LG MP500-FJBAP Owner's manual

Type
Owner's manual
DIGITAL
SIGNAGE
MEDIA
PLAYER
(Hardware)
OWNER’S MANUAL
Please read this manual carefully before operating
the product and retain it for future reference.
http://partner.lge.com
www.lg.com
MP500-A***
MP500-B***
MP500-F***
2
TABLE OF CONTENTS
Licenses .....................................................................................4
Replacing Flash Memory Battery ...............................................4
MP500-A*** / MP500-B***
Specications .............................................................................5
General Specifications .................................................................................................. 5
Multi I/O Port ................................................................................................................. 5
Operational Specifications ............................................................................................ 6
Included in the Box .....................................................................7
Basic Components ........................................................................................................ 7
Optional Items ............................................................................................................... 7
Connections ...............................................................................8
Front Panel .................................................................................................................... 8
Back Panel .................................................................................................................... 8
How to Install on Monitor ............................................................9
**WS50, **LT55A Models .............................................................................................. 9
**WX50MF Model ........................................................................................................ 10
How to Install the Guide Bracket ..............................................11
In/Out Cable Connection ..........................................................13
Connecting a Monitor with an HDMI Cable ................................................................. 14
Connecting/Disconnecting HDMI Audio Device in Windows ....................................... 16
Connecting a Monitor with DP Cable .......................................................................... 17
Connection to Multiple Monitors .................................................................................. 20
3
MP500-F***
Specications ...........................................................................22
General Specifications ................................................................................................ 22
Multi I/O Port ............................................................................................................... 22
Operational Specifications .......................................................................................... 23
Included in the Box ...................................................................24
Basic Components ...................................................................................................... 24
Optional Items ............................................................................................................. 25
Connections .............................................................................26
Front Panel .................................................................................................................. 26
Back Panel .................................................................................................................. 26
How to Install on Monitor ..........................................................27
**WS50, **LT55A Models ............................................................................................ 27
**WX50MF Model ........................................................................................................ 28
How to Install the Guide Bracket ..............................................29
In/Out Cable Connection ..........................................................31
Connecting a Monitor with DP Cable .......................................................................... 32
Connecting a Monitor with DP to HDMI Adapter ......................................................... 35
Connecting/Disconnecting DP Audio Device in Windows ........................................... 38
Connection to Multiple Monitors .................................................................................. 39
Limitations of Microsoft Windows Embedded Standard ...........41
Frequently Asked Questions (FAQs) ........................................41
Unied Codecs .........................................................................42
Network Setting ........................................................................42
Attention
● LG Electronics does not guarantee the service of the OS not included in the purchase of the product.
4
Licenses
Supported licenses may differ by model. For more information of the licenses,
visit
www.lg.com
.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
When you change the flash memory battery, it is recommended that you seek assistance from the LG
Electronics Service Center.
● Using a non-standard battery may cause a malfunction.
● If a malfunction is caused by trying to replace a part on your own, servicing will be charged.
If the product is not connected to the AC power for an extended period of time, the flash memory battery
may be discharged. In this case, servicing will be charged.
When the battery is discharged, the message below will appear on the boot screen. In this case, you should
replace the battery.
=> ERROR
0271: Check data and time settings
WARNING
0251: System CMOS checksum bad - Default configuration used
Press <F1> to resume, <F2> to Setup
Attention
Replacing Flash Memory Battery
The ash memory battery helps maintain the system (BIOS) settings when the computer is powered off.
The ash memory battery is a consumable part.
● It may differ depending on the product.
Note
Flash Memory Battery
5
Attention
Product specifications may change without prior notice to improve performance.
Specications
Dimensions 260 mm (W) x 40.1 mm (H) x 275.9 mm (D) (only Set)
Weight 2.08 Kg (only Set)
CPU
Intel
®
Celeron™ Processor P4500 (2M Cache, 1.86 GHz)
Intel
®
Core™ i5-520M Processor (3M Cache, 2.40 GHz)
Chip Set Mobile Intel
®
QM57 Express Chipset
Main Memory DDR3 SODIMM type 2 GB
Secondary Storage
Device
SSD 64 GB, 128 GB
O/S
Microsoft
®
Windows
®
Embedded Standard 7 P
Embedded battery Applied
General Specifications
Multi I/O Port
Serial Port One external RS-232C Serial port
USB Port Hi-Speed USB 2.0 port 480 Mbps rate (x4)
LAN Port Intel
®
82577 Gigabit Ethernet PHY
HDMI / DP Intel
®
HD Graphics Controller
Mini PCIe Supported
LINE OUT Supported
MP500-A*** / MP500-B***
6
Operational Specifications
● The resolution which is supported may differ depending on the monitors.
Booting the Media Player using a device connected via a USB port may not work properly, depending on the
device.
Note
Resolution
Maximum Resolution
DP: 2560 x 1600 60 Hz
HDMI: 1920 x 1200 60 Hz
Recommended
Resolution
1920 x 1080 60 Hz
Power Power Rating 100-240 V~ 50/60 Hz 1.3 A
Operating Condition
Video LED Sync (H/V)
Max Mode Active On ≤ 50 W
Deep Sleep Mode
(Set = Off)
Off Off ≤ 1 W
Environmental Conditions
Operating Conditions 5
°c
to 40
°c
Humidity 10 % to 80 %
Storage Conditions -20
°c
to 60
°c
Humidity 5 % to 85 %
7
Included in the Box
The MP500 with the following components. Please check that these components have been included prior
to installation.
The following items are supported by the MP500, but are not provided with the product.
Please purchase optional items as needed.
● HDMI cable, DP cable, LINE-OUT cable, LAN cable, mouse, keyboard.
Basic Components
Optional Items
SuperSign software and manual.
- Downloading from the LG Electronics website.
- Visit the LG Electronics website (http://partner.lge.com) and download the latest software for your model.
(Depending on the model, this feature may not be supported.)
Note
MP500
Owner's Manual
/ Cards
Power Cable
< Basic Components >
< Optional Components >
Φ3 L12 x 4 EA (Fixing
screws for plastic back cover)
M3 L8 x 4 EA (Fixing screws
for metal back cover)
Guide Bracket
These illustrations may differ from your product and are subject to change.
In some countries, a Y-type cable may be provided instead of the power cord.
Always use genuine components to ensure safety and product life. Any damages or injuries by misuse or
using an improper accessory are not covered by the warranty.
The guide bracket may not be provided depending on your region or model.
Attention
M3 L6 x 4 EA
(Fixing screws)
8
Connections
Back Panel
A
B
C
GE
F
H
E
D
Number Connection Description
Power Cable In For the power cable.
RS-232C Out For the RS-232C cable.
Power Button Turns MP500 on.
LINE-OUT Connector For a LINE-OUT cable for analog audio transfer.
USB In
For USB-type devices, including memory, hard disk, CD-ROM, key-
board, and mouse.
HDMI Out For an HDMI-compatible monitor.
LAN Connector For a LAN cable.
DP Output Port Connects the cable to the DP-supporting monitor.
Monitor Docking Port Connects the MP500 to a monitor.
A
B
C
D
E
F
G
H
I
Front Panel
I
9
We recommend you to use the items provided with your MP500 and follow our instructions for integrating
the product with your monitor in order to ensure the correct results.
1
Place a soft cloth on the table and put the
product with the screen facing downward.
Push the MP500 into the compartment to
mount it.
2
Attach the MP500 on the set using the four
screws provided.
How to Install on Monitor
**WS50, **LT55A Models
Be careful of sharp edges on the rail and the
handle.
Fixing the product with non-standard screws
may cause damage or the product to fall down.
LG Electronics is not liable for any accidents
relating to the use of non-standard screws.
Do not over tighten the screws as this may
cause damage to the product and void your
warranty.
Attention
The illustrations shown are to guide your integration and may differ from your product.
Attention
10
For proper use, it is recommended to use the basic components provided with the MP500 to attach it to a
monitor.
1
Place a soft cloth on the table and put the
product with the screen facing downward.
Remove the opening cover by unfastening two
screws as shown in the picture.
2
Push the MP500 into the compartment to
mount it.
3
Attach the MP500 on the product using the
two screws provided.
**WX50MF Model
The illustrations shown are to guide your integration and may differ from your product.
Attention
Be careful of sharp edges on the rail and the
handle.
Attaching the product with non-standard
screws may cause damage or the product to
fall down. LG Electronics is not liable for any
accidents relating to the use of non-standard
screws.
Do not over tighten the screws as this may
cause damage to the product and void your
warranty.
Attention
11
How to Install the Guide Bracket
1
2
1
2
1
2
1
2
1
2
1
Make sure to match the numbers carved on the
guide bracket and the numbers on the back cover
when assembling the guide bracket.
2
Attach the guide bracket to the back of your moni-
tor. (3 or 4 screws are required depending on the
model.)
<Model that requires 3 xing screws for assembling
the guide bracket>
<Model that requires 4 xing screws for assembling
the guide bracket>
12
<Model that requires 3 xing screws for assembling
the guide bracket>
<Model that requires 4 xing screws for assembling
the guide bracket>
3
Assemble the MP500-A/B*** to the guide bracket
with the xing screws.
<Model that requires 3 xing screws for assembling
the guide bracket>
Attach the MP500-A/B*** to the guide bracket with 3
xing screws.
<Model that requires 4 xing screws for assembling
the guide bracket>
Attach the MP500-A/B*** to the guide bracket with 4
xing screws.
13
In/Out Cable Connection
To view images on the monitor that is not connected to the monitor docking port of MP500, you need to con-
nect the MP500 to the monitor via an HDMI or DP cable.
HDMI, DP, LINE-OUT, and LAN cables are not included in the basic components. You need to purchase a
cable separately as it is not provided as an accessory.
After cabling is complete, assign the SET ID of the monitor to be connected to MP500.
● To configure the SET ID, please refer to the owner’s manual for your monitor.
Attention
When using the SuperSign Manager software:
The monitor's SET ID is a unique number used to identify the monitor. You can choose a number from 1
to 25. The SET ID allows the SuperSign Manager software to identify the monitor.
In order to directly connect the monitor to the MP500, its SET ID must be set to 1.
To use SuperSign Manager, the monitor that will be connected to a MP500 must support the LG RS-232C
protocol. A monitor supporting the LG RS-232C protocol can be controlled the monitor functions, such as
brightness and sound, using SuperSign Manager.
Note
14
2 Connect MP500 to a monitor with an HDMI cable.
1
Connect the appropriate power cables to a monitor and MP500 respectively.
Connecting a Monitor with an HDMI Cable
HDMI connections allow digital video and audio signals to be transferred with one cable.
HDMI cable connections do not require an additional audio in cable.
● The monitor to connect with MP500 should have the HDMI in for the HDMI connection.
To use an HDMI device, connection should be done on the Windows, the operating system of MP500. To
connect and disconnect the HDMI audio device, see the Connecting/Disconnecting HDMI Audio Device in
Windows section of this document.
Attention
Note
Use a certied cable with the HDMI logo attached. If you do not use a certied HDMI cable, the screen
may not display or a connection error may occur.
Recommended HDMI cable types
-High-Speed HDMI
®
/™ Cable
-High-Speed HDMI
®
/™ Cable with Ethernet
15
4 Connect a LAN cable to MP500.
3 Connect MP500 (OUT) to the monitor (IN) with an RS-232C cable.
16
1
Click the button in the lower left of the screen.
2 Select Start > Control Panel > Sounds and Audio Devices > Audio.
3 Select Play Sounds > Intel(R) Display Audio Output 1 from the list and click OK.
1
Click the button in the lower left of the screen.
2 Select Start > Control Panel > Sounds and Audio Devices > Audio.
3 Select Play Sounds > Realtek HD Audio output from the list and click OK.
1 Select Start > Control Panel > Hardware and Sound > Sound.
2
Click the Play tap rst. Right-click on the HDMI device or speakers you want and select Set as Default
Device then click OK to connect the HDMI audio device or select Disabl
e to disconnect it.
In order to change the audio devices, you may restart the computer.
Connecting/Disconnecting HDMI Audio Device in Windows
Connecting HDMI Audio Device
Disconnecting HDMI Audio Device
Connecting/Disconnecting HDMI Audio Device in Windows Embedded Standard 7 P
Move to the desktop of the monitor connected to the MP500.
Move to the desktop of the monitor connected to the MP500.
Attention
If an audio device is connected or removed while media content is played, you need to stop the content
and play again.
If an HDMI cable is removed from the MP500, sound does not play. In addition, when the cable is
reconnected, it may take time before sound plays again.
17
Connecting a Monitor with DP Cable
2 Connect
MP500
to the monitor via a DP cable.
1
Connect the appropriate power cables to a monitor and MP500 respectively.
To enable DP connection, the monitor that will be connected to MP500 must support the DP input port.
When connecting the DP (DisplayPort) cable, use the standard cable. Using a non-standard cable may
cause a malfunction.
Attention
18
4 Connect the
MP500
to the monitor with a LINE-OUT cable.
3 Connect
MP500
to the monitor (IN) with an RS-232C cable.
AUDIO
IN
AUDIO
IN
AUDIO
IN
19
5 Connect a LAN cable to
MP500.
Attention
MP500 prioritizes video output in the following order: DP HDMI. If you connect multiple cables
simultaneously and turn the product on, video output is prioritized accordingly.
When the product is turned on after cable connection or the operating system is completely
booted, DP and HDMI video output start operating.
The product does not support a dual mode where DP can be switched either to HDMI or DVI.
It is only for DP output.
The DisplayPort (DP) of the MP500 does not support digital audio output. It is recommended to use
it with a line-out cable for analog audio output.
20
Connection to Multiple Monitors
1 Connect the RS-232C Out port of the MP500 to the RS-232C In port of the rst monitor (SET ID 1).
2 Connect rest of the monitors using a RS-232C cable. (Be careful about input and output ports.)
Multiple monitors can be connected to a single MP500. (The maximum number of monitors connected varies
depending on the monitor type.) You can set the tile mode by connecting multiple monitors.
Attention
● You may want to purchase additional RS-232C cables to use several monitors together.
● You cannot connect multiple monitors using an HDMI cable or DP cable.
● Refer to the owner's manual of the monitor for the SET ID Max. value.
MP500
RS-232C Cable
( SET ID Max )
MP500
RS-232C Cable
( SET ID Max )
**WS50, **LT55A
**WX50MF
RS-232C Cable
RS-232C Cable
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

LG MP500-FJBAP Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI