Pyle PL71PHB User manual

Category
Remote controls
Type
User manual
PL71PHB
HTTP://WWW.PYLEAUDIO.COM
PL71PH B
V1/V 2
PL71 PHB
V1/ V2
1
2
4.
75 T
o 7.
5
It is pleased that you use the LCD products. To ensure a long term life of the product
and your complete use in the product, you shall read the instruction carefully and
save it in good condition for demand in the future.
APPEARANCE AND FUNCTION
You may adjust the stainless steel by adjusting the
tube until the headrest indicator can fit on the back seat (Maximum
adjustment width is 7CM)
V1/ V2
1
2
3
4
5
6
7
8
9
10
11
12
1.Wireless Headphone Transmitter
2.Audio out(headphones)
3.Audio/video in
4.Color LCD Screen
5.V1/V2 (Video1,Video2)
6.Reduce Button
7.Menu(brightness.
Color.contrast)buttons
8.Increase Button
9.Power on/off
10.Remote controller receiver
11.Power indicator light
12.Removable tube spacer
13.Monitor Connector
13
14
15
16
17
18
20
21
22
23
19
PL7 1PHB
ATTENTION
To receive the IR signal for the
wireless headphone, please use
A channel (right 2.3 MHz,
left 2.8MHz) on the monitor.
14 AV1 Audio right input
AV1 Audio left input
AV1 Video input
17 AV2 Audio right input
AV2 Audio left input
AV2 Video input
Video output
21 Audio left output
22 Audio right output
23 12V power input
.
15.
16.
.
18.
19.
20.
.
.
.
V1/ V2
1
2
3
4
5
6
7
8
9
10
11
1.Audio out(headphones)
2.Audio/video in
3.Color LCD Screen
4.V1/V2 (Video1,Video2)
5.Reduce Button
6.Menu(brightness.
Color.contrast)buttons
7.Increase Button
8.Power on/off
9.Remote controller receiver
10.Power indicator light
11.Removable tube spacer
12.Monitor Connector
12
13
14
15
16
17
19
20
21
22
18
PL7 1PHB
13 AV1 Audio right input
AV1 Audio left input
AV1 Video input
16 AV2 Audio right input
AV2 Audio left input
AV2 Video input
Video output
20 Audio left output
21 Audio right output
22 12V power input
.
14.
15.
.
17.
18.
19.
.
.
.
3
4
AV Display Mode:
Operating method: Press the buttonAV1/AV2” on the remote
control unit to choose AV display mode. If the VCD or DVD
signal is connected, there should be display normally pictures
signal ;If the VCD or DVD signal isn't connected, AV character
should be appear top the left corner and the screen is blue..
the system will display “NO SIGNAL.
1. BRIGHTNESS
2.
3.
4. TINT(only NTSC system)
5.
. SCALING(16: 9/ 4:3)
COLOR
CONTRAST
LANGUAGE
6
The above functions can be executed by MENU on the display
or remote control unit.
1. Brightness: Press the MENU button on the display or MENU on
the remote control unit, then press: “ ” “ ” button on the
display or “ ” keys on the remote control unit to choose
what you need.
2. COLOR: Press the MENU button on the display or MENU on the
remote control unit thrice , then press: “ ” “ ” button on the
display or “ ” “ ” keys on the remote control unit to choose
what you need.
3. Contrast Ratio: Press the MENU button on the display or MENU
on the remote control unit twice, then press: “ ” “ ” button on
the display or “ ” “ ” keys on the remote control unit to choose what
you need.
4. TINTPress the MENU button on the display or MENU on the
remote control unit four times , then press: “ ” “ ” button on
the display or “ ” “ ” keys on the remote control unit to
choose what you need0
5
.
6. scaling: Press the MENU button on the display five times , then
press: “ ” “ ” button on the display to choose .
“ ”“ ”
Language : please press the manual of unit or the remote control six
times, then press on the unit or   on the remote
control to select you need.
Remote Control
5
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Pyle PL71PHB User manual

Category
Remote controls
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI