MOEN SPECIFIER SERVICES 1-800-321-8809 Ext. 2158
www.moen.com
CRITIC
AL DIMENSIONS
(DO NOT SCALE)
Specifications
COMMERCIAL
CRITIC
AL DIMENSIONS
(DO NOT SCALE)
CRITIC
AL DIMENSIONS
(DO NOT SCALE)
ADA
Rev. 11/06
NOTE: This valve is not intended to be used as a shut-off valve. To prevent the potential of cross flow, check valves must be integral to the supply valve or installed in both hot and cold water supply lines.
36"
(912mm)
12"
(305mm)
FLOOR LINE
ESCUTCHEON
HANDLE
DIRECTION
OF HANDLE
ROTATION
6-3/4"
(171mm)
L
C
3" (76mm)
MIN. WALL
CAVITY
6'-6"
(1981mm)
NOMINAL
7" (178mm)
ESC. DIAM.
4-1/2” (114mm)
PLASTER GUARD
OPENING
2 1/2" MAX.
(63mm)
1/2" MIN. CC (13mm)
5/8" MIN. IPS (16mm)
FINISHED
WALL LINE
3-16" - 2"
H
C
F
O
3-7/16"
(87mm)
2-3/4"
(69mm) Min.
3"
(76mm)
Min.
Wall
Cavity
2-3/4"
(69mm)
Platerguard
Opening
5"
(127mm)
Esc.
Diameter
Vacuum
Breaker
28-1/2"
NOMIMAL
(723mm)
FLOOR LINE
6'-6" (1981mm)
NOMINAL
DROP ELL
TUB RIM
FINISHED
WALL LINE
1/2-14 NPT
1/2-14
NPSL
THREAD
2" Dia.
3-3/16"SPRAY
HEAD
DIAMETER
9"SPRAY WAND
HEIGHT
DESCRIPTION
• Chrome plated metal construction
• Pressure balancing cycle valve design with 1/4 turn stops
• 3 function transfer valve
• 1/2” CC connections
• Contains: stationary showerhead, hand-held shower,
69" metal hose, 30" slide bar, drop ell and vacuum breaker.
Slide bar is NOT DESIGNED TO BE A GRAB BAR.
• Applicable components are supplied with vandal
resistant screws
OPERATION
• Temperature and transfer valves both have ADA
compliant lever style handles
• Temperature handle operates counterclockwise
through a 270° arc with off at 6 o’clock, and the
maximum hot at the 9 o’clock position
• Adjustable temperature limit stop
• Pressure balancing mechanism maintains selected
discharge temperature to ± 2°
• Transfer valve operates 3 distinct functions
FLOW
• 2.5 gpm (9.5L/min) hand-held shower and
stationary shower head
CARTRIDGE
• 1222 cartridge design in temperature control valve
accommodates back to back installations
• Ceramic disc cartridge in transfer valve
Three-Function
Commercial Shower System
Model: 8342
STANDARDS
• Designed and manufactured to meet CSA
B-125 and ASME A112.18.1M and all
applicable specifications referenced therein
and complies with applicable requirements
of ANSI A117.1
WARRANTY
• Warranted for 5 years against material or
manufacturing defects
/