**ASSEMBLY INSTRUCTIONS ***
***Carmela Canopy Full & Twin beds**
****MINIMUM AGE FOR USING THIS PRODUCT
SHOULD NOT BE
LESS THAN 36 MONTHS***
Hardware and components included:
1 TOOL
4 WOODEN FINIALS
4 WOODEN FEET
4 WOODEN SLATS
2 SHORT CANOPY RAILS
2 LONG CANOPY RAILS
2 SHORT TURNED POSTS
2 LONG TURNED POSTS
Assembling:
UNSCREW THE METAL PEG FROM THE METAL CAMLOCK ON THE RAILS (IMG. A-B)
SCREW THE 4 METAL PEGS ON HEADBOAD AND FOOTBOARD (IMG. C)
INSTALL THE 4 WOODEN FEET (IMG. D-E)
INSTALL THE RAIL BY INSERTING IT ON THE METAL PEG ALREADY INSTALLED ON THE
FOOTBOARD AND HEADBOARD. INSTALL ONE SIDE AT TIME (HEADBARD OR FOOTBOARD) AND
SECURE WITH THE TOOL (IMG. F-G-H-I)
INSTALL THE SHORT TURNED POSTSON HEADBOARD AND LONG TURNED POSTS ON FOOTOARD
(IMG. L-M)
PLACE THE LONGEST CANOPY RAILS ON TOP OF THE TURNED POSTS AND THEN THE SHORTEST
CANOPY RAILS AND SECURE BY SCREWING THE WOODEN FINIALS (IMG. N-O-P-Q)
INSTALL THE 4 WOODEN SLATS (IMG.R)
Img. A Img. B Img. C Img. D
Img . E Img. F Img. G
Img . H Img . I Img. L Img. M
Img . N Img . O Img . P Img . Q
Img . R
/
