Elkay D115161 Specification

D115161
Elkay
Brand
Elkay
Model
D115161
Category
Kitchen sinks
Type
Specification

Elkay D115161 is a top-mount sink made of 23 gauge, 300-series, nickel-bearing stainless steel with a polished satin finish. It features coved corners with a 2-1/4" vertical and horizontal radius for easy cleaning. The sink has a bowl depth of 5-1/8" and an overall dimension of 15" x 15". It comes with a 3-1/2" drain opening and includes installation hardware for a 3/4” countertop. The sink complies with ASME A112.19.3/ CSA B45.4, IAPMO, Uniform Plumbing Code, International Plumbing Code, and National Plumbing Code of Canada. It is also ADA and ANSI/ICC A117.

Elkay D115161 is a top-mount sink made of 23 gauge, 300-series, nickel-bearing stainless steel with a polished satin finish. It features coved corners with a 2-1/4" vertical and horizontal radius for easy cleaning. The sink has a bowl depth of 5-1/8" and an overall dimension of 15" x 15". It comes with a 3-1/2" drain opening and includes installation hardware for a 3/4” countertop. The sink complies with ASME A112.19.3/ CSA B45.4, IAPMO, Uniform Plumbing Code, International Plumbing Code, and National Plumbing Code of Canada. It is also ADA and ANSI/ICC A117.

Bowl Depth is 5-1/8"
Model D115152 Illustrated
GENERAL
Sink is formed of #23 gauge, 300series, nickel bearing stain-
less steel.Topmount.
DESIGN FEATURES
Bowl Depth: 5-1/8" (130mm)
Coved Corners: 2-1/4" (57mm) vertical and horizontal radius.
Finish: Exposed surfaces are polished to a satin finish.
Underside: Undercoated on bottom of bowls to reduce
condensation and dampen sound.
SINK PACKAGE
DP211515C Package includes:
(1) D11515 sink.
(1) LKA2475 faucet.
(1) D5018A drain with basket strainer.
OTHER
Drain Opening: 2" (51mm) (D11515, DP211515C), 3-1/2" (89mm)
(D11516).
NOTE: Unless otherwise specified, sink is furnished with 2 faucet
holes as shown.
Installation Hardware: Included for 3/4” (19mm) countertop.
Model D115152
SINK DIMENSIONS (INCHES)*
Elkay
elkaypro.com
2222 Camden Court
Oak Brook, IL 60523
©2014Elkay
(
Rev.2/14) 02-03L
Dayton
®
Hospitality Sinks
and Sink Package
Models D11515, D11516 and DP211515C
S P E C I F I C AT I O N S
Model DP211515C
*
Length is left to right. Width is front to back.
Model
Number
D
P211515C 2
D11515 1, 2 or 3
1, 2 or 3
D11516
Minimum
Cabinet
Size
18
(457mm)
18
(457mm)
18
(457mm)
No. of 1-1/4”( 32mm)
or 1-1/2”(38mm)
Dia. Faucet Holes
4"(102mm) Center
14-3/8
(365mm)
14-3/8
(365mm)
14-3/8
(365mm)
14-3/8
(365mm)
14-3/8
(365mm)
14-3/8
(365mm)
Cutout in
Countertop
(1-1/2"(38mm)
Radius Corners)
L W
Overall
Inside Bowl
L
W
L W D
15
(381mm)
12
(305mm)
10
(254mm)
5-1/8
(130mm)
15
(381mm)
15
(381mm)
12
(305mm)
10
(254mm)
5-1/8
(130mm)
15
(381mm)
15
(381mm)
12
(305mm)
10
(254mm)
5-1/8
(130mm)
15
(381mm)
HOLE DRILLING
CONFIGURATIONS
1
(1-1/4" (32mm) diameter)
2
3
(1-1/4" (32mm) diameter)
(1-1/2" (38mm) diameter)
4"
(102mm)
4"
(102mm)
4"
(102mm)
2-1/4" R
(57mm)
4"
(102mm)
15”
(381mm)
10"
(254mm)
15”
(381mm)
12"
(305mm)
C
Sinks are listed by IAPMO as meeting the applicable
requirements of the Uniform Plumbing Code , International
Plumbing Code , and National Plumbing Code of Canada.
Sink complies with ASME A112.19.3/ CSA B45.4
These sinks are compliant to ADA and ANSI/ICC A117.1
accessibility requirements when installed according to the
requirements outlined in these standards.
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice
. Please visit elkayusa.com for most current version of Elkay
Product specification sheets.
This specification describes an Elkay product with design, quality and functional benefits to the
user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
  • Page 1 1

Elkay D115161 Specification

D115161
Elkay
Brand
Elkay
Model
D115161
Category
Kitchen sinks
Type
Specification

Elkay D115161 is a top-mount sink made of 23 gauge, 300-series, nickel-bearing stainless steel with a polished satin finish. It features coved corners with a 2-1/4" vertical and horizontal radius for easy cleaning. The sink has a bowl depth of 5-1/8" and an overall dimension of 15" x 15". It comes with a 3-1/2" drain opening and includes installation hardware for a 3/4” countertop. The sink complies with ASME A112.19.3/ CSA B45.4, IAPMO, Uniform Plumbing Code, International Plumbing Code, and National Plumbing Code of Canada. It is also ADA and ANSI/ICC A117.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents