Furniture of America IDI-151164 Installation guide

Brand
Furniture of America
Model
IDI-151164
Type
Installation guide

Furniture of America IDI-151164 is ready-to-assemble furniture that is built to last with correct assembly and maintenance. To ensure a smooth assembly process, read through the entire instruction manual and study the diagrams before beginning the assembly. Make sure all parts and tools are gathered and accounted for before starting assembly. Assemble the furniture on a protective surface such as a carpet or cardboard to prevent damage. During assembly, ensure parts are properly aligned before tightening with the provided tools. Do not overtighten.

Furniture of America IDI-151164 is ready-to-assemble furniture that is built to last with correct assembly and maintenance. To ensure a smooth assembly process, read through the entire instruction manual and study the diagrams before beginning the assembly. Make sure all parts and tools are gathered and accounted for before starting assembly. Assemble the furniture on a protective surface such as a carpet or cardboard to prevent damage. During assembly, ensure parts are properly aligned before tightening with the provided tools. Do not overtighten.

ASSEMBLY RATING
The Assembly Rating is a 5-point system
that shows the degree of effort needed in
assembling a specific product (with 1 being
easy and 5 being difficult). For most
products,two persons are recommended.
EASY
DIFFICULT
Page 1 of 12
Hammer
Phillips Screwdriver
Tools Required for Assembly:
2 PERSONS RECOMMENDED
(Not Included)
(Not Included)
Furniture America
R
E-commerce Division - Enitial Lab
TM
ITEM#:151164
VERSION:20150724
Page 2 of 12
Thank you for your purchase!
We hope you wiIl enjoy your new product for many years to come. Our commitment
to providing quality products does not simply end when a purchase is made. We
stand behind our products and will provide any support needed in order for you to
fully enjoy your purchase. Your satisfaction is the greatest recognition we could
have.
Because we value your trust in our company,we will do our best to meet your
service expectations. Should you have any assembly reIated questions,parts
replacement requests, comments or suggestions, please feel free to contact us any
time. To help expedite the service, please have the assembly instructions avaiIable,
along with your order receipt.
www.foagroup.com
cs.ec@foagroup.com
Toll-Free 1-888-980-5122 or 1-626-363-9311
1-626-270-4451
Monday to Friday 8:30 a.m to 5:30 p.m.(PST)
http://
https://twitter.com/foagroup
http://instagram.com/foagroup#
https://www.youtube.com/user/FurnitureOfAmerica
http://www.pinterest.com/foagroup/
Furniture America
R
E-commerce Division - Enitial Lab
TM
Page 3 of 12
Furniture America
R
TM
FURNITURE OF AMERICA.ALL RIGHTS RESERVED.
FAILURE TO FOLLOW THE GUIDELINES ABOVE MAY
RESULT IN INJURY AND/OR PROPERTY DAMAGE.
IT IS THE USER'S RESPONSIBILITY TO MAINTAIN THE FURNITURE.THE HARDWARE MAY
LOOSEN OVER TIME AND MAY CAUSE THE FURNITURE TO BE WOBBLY AND UNABLE TO
SUPPORT ITS INTENDED WEIGHT CAPACITY.THIS MAY LEAD TO COLLAPSE AND MAY CAUSE
SERIOUS INJURY.
TURN
CLOCKWISE TO
TIGHTEN
FOR YOUR FURNITURE TO LAST,CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY
PLEASE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE.
BASIC ASSEMBLY TECHNIQUES
It is highly recommended that the
assembly should be done near the
area of its intended location. Make
sure you have enough space to move
around during the assembly.
Position each part correctly and insert
screws or bolts into their respective
holes by hand tighten or using the
proper hand tool. Only tighten when
step is completed or when instructed
to do so.
Use cardboard or carpet area when
assembling furniture to prevent
scratches.Make sure the furniture
rests on a flat and level surface with
each leg evenly touching the floor.
ALWAYS have at least two people to
help with transporting and assembling
the product to avoid any potential
injury and/or damage.
Make sure all parts are properly
aligned,then use the appropriate
hand tool to completely tighten the
bolts or screws.Do not use power
tools and do not overtighten.
Save the instructions and store any
supplied tool for later maintenance.
After two weeks,check and tighten
any loose hardware and repeat again
every six months thereafter.
Page 4 of 12
Unless you are particularly adept at assembling flat-pack/knock-down
furniture, we understand building ready-to-assemble furniture can be a
frustrating experience for some. To help avoid confusion and to make
the assembly process quicker and smoother, we have provided some
helpful tips. Before you begin the assembly, please read the following :
Due to the size and/or weight on most of the ready-to-assemble furniture, it is
highly recommended that the assembly should be done near the area of its
intended location. Make sure you have enough space to move around during
the assembly. ALWAYS have at least two people to help with transporting and
assembling of the product to avoid any potential injury and/or damage.
To protect from damage, assemble the item on a clean, protective surface,
such as on a carpet or cardboard.
Make sure you have taken all the parts and hardware out of their packaging.
Do not throw away packaging material until assembly is completed.
Make sure all parts and hardware are accounted for by comparing the actual
parts and hardware to the list provided in the assembly instructions. Also
check for any irregularity such as crack, flaw or improperly drilled hole. If there
is any problem or missing piece, please contact the manufacturer or the
supplier. Please have the model number, part number and a brief description
of the problem ready will help expedite the replacement process.
Read the entire instruction manual and view the diagrams first before
assembling. Arrange your parts in order of use and group the identical
hardware together to make it easier to grab each piece as you begin to
assemble.
During the assembly process, make sure parts are properly aligned before
tightening with the tool provided or required for the assembly. Do not use
power tools and do not over tighten.
When applying glue to the wood dowels to bond the parts together, please be
ABSOLUTELY certain that the parts are correct and lined up with each other
(refer to diagrams and take notice of the various pre-drilled hole locations).
When in doubt, assemble the parts together first and if the parts fit right, then
apply glue to the wood dowels.
1.
2.
4.
3.
5.
6.
7.
Page 5 of 12
(1)
(2)
(3)
(4)
Secure the threded
end of the cam bolt
by using a
screwdriver.
Note:Every cam lock bolt
must have a cam lock
connector in order to
fasten the parts together.
Align the cam connector with its
side opening (or arrow)
pointing to the small
driIIed hole.
Tun right (clokwise) to tighten.
Insert the cam lock
bolt into the
pre-drllled hole
above the cam
connector.
Turn right(clockwise) to tighten.
Two parts should fit snugly
against each other.
Turn the cam connector with a
screwdriver until it will not turn
any more with light to moderate
force.
Page 6 of 12
Before you begin,please read"Assembly and
Care Advice","Pre-Assembly Introduction"and
"Cam Lock Fastener Assembly Instructions".
Page 7 of 12
Due to the size and/or weight of this product,it is highly
recommended that the assembly should be done near the
area of its intended location.Make sure you have enough
space to move around during the assembly.ALWAYS have
at least two people to help with transporting and assembling
the product to avoid any potential injury and/or damage
Page 8 of 12
Cх2
Tх8
Sх8
Page 9 of 12
5
11
Bх6
Aх6
Page 10 of 12
Page 11 of 12
Wх4
W x 5
Page 12 of 12
Make sure the unit is rested on a flat surface
and does not feel loose or wobbly
If it does,double check that the bolts/screws
are secured and properly tightened
ASSEMBLY IS COMPLETED
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Furniture of America IDI-151164 Installation guide

Brand
Furniture of America
Model
IDI-151164
Type
Installation guide

Furniture of America IDI-151164 is ready-to-assemble furniture that is built to last with correct assembly and maintenance. To ensure a smooth assembly process, read through the entire instruction manual and study the diagrams before beginning the assembly. Make sure all parts and tools are gathered and accounted for before starting assembly. Assemble the furniture on a protective surface such as a carpet or cardboard to prevent damage. During assembly, ensure parts are properly aligned before tightening with the provided tools. Do not overtighten.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents