ONN28871 Groove Wireless Earphones User guide
-
Onn 100025111 User guide
-
Onn 100094794 User guide
-
Onn BWD021 User guide
-
Onn 100069443 Wireless Open Ear Earphones User guide
-
Onn indoor Speaker User manual
