Specifications
DESCRIPTION
• Three function transfer valve
• Inlets and outlets on same plane
• 1/2" CC connections
OPERATION
• Detents at each ow position
• Valve operates 3 independent functions but can be plumbed for
2 independent functions
CARTRIDGE
• Ceramic disk cartridge
STANDARDS
• Third party certied to meet ASME A112.18/CSA B125.1 and all
applicable requirements therein
• Meets ADA compliance standards
WARRANTY
• Lifetime limited warranty against leaks, drips and nish defects
to the original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
NOTE
This valve is not intended to be used as a shut-o valve. To prevent
the potential of cross ow, check valves must be integral to the
supply valve or installed in both hot and cold water supply lines.
Three Independent Function
Transfer Valve
Model: 3362
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 2/18
FINISHED
WALL LINE
3-16" - 2"
2-3/4" (69mm)
Min.
3" (76mm)
Min. Wall
Cavity
2-3/4"
(69mm)
Platerguard
Opening
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI