Page is loading ...
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
DIR
DROP-IN RACK DISPENSER
DIR-1020
DIR2-1020
DIR-2020
Project Name
N
O
# Item N
O
# Quantity
CONSTRUCTION:
The construction of the model DIR shall be a top
flange with self levelers bolted to the underside
of the flange.
Shall be 14 gauge grade 18-8 stainless steel angle,
welded ground and polished. The outer edge of
the flange shall be beveled for additional strength,
and to provide a snug fit with the counter top.
SELF LEVELING: Elevators shall be stainless steel
die stamped telescoping tubing non-fatiguing
compression type springs stainless steel totally
enclosed.
SPECIFICATIONS
“ALL PRICES AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE”
FOR HIGH VOLUME CUP DISPENSING
FOR CAFETERIA AND TRAY MAKE-UP AREA
OPTIONS AND ACCESORIES
Dispensers available to fit other size racks
upon request
41
MODEL DIR-2020
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
42
DIR
DROP-IN RACK DISPENSER
SPECIFICATIONS:
RACK CAPACITIES VARY WITH THE SIZE
AND TYPE OF RACKS USED
*MODEL DIR2-1020 DISPENSES TWO
SEPARATE STACKS OF RACKS
BUMPERS ADD 1-3/4” TO L & W
*STANDARD HEIGHT IS 27-1/2”
OPTIONAL 23-1/2” OR 31-1/2” HEIGHTS
AVAILABLE AT ADDITIONAL COST
SELF-LEVELING
CUP & GLASS
TRAY DISPENSER
MODEL MAXIMUM RACK SIZE
FLANGE O.A.
LENGTH • WIDTH
COUNTER CUT-OUT
SHIP.
WT.
DIR-1020 10-1/4” x 20-1/4” 15-5/8” x 25-5/8” 11-3/4” x 24-5/8” 36 LBS.
*DIR2-1020 10-1/4” x 20-1/4” 26-5/8” x 25-5/8” 22-3/4” x 24-5/8” 48 LBS.
DIR-2020 20-1/4” x 20-1/4” 25-5/8” x 25-5/8” 21-3/4” x 24-5/8” 47 LBS.
DIR: DROP-IN RACK/DISPENSER
03/09-SC
/
