Pelco DVR DX8116 User manual

Tech

Tips

Helpful Tips for Pelco Products

World Headquarters

3500 Pelco Way, Clovis, California 93612 USA

USA & Canada Tel: 800/289-9100 Fax: 800/289-9150

International Tel: 1-559/292-1981 Fax: 1-559/348-1120

www.pelco.com

Pelco and the Pelco logo are registered trademarks of Pelco.

Information subject to change without notice.

Page 1 of 1 DX8100_DX9200HDD1.fm

DX8100 DVR

DX9200HDDI SUPPORT LIMITATIONS

October 23, 2006

DX9200HDDI WORKS WITH DX8108 AND DX8116

There has been confusion recently as to whether the DX9200HDDI is compatible with the DX8100.

A SCSI card recently qualified that works with the DX8100 and DX9200HDDI, however, due to hard-

ware limitations the card only works with the DX8108 and DX8116 units.

NOTE: The DX9200HDDI does not work with the DX8124 and DX8132 because these units

do not have a viable slot available for the SCSI card.

To connect the DX9200HDDI to the DX8100 do the following:

1. Install the optional DX8100-ISCI internal SCSI interface card in slot 2.

2. Move the main Capture card to slot 3.

This procedure will be covered in detail in the DX8100-ISCI Installation manual.

This manual is also suitable for

Download PDF