Quick Installation Guide
Remove the four mounting screws to swap
mounting trays if required.
3
Ensure the Lightning
TM
connector is pulled out
before installing the iPad.
5
Install the iPad by inserting the top side first and
then Lightning connector side.
Insert the lightning connector into the iPad and
fasten the locking screw, if desired.
6
To eject the iPad from the dock, pull the Lightning
connector cap out first and then press the eject
button.
Elo reserves the right to change or update, without notice, any information contained herein; to change, without notice, the design, construction, materials, processing or specifications of any products; and to discontinue or limit production or distribution
of any products. Elo, the Elo logo are either trademarks or registered trademarks of Elo Touch Solutions, Inc. iPad®, iPad Air
TM
, iPad Air 2 and iPad Pro
TM
are trademarks of Apple Inc., registered in the U.S. and other countries. © 2017 Elo Touch Solutions, Inc. All
rights reserved. 17091AEM00016
2
iPad and iPad Air trays are available and labeled in
the box. Install the correct tray for your iPad.
1
4
iPad®
5
th
Generation
32GB 128GB
iPad Pro
TM
(12.9-inch)
32GB 128GB
256GB
iPad Pro
(9.7-inch)
32GB 128GB
256GB
iPad Air
TM
2
16GB 32GB
64GB 128GB
iPad Air
16GB 32GB
64GB 128GB
iPad
4
th
Generation
16GB 32GB
64GB 128GB
Eject Button
4x mounting
screws
iPad
iPad Air