Samsung HP-R8082 User manual

Owner’s Instructions

HP-R8082

This device is a Class A digital apparatus.

Register your product at www.samsung.com/global/register

Important Warranty Information

Regarding Monitor Format Viewing

2

Wide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily

designed to view wide screen format full-motion video. The images displayed on them should primarily

be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature

and the images are constantly moving. Displaying stationary graphics and images on screen, such as

the dark side-bars on nonexpanded standard format television video and programming, should be

limited to no more than 5% of the total television viewing per week.

Additionally, viewing other stationary images and text such as stock market reports, video game

displays, station logos, web sites or computer graphics and patterns, should be limited as described

above for all televisions. Displaying stationary images that exceed the above guidelines

can cause uneven aging of PDP Displays that leave subtle, but permanent burned-in

ghost images in the PDP picture. To avoid this, vary the programming and images,

and primarily display full screen moving images, not stationary patterns or dark

bars.

On PDP models that offer picture sizing features, use these controls to view different formats as a full

screen picture.

Be careful in the selection and duration of monitor formats used for viewing. Uneven PDP aging as a

result of format selection and use, as well as burned-in images, are not covered by your Samsung

limited warranty.

BN68-00852B-00Eng(002~025) 11/22/05 1:45 PM Page 2

Product Features

The World’s Best 80" PLASMA!! -Ultra Wide Screen Movie Theater 80" PLASMA PDP Monitor

With the ultra wide screen PDP Monitor, you can experience the quality of a movie theater.

High-Quality Picture with SRS TruSurround XT Sound

You can watch distortion-free pictures on a wide screen providing a 160° viewing angle.

SRS TruSurround XT enables you to enjoy virtual Dolby-Surround sound.

Progressive Scan enables you to watch DVDs at the highest quality.

Various Functions for More Convenient TV Viewing

Auto Volume Control removes the necessity of changing the volume whenever you change channels.

You can change the aspect ratio to 4:3 (Normal) for watching TV or to 16:9 (Wide) for watching

movies depending on your needs.

Play Videos from your PC

The TV supports VESA Plug & Play and is automatically recognized when connected to a PC.

You can watch and listen to video from your PC by connecting the TV using a PC Video cable

(supplied with the product) and an audio cable (optional).

DNIe for Sharper Images

DNIe provides fine and sharp images on the TV.

My Color Adjustment

You can adjust individual colors without affecting other colors on the PDP Monitor screen.

Power-Saving Mode

Power consumption is minimized by controlling the brightness depending on the surrounding

luminance.

Color-Weakness Enhancement

Red, Blue or Green can be adjusted to compensate for your particular color vision weakness.

After-Image Prevention Function

The After-Image Prevention Function prevents after-images from being formed after a still image is

displayed on the screen for a long period of time.

Additionally, a function is built-in that diminishes or removes any after-images.

3

BN68-00852B-00Eng(002~025) 11/22/05 1:45 PM Page 3

4

User Instructions

Screen Image retention

Do not display a still image (such as on a video game or when hooking up a PC to this PDP

Monitor) on the plasma monitor panel for more than 2 hours as it can cause screen image retention.

This image retention is also known as “screen burn”. To avoid such image retention, reduce the

degree of brightness and contrast of the screen when displaying a still image.

Height

The PDP Monitor can only operate normally at heights under 6500ft.

Heat on the top of the PDP Monitor

The top side of the product may be hot after long periods of use as heat dissipates from the panel

through the vent hole in the upper part of the product.

This is normal and does not indicate any defect or operation failure of the product.

However, children should be prevented from touching the upper part of the product.

The product is making a ‘cracking’ noise.

A ‘cracking’ noise may occur when the product contracts or expands due to a change of

surrounding environment such as temperature or humidity. This is normal and not a defect of the

unit.

Cell Defects

The PDP Monitor uses a panel consisting of 1,230,000(SD-level) to 3,150,000(HD-level) pixels

which require sophisticated technology to produce. However, there may be a few bright or dark

pixels on the screen. These pixels will have no impact on the performance of the product.

Avoid operating the PDP Monitor at temperatures below 5°C (41°F)

A still image displayed too long may cause permanent damage to the PDP Monitor Panel

Watching the PDP Monitor in 4:3 format for a long period of time may leave

traces of borders displayed on the left, right and center of the screen caused

by the difference of light emission on the screen.

Playing a DVD or a game console may cause similar effect to the screen.

Damage caused by the above effect are not covered by the Warranty.

Afterimage on the Screen.

Displaying still images from Video games and PC for longer than a certain period of time may

produce partial after-images.

To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images for a

long time.

Warranty

- Warranty does not cover any damage caused by image retention.

- Burn-in is not covered by the warranty.

BN68-00852B-00Eng(002~025) 11/22/05 1:45 PM Page 4

General Information

Your New Plasma Display Panel......................8

Remote Control Buttons ................................11

Wall Installation Instructions..........................13

Connections

Connecting a VCR ......................................16

Connecting a Camcorder ............................17

Connecting a DVD Player (480i, 480p) ........18

Connecting a DTV Receiver (480p, 720p,

1080i) ......................................................19

Connecting a Digital Set-Top Box (480p, 720p,

1080i) ......................................................20

Connecting a Digital Audio System ..............22

Connecting to an Analog Amplifier ..............23

Connecting to a Subwoofer Speaker ............24

Operation

Turning the PDP Monitor On and Off ............26

Plug & Play Feature ....................................28

Setting Up Your Remote Control ....................30

Viewing an External Signal Source................32

Picture Control

Changing the Picture Standard ....................36

Customizing the Picture Settings ....................37

Viewing the DNIe Demonstration ..................39

Changing the Screen Size ............................40

Viewing the Picture-in-Picture.........................42

Setting the My Color Control Mode ...............48

Setting the Film Mode ..................................51

Sound Control

Customizing the Sound ..............................54

Using Automatic Sound Settings ...................55

Setting the TruSurround XT............................56

Setting up DNSe (Digital Natural Sound engine) ..

57

Using the Auto Volume ................................58

Setting the On/Off Melody ..........................59

Selecting the Internal Mute ..........................60

Setting up the Sub Woofer Output ................61

Connecting a PC and Operation

Connecting a PC ........................................64

Changing the Position of the Image ..............68

Picture Quality Adjustment............................69

Image Reset ................................................72

Time Setting

Setting the Clock ........................................74

Setting the Sleep Timer ................................75

Setting the On/Off Timer..............................76

Function Description

Selecting a Menu Language ........................78

Digital Noise Reduction................................79

Setting the Blue Screen ................................80

Using the Color Weakness Enhancement

Option ......................................................81

Using the Energy Saving Feature ..................82

Preventing Screen Burn-in ............................83

Reducing the Effects of Screen Burn ..............84

Before using the Multiple Display Control

function ......................................................85

Setting the MDC (Multiple Display Control) ....86

Appendix

Troubleshooting ..........................................88

Care and Maintenance ................................89

Specifications..............................................90

5

Table of Contents

Note

• The information contained in these Owner’s

Instructions is subject to change without prior

notice for improvement, and may vary

depending on the version of the PDP Monitor’s

software and the regional conditions.

BN68-00852B-00Eng(002~025) 11/22/05 1:45 PM Page 5

BN68-00852B-00Eng(002~025) 11/22/05 1:45 PM Page 6

PLASMA DISPLAY PANEL

General Information

Your New Plasma Display Panel ......................................................8

Remote Control Buttons ................................................................11

Wall Installation Instructions ..........................................................13

BN68-00852B-00Eng(002~025) 11/22/05 1:45 PM Page 7

8

Your New Plasma Display Panel

Front Panel

Œ SOURCE button

Press to display all of the available video

sources (AV1, AV2, S-Video1, S-Video2,

Component1, Component2, PC, DVI and HDMI).

´ MENU button

Displays the main on-screen menu.

ˇ VOL +,

-

buttons

Press to increase or decrease the volume.

Also used to select or adjust items on the

on-screen menu.

¨ SEL ( , ) buttons

Used to move up or down in the on-screen

menus.

ˆ (Enter) button

Press to confirm a selection.

Ø Power button

Press to turn the PDP Monitor on and off.

Power indicator

- Power Off : Blue

- Power On : Off

∏ Remote Control Sensor

Aim the remote control towards this spot on

the PDP Monitor.

”

Illumination Sensor

The illumination sensor for the auto brightness

control function is located here.

’

Speaker

Œ´ ˇ ¨ ˆ

∏ ”

’

Ø

BN68-00852B-00Eng(002~025) 11/22/05 1:45 PM Page 8

9

Checking Accessories

Power Cord

(3903-000280)

Warranty Card

(AA68-00371C, 6801-001011)/

Registration Card

(AA68-40065B)/

Safety Guide Manual

(AA68-03242F)

(Not available in all locations)

Owner’s Instructions

(BN68-00825B)/

Addendum(Wall

Mount Installation)

(BN68-00749D)

Remote Control

(BN59-00496A)/

AAA Batteries

(4301-000103)

The following parts are sold separately and are available at most electronics stores.

Once you have unpacked your PDP Monitor, check to make sure that you have all the parts shown here.

If any piece is missing or broken, call your dealer.

Install CD

MDC Software

(RS-232C)

(BN59-00504A)

Component Cables (RCA)

(AA39-00033A)

Video/Audio Cable

(AA39-40001B)

S-VIDEO Cable

(AA39-40001B)

HDMI Cable

(BN39-00641A)

DVI Cable

(BN39-00246F)

PC Cable

(BN39-00115A)

PC Audio Cable

(AA39-00034B)

RS232C Cable

(AA39-00311A)

Side of the PDP Monitor

Audio Input (L, R)

Video Input

S-Video Input

Optical Cable

Coaxial Cable

Speaker Cables

(BN39-00530A)

Ferrite Cores

(3301-001110)

Ferrite Cores

The ferrite cores are used to shield the cables from

interference.

When connecting the S-Video 2, External IN2

(including Audio L/R), wind the cable around

the Ferrite Core once as shown in the figure to

the right.

When connecting the speaker cable, wind the

speaker cable around the Ferrite Core once as

shown in the following figure.

BN68-00852B-00Eng(002~025) 11/22/05 1:45 PM Page 9

10

Rear Panel

Œ POWER IN

Connect the supplied power cord.

´ HDMI IN

Connect to the HDMI jack of a device with

HDMI output.

ˇ DVI IN

-

DVI : Connect to the video output jack of a

device with DVI output.

-

AUDIO L/R : Connect to the audio output jack

of a device with DVI output.

¨ PC IN

Connect to the video output jack on your PC.

ˆ COMPONENT IN 1, 2

Video (Y/PB/PR) and audio (L-AUDIO-R)

component inputs.

Ø AV IN 1(VIDEO / AUDIO L/R)

Video and audio inputs for external devices,

such as a camcorder or VCR.

∏ S-VIDEO 1

Video input for external devices with an

S-Video output, such as a camcorder or VCR.

” SERVICE 1, 2

Connector for service only.

’ SUB WOOFER OUT

Connect to an active SUB-WOOFER.

˝ COAXIAL DIGITAL AUDIO OUT

Connect to a Digital Audio component.

Ô PC AUDIO IN

Connect to the audio output jack on your PC.

 AV OUT (VIDEO / AUDIO L/R)

Outputs for external devices.

Ò RS232C

- IN : Used for the MDC (Multiple Display

Control) function when connecting PC or

RS232C output of another PDP Monitor.

- OUT : Used for the MDC function when

connecting with RS232C input of

another PDP Monitor.

Ú OPTICAL DIGITAL AUDIO OUT

Connect to a Digital Audio component.

Æ EXT SPEAKER (8Ω)

Connect external speakers.

Notes

• Please be sure to match the color coded input terminals and cable jacks.

• For further details about connections, refer to pages 16-24.

• Whenever you connect an audio or video system to your television, ensure that all elements are

switched off. Refer to the documentation supplied with your equipment for detailed connection

instructions and associated safety precautions.

BN68-00852B-00Eng(002~025) 11/22/05 1:45 PM Page 10

11

Remote Control Buttons

Œ POWER button

Turns the PDP Monitor on and off.

´ ZOOM button

Press to magnify the screen.

ˇ STILL button

Press to pause the current screen.

¨ Number buttons

(This button is used to control the number buttons on a

Samsung Set-Top-Box)

ˆ +100 button

(This button is used to control the +100 button on a

Samsung Set-Top-Box)

Press to select channels over 100. For example, to select channel

121, press “+100”, then press “2” and “1.”

Ø MUTE button

Press to mute the PDP Monitor sound.

∏ VOL (Volume) buttons

Use it to adjust volume.

” TIMER button

Press to set the timer.

’ MENU button

Displays the main on-screen menu.

˝ ENTER button

Confirms a selection.

Ô P.MODE button

Adjust the PDP Monitor picture by selecting one of the preset factory

settings (or select your personal, customized picture settings).

 S.MODE button

Select Sound effect.

Ò LCD DISPLAY

When you press a button, ‘ ‘ appears along with selected mode

(VCR, CATV, DVD or STB) and the remote's battery charge status.

Ú MODE button

Selects a target device to be controlled by the Samsung remote

control (i.e., VCR, Cable, DVD players or Samsung STB). If you

change modes, the new mode is momentarily displayed on LCD.

Æ PRE-CH button

(This button is used to control the PRE-CH button on a Samsung Set-Top-Box)

Tunes to the previous channel.

ı SOURCE button

Press to display all of the available video sources

(AV1, AV2, S-Video1, S-Video2,

Component1, Component2, PC, DVI and HDMI).

˜ CH (Channel)/P buttons

(This button is used to control the Channel buttons on a Samsung Set-Top-Box)

Use it to switch channels. Move up or down pages on the menu and TV/Radio list.

¯ INFO button

Press to display information on the PDP Monitor screen.

˘ EXIT button

Press to exit the menu.

¿ Up/Down/Left/Right buttons

Control the cursor in the menu. Continued...

Remote Control

BN68-00852B-00Eng(002~025) 11/22/05 1:45 PM Page 11

¸ SLEEP button

Press to select a preset time interval for automatic shutoff.

˛ SRS button

Selects Trusurround XT mode.

◊ AUTO button

Press to reset automatically screen quality and position in PC

mode.

± P.SIZE button

Select Picture size. (Refer to page 40)

≠ PIP control buttons

PIP: Activates picture in picture. (Refer to page 42)

Size: Press to make the PIP window Large, Small or Double.

Swap: Exchanges the video signal that is currently displayed on

the main screen with the signal in the PIP window.

Source: Press to select one of the available signal sources for the

PIP window.

– SET button

Used during set up of this Samsung remote control, so that it will

work compatibly with other devices (VCR, Cable Box and DVD).

— DNIe button

Activates DNIe Demo. (Refer to page 39)

÷ E.SAVING button

Press to adjust screen brightness according to surrounding

environment. (Refer to page 82)

® VCR, DVD control buttons

Controls VCR tape or DVD disc functions: Stop, Rewind,

Play/Pause, and Fast Forward.

∑ RESET button

If your remote control is not functioning properly, take out the

batteries and press the reset button for about 2~3 seconds.

Re-insert the batteries and try using the remote control again.

12

Installing the Batteries in Your Remote Control

1

Slide the back cover to

open the battery

compartment of the remote

control.

3

Slide the cover back into

place.

2

Install two AAA size batteries.

Make sure to match the “+” and

“-” ends of the batteries with the

diagram inside the compartment.

•

Do not mix battery types, i.e.

alkaline and manganese.

Remote Control Operation Range

You can use your remote control within a distance of 23 feet and an angle of 30 degrees

from the left and right sides of the PDP Monitor’s remote control receiver.

BN68-00852B-00Eng(002~025) 11/22/05 1:45 PM Page 12

13

1

Contact a professional installation service to install the wall bracket.

2

Samsung Electronics is not responsible for any damage to the product or injury to yourself

or others if you elect to perform the wall installation.

3

This product is for installing on cement walls. The product may not stay in place when

installed on plaster or wood.

4

Connect all external devices prior to installing the wall bracket.

5

The package contents and parts supplied for the wall mount are subject to change without

prior notice.

• The dimensions of the product are 78.50(width)x48.58(height)x5.09(depth) inches and the weight

of the product is 141kg (310.85 lbs). The stand-type installation is recommended for the product.

• For installations using the Wall Mount, call 1-800-726-7864 (Samsung Electronics).

• It is recommended that you hire a professional installation service to mount this product on a wall.

• The Wall Mount is sold separately.

Installation Notes

Parts (Wall attachment panel is sold separately.)

Wrench Bolt : 8

1 Left : 1 Right : 1

AccessoriesHingeWall Bracket

Wall Installation Instructions

Refer to the correct installation guide according to your wall bracket.

BN68-00852B-00Eng(002~025) 11/22/05 1:45 PM Page 13

14

1

Remove the screws from the back panel of the main body of the PDP.

Fixing the PDP panel to the wall attachment panel bracket

The shape of the product may vary depending on the model. (The assemblies of the plastic

hanger and the screw are the same)

2

Fix the hinge to the back panel of the

PDP main body using the screws.

(8 Screws)

3

Hook the hinge on the wall mount.

PDP Main Body

Remove the 8 screws

Hinge

BN68-00852B-00Eng(002~025) 11/22/05 1:45 PM Page 14

PLASMA DISPLAY PANEL

Connections

Connecting a VCR........................................................................16

Connecting a Camcorder..............................................................17

Connecting a DVD Player (480i, 480p)..........................................18

Connecting a DTV Receiver (480p, 720p, 1080i) ..........................19

Connecting a Digital Set-Top Box (480p, 720p, 1080i) ..................20

Connecting a Digital Audio System ................................................22

Connecting to an Analog Amplifier ................................................23

Connecting to a Subwoofer Speaker ..............................................24

BN68-00852B-00Eng(002~025) 11/22/05 1:45 PM Page 15

16

Connecting a VCR

Connecting a VCR to the Video or S-Video/Audio jack

Connect the Video/Audio cables between the VIDEO or S-VIDEO/AUDIO input jacks on the

PDP Monitor and VIDEO or S-VIDEO/AUDIO output jacks on the VCR.

(Note: For better video, use an S-Video cable.)

Note

• Please be sure to match the color coded input terminals and cable jacks.

Videotape Playback:

1. Turn on your PDP Monitor.

2. Turn on your VCR, insert a videotape and press the Play button.

3. Press the SOURCE button to select “Video (AV1 or AV2)” or “S-Video (S-Video1 or S-Video2)”.

How to Connect

PDP Monitor Rear Panel

Power cord

VCR

Audio cable

Video cable

S-Video cable

BN68-00852B-00Eng(002~025) 11/22/05 1:45 PM Page 16

17

Connect a Video/Audio cable between the VIDEO or S-VIDEO/AUDIO input jacks on the PDP

Monitor and the VIDEO or S-VIDEO/AUDIO output jacks on the camcorder.

(Note: For better video, use an S-VIDEO cable.)

Note

• Please be sure to match the color coded input terminals and cable jacks.

Viewing Tapes

1. Turn on your PDP Monitor.

2. Press the SOURCE button to select “Video (AV1 or AV2)” or “S-Video (S-Video1 or S-Video2)”.

3. Turn on your camcorder and set it to video mode. (For details, refer to your camcorder

owner’s instructions.)

4. Set the IN/OUT switch on your camcorder to OUT.

5. Press the Play button on the camcorder.

How to Connect

Viewing camcorder playback

Power cord

S-Video cable

Audio cable

Video cable

Camcorder

PDP Monitor Rear Panel

Side of the PDP Monitor

Connecting a Camcorder

BN68-00852B-00Eng(002~025) 11/22/05 1:45 PM Page 17

18

Connecting a DVD Player (480i, 480p)

Playing DVD

Connect the Y, PB, PR (COMPONENT1, 2) input jacks on the PDP Monitor to the Y, PB, PR

output jacks on the DVD player using a component cable.

Connect the AUDIO L/R (COMPONENT1, 2) input jacks on the PDP Monitor to the AUDIO

output jacks on the DVD player using a audio cable.

Note

• Please be sure to match the color coded input terminals and cable jacks.

To Play DVD:

1. Turn on your PDP Monitor.

2. Turn on your DVD player, insert a DVD disc and press the Play button.

• For an explanation of component video, see your DVD player’s owner’s instructions.

3. Press the SOURCE button to select “Component 1” or “Component 2”.

How to Connect

1

2

PDP Monitor Rear Panel

Audio cable

Component

cable

DVD Player

Power cord

2

1

BN68-00852B-00Eng(002~025) 11/22/05 1:45 PM Page 18

19

Connecting a DTV Receiver (480p, 720p, 1080i)

This PDP Monitor displays the optimum picture in 1080i mode.

Watching DTV

Connect the cable or antenna to the antenna input jack on the DTV.

Connect the Y, P

B, PR (COMPONENT1, 2) or DVI input jack on the PDP Monitor to the Y, PB,

P

R or DVI output jacks on the DTV receiver using a component or DVI cable.

Connect the AUDIO L/R (COMPONENT1, 2 or DVI AUDIO IN) input jacks on the PDP

Monitor with the AUDIO output jacks on the DTV receiver using an audio cable.

Note

• Please be sure to match the color coded input terminals and cable jacks.

To Watch DTV:

1. Turn on your PDP Monitor.

2. Turn on your DTV receiver.

• For an explanation of component video, see your DTV receiver owner’s instructions.

3. Press the SOURCE button to select “Component1”, “Component2” or “DVI”.

How to Connect

1

2

3

PDP Monitor Rear Panel

DTV Receiver

Audio cable

Component

cable

Power cord

DVI cable

1

2

3

BN68-00852B-00Eng(002~025) 11/22/05 1:45 PM Page 19

20

Connecting a Digital Set-Top Box

(480p, 720p, 1080i)

Connecting to HDMI (High Definition Multimedia Interface)

Connect the cable or antenna to the antenna input jack on the DTV.

Connect the HDMI input jack on the PDP Monitor with the HDMI output jack on the DTV Set-Top

Box using an HDMI cable.

Note

• Please make sure the HDMI source’s (Set-Top Box) power is on before selecting HDMI from the

“Source List” on the PDP Monitor.

To Watch DTV:

1. Turn on your PDP Monitor.

2. Turn on your DTV receiver.

• For an explanation of HDMI video, see your DTV receiver owner’s instructions.

3. Press the SOURCE button on your to select “HDMI”.

How to Connect

1

2

PDP Monitor Rear Panel

DTV Set-Top Box

HDMI cable

Power cord

2

1

BN68-00852B-00Eng(002~025) 11/22/05 1:45 PM Page 20

Page is loading ...

Samsung HP-R8082 User manual

Samsung HP-R8082 User manual

Related papers

Other documents