Moen 3362 Specification

Hello! I am an AI chatbot trained to assist you with the Moen 3362 Specification. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

Specifications

DESCRIPTION

• Three function transfer valve

• Inlets and outlets on same plane

• 1/2" CC connections

OPERATION

• Detents at each ow position

• Valve operates 3 independent functions but can be plumbed for

2 independent functions

CARTRIDGE

• Ceramic disk cartridge

STANDARDS

• Third party certied to meet ASME A112.18/CSA B125.1 and all

applicable requirements therein

• Meets ADA compliance standards

WARRANTY

• Lifetime limited warranty against leaks, drips and nish defects

to the original homeowner

• 10 year limited warranty when used in a multifamily installation

• 5 year limited warranty when used in a commercial installation

Visit www.moen.com/support for complete details and limitations

NOTE

This valve is not intended to be used as a shut-o valve. To prevent

the potential of cross ow, check valves must be integral to the

supply valve or installed in both hot and cold water supply lines.

Three Independent Function

Transfer Valve

Model: 3362

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

CRITICAL DIMENSIONS

(DO NOT SCALE)

Rev. 2/18

FINISHED

WALL LINE

3-16" - 2"

2-3/4" (69mm)

Min.

3" (76mm)

Min. Wall

Cavity

2-3/4"

(69mm)

Platerguard

Opening