Texas Instruments TAS5404Q1EVM User guide

Texas Instruments
Brand
Texas Instruments
Model
TAS5404Q1EVM
Type
User guide
User's Guide
SLOU427–October 2015
TAS5404Q1EVM User's Guide
1 Introduction
This user's guide describes the operation of the TAS5404Q1EVM. The TAS5404Q1EVM utilizes the
PurePath Console 3 graphical user interface with the TAS5404Q1EVM plugin.
2 Hardware Overview
The hardware consists of two pcbs that are soldered together through a dual row connector. The main
board incorporates a TAS1020B for the USB interface through a micro USB connector. A 3.3-Vdc linear
regulator provides 3.3 Vdc for the system. The TAS1020B converts the USB protocol to the appropriate
I
2
C address and data. The audio signals are provided through the 3.5-mm female jacks. There are two
jumpers, J3 and J4 to short the two 3.5-mm jacks so only one stereo pair is needed to provide signal to all
four channels of the TAS5404-Q1. Connect the provided USB cable to J9 and the PC. The USB does not
provide audio for this EVM.
The power and speaker connections are through the connectors J8 and J5 with screw terminal that accept
#22 awg wire. Use two wires for each power connections.
1
SLOU427–October 2015 TAS5404Q1EVM User's Guide
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated
Hardware Overview
www.ti.com
Figure 1. TAS5404Q1EVM (Heatsink removed for clarity)
2
TAS5404Q1EVM User's Guide SLOU427–October 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated
www.ti.com
Graphical User Interface and Connecting
3 Graphical User Interface and Connecting
The Graphical User Interface (GUI) utilizes our Purepath Console 3 (PPC3) platform. Download the GUI
from http://www.ti.com/tool/PUREPATHCONSOLE.
The TAS5404Q1EVM GUI is downloaded through the PPC3 platform. Any updates will automatically
display for download. Connect the PC to the internet to use this function.
Figure 2 displays the GUI. Connect the GUI to the EVM by clicking the “connect” button at the bottom left
of interface. Upon a successful connection the small circle will turn green and the “connect” button will
disappear.
Figure 2. TAS5404 EVM GUI Home Page
3.1 Register Map Page
Click on the "Register Map" button on the Home Page to display the register map of the TAS5404-Q1
device. Opening the page reads all registers and populates the registers with the TAS5404-Q1 register
defaults.
Figure 3 displays the Register Map Page. Click on the register to display the description in the Fields
column. In the Register Map column, the pink values are read only, and the black values can be changed
and written to the device. Double click on a black value to change its state and write the value to the
device. Reference the TAS5404-Q1 datasheet, SLOS918, for complete descriptions of the registers and
their functions.
Click on the “TAS5404 EVM Home” text above the Register Map column to return the Home page.
3
SLOU427–October 2015 TAS5404Q1EVM User's Guide
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated
Graphical User Interface and Connecting
www.ti.com
Figure 3. Register Map Page
3.2 Device Control Page
Enter the Device Control Page by clicking on the Device Control box on the Home Page. The page shown
by Figure 4 will display. This page has buttons that control certain functions of the TAS5404-Q1 device.
Figure 4. Device Control Page
4
TAS5404Q1EVM User's Guide SLOU427–October 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated
www.ti.com
Board Layouts and Schematics
4 Board Layouts and Schematics
4.1 Main Board Layout
Figure 5. Main PCB Layout, Top View
5
SLOU427–October 2015 TAS5404Q1EVM User's Guide
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated
Board Layouts and Schematics
www.ti.com
4.2 TAS5404 Board Layout
Figure 6. Amplifier PCB Layout, Top View
6
TAS5404Q1EVM User's Guide SLOU427–October 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated
www.ti.com
Board Layouts and Schematics
Figure 7. Amplifier PCB Layout, Bottom View
7
SLOU427–October 2015 TAS5404Q1EVM User's Guide
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated
4.7µF
50V
C34
0.082µF
50V
C35
2200pF
50V
C36
GNDGNDGNDGND
VIN
GND
VIN RANGE = 5.6-18V
4
1
2
3
J8
470µF
C17
470µF
C18
470µF
C19
GND GND
PVDD
10uH 7.2A
L1
10µF
C38
0.1µF
16V
C37
GND
0.1µF
50V
C39
47µF
10V
C40
GND GND GND
3.3V
GND
IN
1
OUT
3
4
U3
TL760M33QKVURQ1
GND
PVDD
L2
10µF
10V
C32
1µF
6.3V
C33
GND
3.3V
0.1µF
16V
C20
0.1µF
16V
C23
0.1µF
16V
C27
0.1µF
16V
C28
0.1µF
16V
C29
0.1µF
16V
C30
Green
2 1
D4
220
R9
GND
5
4
1
2
3
6
7
8
J5
TP2
GND
TP1
GND
GND GND
4.99k
R16
4.99k
R17
27.4
R24
27.4
R23
1.50k
R22
47pF
C22
47pF
C21
GND
3
1
2
Q1
15.0k
R21
100pF
C25
GND GND
GND
3.3V
GNDSDA
SCL
10.0k
R18
GND
R10
0
R15
3.3V
3.3V
3.3V 3.3V
GND
3.3V
3.3V
5V-USB1
PUR
DP
DM
0.1µF
16V
C31
0.1µF
16V
C26
GND
3.3V
100k
R26
GND
GND
A0
1
A1
2
A2
3
VSS
4
SDA
5
SCL
6
WP
7
VCC
8
U1
24LC512-I/ST
(0xA0)
TP5
GND
6
4
5
13
S1
GND
TP3
SCL
TP4
SDA
3.09k
R25
1000pF
C24
1
2
J7
DISABLE OSC
100k
R29
3.3V
VCC
4
E/D
1
GND
2
OUT
3
6MHz
Y1
GND
SCL
SDA
Orange
D2 STANDBY
Red
D5 FAULT
470
R19
470
R20
470
R27
FAULT
CLIP/OTW
STBY
3.3V
Red
D1 CLIP/OTW
Blue
D3 USB-LOCK
470
R28
USB-LOCK
RESET-USB
3
2
1
J2
IN3/4
1200pF
C7
1200pF
C8
GND GND
3
2
1
J1
IN1/2
49.9k
R11
49.9k
R12
GND GND
0.47µF
C1
0.47µF
C2
499
R1
499
R5
499
R2
499
R6
GND
IN1
IN2
GND GND
GND GND
GND
49.9k
R13
49.9k
R14
1200pF
C10
1200pF
C9
0.47µF
C3
0.47µF
C4
499
R3
499
R7
499
R4
499
R8
IN3
IN4
1
2
J4
PVDD
SCL
SDA
FAULT
CLIP/OTW
STBY
IN4
IN2
IN3
IN1
OUT2+
OUT2-
GND GND
OUT1+
OUT1-
OUT2+
OUT2-
0.01µF
C16
0.01µF
C15
0.01µF
C14
0.01µF
C13
0.01µF
C12
0.01µF
C11
0.01µF
C6
0.01µF
C5
GND
1
2
J3
3.3V
OUT4-
OUT4+
OUT3-
OUT3+
OUT1+
OUT1-
OUT4-
OUT4+
OUT3-
OUT3+
TP6
3.3V
3.3V
1
3
5 6
4
2
7
9 10
8
1211
1413
1615
1817
2019
2221
2423
2625
2827
J6
DNP
DNP
VBUS
1
D-
2
D+
3
ID
4
GND
5
6
7
8
9
J9
USB-IN
PLLFILO
1
AVDD
2
MCLKI
3
DVSS
4
PUR
5
DP
6
DM
7
DVDD
8
MRESET
9
TEST
10
EXTEN
11
RSTO
12
P3-0
13
P3-1
14
P3-2/XINT
15
DVSS
16
P3-3
17
P3-4
18
P3-5
19
NC
20
DVDD
21
NC
22
P1-0
23
P1-1
24
P1-2
25
P1-3
26
P1-4
27
DVSS
28
P1-5
29
P1-6
30
P1-7
31
CSCHNE
32
DVDD
33
CSYNC
35
CDATI
36
CSCLK
37
CDATO
38
MCLKO1
39
MCLKO2
40
RESET
41
VREN
42
SDA
43
SCL
44
AVSS
45
XTALO
46
XTALI
47
PLLFILI
48
CRESET
34
U2
TAS1020BPFB
Board Layouts and Schematics
www.ti.com
4.3 Main Board Schematic
Figure 8. Main PCB Schematic
8
TAS5404Q1EVM User's Guide SLOU427–October 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated
1µF
C27
1µF
C28
PVDD
GND GND
GND
GND GND
GND
PVDD
1µF
C7
1µF
C8
PVDD
GND
249
R12
2.2µF
C23
GND
20.0k
R2
GND
0.1µF
C5
0.1µF
C4
0.22µF
C11
33.0
R1
33.0
R3
1 2
3 4
5 6
7 8
9 10
11 12
13 14
15
17
19
21
23
25
27
16
18
20
22
24
26
28
J1
FAULT
CLIP_OTW
STANDBY
IN1_P
IN2_P
IN3_P
IN4_P
IN_M
FAULT
CLIP_OTW
STANDBY
IN1_PIN2_P
IN3_P
IN4_P
GND GND
SCL
SDA
OUT2-
OUT2+
OUT3-
OUT3+
OUT4-
OUT4+
470pF
C15
5.6
R4
GND
OUT1_P
OUT1_M
OUT2_P
OUT2_M
OUT3_P
OUT3_M
OUT4_P
OUT4_M
5.6
R5
470pF
C16
GND
GND GND
10µH 3.7A
L4
GND GND
GND GND
GND GND
470pF
C17
5.6
R6
GND
5.6
R7
470pF
C18
GND GND GND GND GND
PVDD
OUT1-
OUT1+
470pF
C20
5.6
R9
5.6
R8
470pF
C19
5.6
R10
470pF
C21
470pF
C22
5.6
R11
OUT2-
OUT2+
OUT3-
OUT3+
OUT4-
OUT4+
OUT1-
OUT1+
0.47µF
C3
0.47µF
C2
0.47µF
C10
0.47µF
C9
0.47µF
C14
0.47µF
C13
0.47µF
C26
0.47µF
C25
0.68µF
C24
0.68µF
C12
0.68µF
C6
0.68µF
C1
1µF
C29
1µF
C30
10µH
3.7A
L2
10µH
3.7A
L1
10µH
3.7A
L3
10µH
3.7A
L5
10µH
3.7A
L7
10µH
3.7A
L6
10µH
3.7A
L8
MUTE
2
STANDBY
4
SCL
64
D_BYP
5
CLIP_OTW
6
IN1_P
13
IN2_P
15
REXT
10
IN_M
18
A_BYP
11
IN3_P
19
IN4_P
20
OUT4_P
33
OUT4_M
34
OUT3_P
36
OUT3_M
37
CPC_BOT
40
CP
41
CPC_TOP
42
OUT2_P
44
OUT2_M
45
OUT1_P
47
OUT1_M
48
OSC_SYNC
61
FAULT
1
SDA
63
I2C_ADDR
62
U1A
TAS5404PHD
GND
3
GND
7
GND
8
GND
9
GND
12
GND
14
GND
16
GND
17
GND
21
GND
22
GND
23
GND
24
GND
25
GND
26
PVDD
27
PVDD
28
PVDD
29
GND
30
GND
31
GND
32
GND
35
GND
38
GND
39
GND
43
PVDD
52
PVDD
53
PVDD
54
GND
46
GND
49
GND
50
GND
51
GND
55
GND
56
GND
57
GND
58
GND
59
GND
60
U1B
TAS5404PHD
GND
1
2
H9
www.ti.com
Board Layouts and Schematics
4.4 TAS5404 Board Schematic
Figure 9. Amplifier PCB Schematic
9
SLOU427–October 2015 TAS5404Q1EVM User's Guide
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated
Bill of Materials
www.ti.com
5 Bill of Materials
Table 1. Main PCB, Bill of Materials
Designator Quantity Value Description Package Reference Part Number Manufacturer
!PCB 1 Printed Circuit Board AIP056 Any
C1, C2, C3, C4 4 0.47 µF CAP, CERM, 0.47 µF, 16 1206 GRM319R71C MuRata
V, ± 10%, X7R, 1206 474KA01D
C5, C6, C11, 8 0.01 µF CAP, CERM, 0.01 µF, 25 0603 GRM188R71E MuRata
C12, C13, V, ± 10%, X7R, 0603 103KA01D
C14, C15, C16
C7, C8, C9, 4 1200 pF CAP, CERM, 1200 pF, 50 0603 GRM188R71H MuRata
C10 V, ± 10%, X7R, 0603 122KA01D
C17, C18, C19 3 470 µF CAP, AL, 470 µF, 35 V, ± 10 mm × 16 mm EEU- Panasonic
20%, TH FR1V471B
C20, C23, 9 0.1 µF CAP, CERM, 0.1 µF, 16 0402 GRM155R71C MuRata
C26, C27, V, ±10%, X7R, 0402 104KA88D
C28, C29,
C30, C31, C37
C21, C22 2 47 pF CAP, CERM, 47 pF, 25 0402 GRM1555C1E MuRata
V, ± 5%, C0G/NP0, 0402 470JA01D
C24 1 1000 pF CAP, CERM, 1000 pF, 50 0402 GRM1555C1H MuRata
V, ± 5%, C0G/NP0, 0402 102JA01D
C25 1 100 pF CAP, CERM, 100 pF, 50 0402 GRM1555C1H MuRata
V, ± 5%, C0G/NP0, 0402 101JA01D
C32 1 10 µF CAP, CERM, 10 µF, 10 0603 C1608X5R1A1 TDK
V, ± 20%, X5R, 0603 06M
C33 1 1 µF CAP, CERM, 1 µF, 6.3 V, 0402 C1005X5R0J1 TDK
± 20%, X5R, 0402 05M
C34 1 4.7 µF CAP, CERM, 4.7 µF, 50 1210 GRM32ER71H MuRata
V, ± 10%, X7R, 1210 475KA88L
C35 1 0.082 µF CAP, CERM, 0.082 µF, 0805 08055C823KA AVX
50 V, ± 10%, X7R, 0805 T2A
C36 1 2200 pF CAP, CERM, 2200 pF, 50 0805 GRM2165C1H MuRata
V, ± 5%, C0G/NP0, 0805 222JA01D
C38 1 10 µF CAP, CERM, 10 µF, 35 1206 GMK316AB71 Taiyo Yuden
V, ± 10%, X7R, 1206 06KL
C39 1 0.1 µF CAP, CERM, 0.1 µF, 50 0603 GCM188R71H MuRata
V, ± 10%, X7R, 0603 104KA57D
C40 1 47 µF CAP, CERM, 47 µF, 10 1206 GRM31CR61A MuRata
V, ± 10%, X5R, 1206 476KE15L
D1, D5 2 Red LED, Red, SMD LED, 1 mm × 0.2 mm SML- Rohm
× 0.6 mm P12UTT86
D2 1 Orange LED, Orange, SMD Orange LED SML- Rohm
P12DTT86
D3 1 Blue LED, Blue, SMD Blue LED SMLP12BC7T Rohm
T86
D4 1 Green LED, Green, SMD LED, 1 mm × 0.2 mm SML- Rohm
× 0.6 mm P12PTT86
H1, H2, H3, H4 4 MACHINE SCREW PAN Machine Screw, 4-40, PMSSS 440 B&F Fastener
PHILLIPS 4-40 1/4" 0025 PH Supply
H5, H6, H7, 5 HEX STANDOFF 4-40 HEX STANDOFF 4- 2201 Keystone
H8, H10 ALUMINUM 1/4" 40 ALUMINUM 1/4"
H9 1 MACHINE SCREW PAN Machine Screw, 4-40, PMS 440 0050 B&F Fastener
PHILLIPS 4-40x1/2" SS 1/2" PH Supply
J1, J2 2 Audio Jack, 3.5 mm, Audio Jack SMD SJ-3523-SMT CUI Inc.
Stereo, R/A, SMT
J3, J4, J7 3 Header, 100 mil, 2 × 1, Header, 2 PIN, 100 PEC02SAAN Sullins
Tin, TH mil, Tin Connector
Solutions
10
TAS5404Q1EVM User's Guide SLOU427–October 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated
www.ti.com
Bill of Materials
Table 1. Main PCB, Bill of Materials (continued)
Designator Quantity Value Description Package Reference Part Number Manufacturer
J5 1 Terminal Block, 3. 5 mm, Terminal Block, 3.5 ED555/8DS On-Shore
8-Pos, TH mm, 8-Pos, TH Technology
J8 1 Terminal Block, 6 A, 3.5 14 mm × 8.2 mm × ED555/4DS On-Shore
mm Pitch, 4-Pos, TH 6.5 mm Technology
J9 1 Connector, Receptacle, Connector, USB DX4R205JJAR JAE
Micro-USB Type AB, R/A, Micro AB 1800 Electronics
Bottom Mount SMT
L1 1 10 uH Inductor, Shielded, 10 10.8 mm × 10 mm DFEG10040D- Toko
µH, 7.2 A, 0.027 Ω, SMD 100M
L2 1 300 Ω Ferrite Bead, 300 Ω @ 0806 NFZ2MSM301 MuRata
100 MHz, 3.1 A, 0806 SN10L
Q1 1 0.3 V Transistor, NPN, 40V, SOT-23 MMBT2222A Fairchild
0.15A, SOT-23 Semiconductor
R1, R2, R3, 8 499 RES, 499, 1%, 0.125 W, 0805 CRCW080549 Vishay-Dale
R4, R5, R6, 0805 9RFKEA
R7, R8
R9 1 220 RES, 220, 5%, 0.1 W, 0603 CRCW060322 Vishay-Dale
0603 0RJNEA
R10, R26, R29 3 100 k RES, 100k Ω, 1%, 0.063 0402 CRCW040210 Vishay-Dale
W, 0402 0KFKED
R11, R12, 4 49.9 k RES, 49.9 k, 1%, 0.1 W, 0603 CRCW060349 Vishay-Dale
R13, R14 0603 K9FKEA
R15 1 0 RES, 0, 5%, 0.1 W, 0603 0603 CRCW060300 Vishay-Dale
00Z0EA
R16, R17 2 4.99 k RES, 4.99k Ω, 1%, 0.063 0402 CRCW04024K Vishay-Dale
W, 0402 99FKED
R18 1 10.0 k RES, 10.0 k, 1%, 0.063 0402 CRCW040210 Vishay-Dale
W, 0402 K0FKED
R19, R20, 4 470 RES, 470, 5%, 0.1 W, 0603 CRCW060347 Vishay-Dale
R27, R28 0603 0RJNEA
R21 1 15.0 k RES, 15.0k Ω, 1%, 0.063 0402 CRCW040215 Vishay-Dale
W, 0402 K0FKED
R22 1 1.50 k RES, 1.50k Ω, 1%, 0.063 0402 CRCW04021K Vishay-Dale
W, 0402 50FKED
R23, R24 2 27.4 RES, 27.4 Ω, 1%, 0.063 0402 CRCW040227 Vishay-Dale
W, 0402 R4FKED
R25 1 3.09 k RES, 3.09k Ω, 1%, 0.063 0402 CRCW04023K Vishay-Dale
W, 0402 09FKED
S1 1 Switch, SPDT, On-On, 2 Switch, 7 mm × 4.5 200USP1T1A1 E-Switch
Pos, TH mm M2RE
SH1, SH2 2 1 × 2 Shunt, 100 mil, Gold Shunt 969102-0000- 3M
plated, Black DA
TP1, TP2 2 Black Test Point, Multipurpose, Black Multipurpose 5011 Keystone
Black, TH Testpoint
TP3, TP4 2 Orange Test Point, Miniature, Orange Miniature 5003 Keystone
Orange, TH Testpoint
TP5 1 Black Test Point, Miniature, Black Miniature 5001 Keystone
Black, TH Testpoint
TP6 1 Red Test Point, Miniature, Red Miniature 5000 Keystone
Red, TH Testpoint
U1 1 EEPROM, 512 KBIT, 400 TSSOP-8 24LC512-I/ST Microchip
KHZ, 8TSSOP
U2 1 TAS1020BP IC, USB Streaming PQFP48 TAS1020BPFB TI
FB Controller
11
SLOU427–October 2015 TAS5404Q1EVM User's Guide
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated
Bill of Materials
www.ti.com
Table 1. Main PCB, Bill of Materials (continued)
Designator Quantity Value Description Package Reference Part Number Manufacturer
U3 1 Single Output Automotive KVU0003A TL760M33QK Texas
LDO, 500 mA, Fixed 3.3 VURQ1 Instruments
V Output, 3.8 to 26 V
Input, 3-pin PFM (KVU),
–40 to 125 degC, Green
(RoHS& no Sb/Br)
Y1 1 Oscillator, 6 MHz, 3.3 V, 2.5 mm × 1 mm × 2.5 625L3I006M00 CTS
SMD mm 000 Electrocompon
ents
FID1, FID2, 0 Fiducial mark. There is Fiducial N/A N/A
FID3 nothing to buy or mount.
J6 0 Receptacle, 2.54 mm, 14 Receptacle, 2.54 mm, PPTC142LFB Sullins
× 2, Tin, TH 14 × 2, TH N-RC Connector
Solutions
12
TAS5404Q1EVM User's Guide SLOU427–October 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated
www.ti.com
Bill of Materials
Table 2. Amplifier PCB, Bill of Materials
Designator Quantity Value Description Package Reference Part Number Manufacturer
!PCB1 1 Printed Circuit Board AIP055 Any
C1, C6, C12, 4 0.68 µF CAP, CERM, 0.68 µF, 10 0603 GRM188R71A6 MuRata
C24 V, ± 10%, X7R, 0603 84KA61D
C2, C3, C9, 8 0.47 µF CAP, CERM, 0.47 µF, 25 0603 GRM188R71E4 MuRata
C10, C13, C14, V, ± 10%, X7R, 0603 74KA12D
C25, C26
C4, C5 2 0.1 µF CAP, CERM, 0.1 µF, 16 V, 0402 GRM155R71C1 MuRata
± 10%, X7R, 0402 04KA88D
C7, C8, C27, 6 1 µF CAP, CERM, 1 µF, 50 V, ± 0805 C2012X7R1H10 TDK
C28, C29, C30 10%, X7R, 0805 5K125AB
C11 1 0.22 µF CAP, CERM, 0.22 µF, 16 0402 GRM155R71C2 MuRata
V, ± 10%, X7R, 0402 24KA12D
C15, C16, C17, 8 470 pF CAP, CERM, 470 pF, 50 V, 0603 GRM1885C1H4 MuRata
C18, C19, C20, ± 5%, C0G/NP0, 0603 71JA01D
C21, C22
C23 1 2.2 µF CAP, CERM, 2.2 µF, 10 V, 0805 GRM21BR71A2 MuRata
± 10%, X7R, 0805 25KA01L
H1, H5 2 MACHINE SCREW PAN Machine Screw, 4-40, PMS 440 0050 B&F Fastener
PHILLIPS 4-40 × 1/2" SS 1/2" PH Supply
H2, H6 2 Nut, Hex, 1/4" Thick, #4-40 HNSS440 B&F Fastener
Supply
H3, H7 2 Flat Nylon Washer #4 120 Keystone_3348 3348 Keystone
mil x 250 mil
H4, H8 2 Lock Washer, Internal INTLWSS 004 B&F Fastener
Tooth, #4, Steel Supply
H9 1 Aluminum Heat Sink Bar for Aluminum Heat Sink HEATSINK_TA Texas
TAS54xxEVM Board Bar for TAS54xxEVM S54XXPHD Instruments
Boards
H10 1 TAS5404Q1EVM-MB Used in PnP output TAS5404Q1EV Texas
(AIP055), Mother Board for and some BOM M-MB Instruments
TAS5404Q1EVM reports
J1 1 Header, 2.54 mm, 14 × 2, Header, 2.54 mm, 14 PRPC014DBAN Sullins
Gold, R/A, TH × 2, R/A, TH -M71RC Connector
Solutions
L1, L2, L3, L4, 8 10 uH Inductor, Shielded, Metal 7 mm × 6.6 mm DFEG7030D- Toko
L5, L6, L7, L8 Composite, 10 µH, 3.7 A, 100M
0.07 Ω, SMD
R1, R3 2 33 RES, 33, 5%, 0.063 W, 0402 CRCW040233R Vishay-Dale
0402 0JNED
R2 1 20.0 k RES, 20.0 k, 1%, 0.063 W, 0402 CRCW040220K Vishay-Dale
0402 0FKED
R4, R5, R6, R7, 8 5.6 RES, 5.6, 5%, 0.125 W, 0805 CRCW08055R6 Vishay-Dale
R8, R9, R10, 0805 0JNEA
R11
R12 1 249 RES, 249, 1%, 0.063 W, 0402 CRCW0402249 Vishay-Dale
0402 RFKED
U1 1 Four-Channel Automotive PHD0064B TAS5404PHD Texas
Digital Amplifiers, Instruments
PHD0064B
FID1, FID2, 0 Fiducial mark. There is Fiducial N/A N/A
FID3, FID4, nothing to buy or mount.
FID5, FID6
13
SLOU427–October 2015 TAS5404Q1EVM User's Guide
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer' s risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2015, Texas Instruments Incorporated
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

Texas Instruments TAS5404Q1EVM User guide

Texas Instruments
Brand
Texas Instruments
Model
TAS5404Q1EVM
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents