Asus c8741 User manual

用戶手冊

C8741

ASUS Miracast Dongle

Page is loading ...

華碩 Miracast Dongle 用戶手冊

8

使用 ASUS Miracast Dongle

連接具備 HDMI 功能的顯示設備

說明：以下圖標僅供參考，請以實際使用的設備為準。

1. 請將 micro USB 充電線 micro USB 端口連接 ASUS Miracast

Dongle。

Page is loading ...

華碩 Miracast Dongle 用戶手冊

10

3. 請將 ASUS Miracast Dongle 的 HDMI 連接端口連接外接顯示設

備。

說明：請依 ASUS Miracast Dongle 的電力來源，參考下圖的說明完

成設置。

ASUS Miracast Dongle 連接至插頭及外接顯示設備的 HDMI 連接端口

ASUS Miracast Dongle 連接至外接顯示設備的 USB 端口及 HDMI 連接

端口

Page is loading ...

華碩 Miracast Dongle 用戶手冊

12

與 ASUS 移動設備連接

1. 請確認 ASUS Miracast Dongle 的 HDMI 連接端口已確實連接外接

顯示設備。

2. 當 ASUS Miracast Dongle 連接成功時，顯示設備上會出現以下畫

面。

3. 請向下滑動移動設備的畫面，開啟 ASUS 快速設置面板。

說明：以下步驟適用於支持 ASUS Miracast 的 ASUS 移動設備。

Page is loading ...

華碩 Miracast Dongle 用戶手冊

17

通過筆記本電腦進行固件更新

1. 請確認 ASUS Miracast Dongle 已連接至外接顯示設備。

2. 由華碩技術支持網站或是產品頁面 http://www.asus.com/Tablet_

Mobile_Accessories/ 下載固件更新文件。

3. 將下載文件以 .sbin 的文件格式解壓縮。

4. 長按 ASUS Miracast Dongle 上的重置按鈕 5 秒後放開，LED 指

示燈會亮起紅燈，表示 ASUS Miracast Dongle 正在準備進行固件

更新。

5. 以筆記本電腦連接外接顯示設備的 SSID。

6. 開啟瀏覽器並連接至 http://192.168.8.1。

7. 點擊 Browse 並選擇已下載的固件更新文件(.sbin)，點擊 Upload。

Page is loading ...

華碩 Miracast Dongle 用戶手冊

20

Conformity Statements

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modications not expressly approved by the

party responsible for compliance could void the user’s authority to operate this

equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

This device and its antenna(s) must not be co-located or operating in conjunction

with any other antenna or transmitter.

This device is restricted to indoor use when operated in the 5.15 to 5.25 GHz

frequency range.

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not

cause interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of the device

華碩 Miracast Dongle 用戶手冊

21

RF exposure warning

This equipment must be installed and operated in accordance with provided

instructions and the antenna(s) used for this transmitter must be installed to

provide a separation distance of at least 20 cm from all persons and must not be

co-located or operating in conjunction with any other antenna or transmitter.

End-users and installers must be provide with antenna installation instructions

and transmitter operating conditions for satisfying RF exposure compliance.

This device is restricted to indoor use when operated in the 5.15 to 5.25 GHz

frequency range.

This device is slave equipment, the device is not radar detection and not ad-hoc

operation in the DFS band.

Canada, Industry Canada (IC) Notices

This Class B digital apparatus complies with Canadian ICES-003 and RSS-210.

Operation is subject to the following two conditions: (1) this device may not

cause interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of the device.

Canada, avis d’Industry Canada (IC)

Cet appareil numérique de classe B est conforme aux normes canadiennes

ICES-003 et RSS-210.

Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne

doit pas causer d’interférence et (2) cet appareil doit accepter toute interférence,

notamment les interférences qui peuvent aecter son fonctionnement.

Radio Frequency (RF) Exposure Information

The radiated output power of the Wireless Device is below the Industry Canada

(IC) radio frequency exposure limits. The Wireless Device should be used in such

a manner such that the potential for human contact during normal operation is

minimized.

This device has also been evaluated and shown compliant with the IC RF Exposure

limits under mobile exposure conditions. (antennas are greater than 20cm from a

person’s body).

Page is loading ...

Asus c8741 User manual

Asus c8741 User manual

in other languages

Related papers

Other documents