技术要求:
1.需符合(环保)要求:RoHS2.0、REACH、CP65
2.材质: 157g铜版纸
3.表面处理:2专正反印刷过哑油
4.外观要求:无脏污、无破损、无色差、无印刷不良等现象
颜色:参考样品 印刷内容:参考图纸和样品
5.条码扫描等级:A级
6.装配:-
7.包装:牛皮纸或纸箱
8.测试要求:/
9. 尺寸为重点检测:
图
面
尺
寸
0.15
0.80
0.5°
±
±0.03
0.13
0.16
0.20
0.25
0.05
0.07
0.10
±
±
±
±
±
±
±
B级A级
公差等级
指定公差
未标注公差以指定公差表计算
±
±
±
±
±
±
±
0.20
0.10
0.40
0.35
0.30
0.25
0.05
±
±
ANGLES
<1
1-<10
10-<30
30-<60
60-<100
100<150
150-<200
200
單位:mm
0.60
0.50
0.70
±
±
±
±
0.20
0.30
±
0.40
0.10
±
1°
C级
1°
±
±
±
1/1
文件编号:
零件名称:
NO 变更内容 变更者 日 期 1/1
mm
核准:
审核:
零件料号:
投影方向:
单位:
页数:
比例:
版本:
产品型号:
绘图:
A/0
CH-5181B 说明书
印刷内容/表面处理参考样品!
折叠方式:风琴五折
Get to Know your Headphones
1. Wireless Bone Conduction Headphones x1
2. Charging Cable With Magnetic Connection x1
3. Quick Start Guide x1
4. Storage pouch x 1
What’s in the Box?
Check to make sure you
have everything below
12
3 4
Wireless Bone
Conduction Headphones
Quick Start Guide
01
Pairing
* Connect to your device through Bluetooth wireless technology,
search for the entry " onn. Bone Conduction ".
* Multipoint connection: Press and hold "volume up" and "volume
down" buttons together for 1s to entry pairing model.
Let's Get Started!
onn. Bone Conduction
Charge your Headphones
04
02
Press and hold power button for 2s until you hear ”power on”.
Power On
Power o
Press and hold power button for 2s until you hear ”power o”.
Enjoy your Music
Power On/O/Pairing
Wireless Bone
Conduction Headphones
Quick Start Guide
We’d Iove to hear from you. Scan
with your Walmart app and let us
know what you think.
The Fine Print
This equipment has been tested and found to comply with the
limits for a Class B digital device,pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of
the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
FCC Statement
The Fine Print The Fine Print
FCC ID : 2ALVK-ONN94794Ver.01 12/18/22
Changes or modifications to this unit not espressly approved
by the party responsible for
compliance could void the user´s authority to operate the
equipment.
Produced for Walmart Inc.,
Bentonville,AR 72716
Need help? We're here for you every day from 7 a.m.-9 p.m.
CST. Give us a call at 1-888-516-2630.
Warning:
-- Consult the dealer or an experienced radio/TV technician for
help.This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
( 1 ) This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. End user must follow the
specific operating instructions for satisfying RF exposure
compliance. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
The portable device is designed to meet the requirements for
exposure to radio waves established by the FCC. These
requirements set a SAR limit of 1.6 W/kg averaged over one gram
of tissue. The highest SAR value reported under this standard
during product certification for use when properly worn on the
head.
WARNING:
Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Take a clear Phone call
100094794
94346 00502 41
Answer a call
x1 Press power button
Hang up a call
x1 Press power button
Reject a call
x2 Press power button
Next song
Press and hold
Volume up
x1 Press
Play/Pause
x1 Press power button
Siri/Voice Assistant
x2 Press power button
Previous song
Press and hold
Volume down
x1 Press
5V 0.5A
Connect USB-A to 5V power adapter. Use the in-box cable to
charge headphones.
The LED indicator will be red when charging. The LED indicator
will be green when fully charged.
About 1.5 hours
2S