Sharp LC-32BT8E User manual

Category
LCD TVs
Type
User manual

This manual is also suitable for

LCD COLOUR TELEVISION
LCD-FARBFERNSEHGERÄT
TÉLÉVISION COULEUR À ÉCRAN
À CRISTAUX LIQUIDES (LCD)
TELEVISORE A COLORI LCD
LCD-KLEURENTELEVISIE
TELEVISIÓN EN COLOR LCD
OPERATION MANUAL
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE MANEJO
LC-32GD8E LC-32BT8E LC-37GD8E LC-37BT8E
Printed in Spain
Gedruckt in Spanien
Imprimé en Espagne
Stampato in Spagna
Gedrukt in Spanje
Impreso en España
TINS-C483WJN2
OPERATION MANUAL / BEDIENUNGSANLEITUNG / MODE D’EMPLOI / MANUALE DI ISTRUZIONI / GEBRUIKSAANWIJZING / MANUAL DE MANEJO
LC
-
32GD8E
LC
-
32BT8E
LC
-
37GD8E
LC
-
37BT8E
C483WJN2
1
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
NEDERLANDS
ESPAÑOL
06P05-SP-NG
PIN
Printed on environmentally friendly paper
Auf ökologischem Papier gedruckt
Imprimé sur papier écologique
Stampato su carta ecologica
Afgedrukt op ecologisch papier
Impreso en papel ecológico
(804.0) / [926.0]
(804,0) / [926,0]
(356.0) / [396.0]
(356,0) / [396,0]
(539.0) / [612.0]
(539,0) / [612,0]
(699.6) / [822.6]
(699,6) / [822,6]
(388.5) / [422.9]
(388,5) / [422,9]
(636.0) / [705.0]
(636,0) / [705,0]
(575.0) / [644.0]
(575,0) / [644,0]
119.2
119,2
200.0
200,0
200.0
200,0
115.7
115,7
(394.3) / [463.8]
(394,3) / [463,8]
61.0
61,0
(115.0) / [104.0]
(115,0) / [104,0]
(88.1) / [115.7]
(88,1) / [115,7]
(183.3) / [188.6]
(183,3) / [188,6]
LC-32GD8E / LC-32BT8E / LC-37GD8E / LC-37BT8E
( ) : LC-32GD8E
LC-32BT8E
[ ] : LC-37GD8E
LC-37BT8E
: LC-32GD8E
LC-32BT8E
LC-37GD8E
LC-37BT8E
SPECIAL NOTE FOR USERS IN THE U.K.
The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should
the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or
ASA
and of the same rating
as above, which is also indicated on the pin face of the plug, must be used.
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the
mains plug and fit an appropriate type.
DANGER:
The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of
in a safe manner.
Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious
electric shock may occur.
To fit an appropriate plug to the mains lead, follow the instructions below:
IMPORTANT:
The wires in the mains lead are coloured in accordance with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this product may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black.
The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red.
Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug.
Before replacing the plug cover make sure that:
If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug.
The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
1
OPERATION MANUAL
ENGLISH
Contents …………………………………………………………… 1
Dear SHARP customer …………………………………………… 2
Important Safety Precautions ………………………………… 2
Trademarks ………………………………………………………… 2
Supplied accessories …………………………………………… 3
Quick guide ………………………………………………………… 3
Attaching the stand …………………………………………… 3
Setting the TV ………………………………………………… 4
Inserting the batteries ………………………………………… 5
Using the remote control unit ……………………………… 5
Cautions regarding the remote control unit ………… 5
Remote control unit …………………………………………… 6
TV (Front view) ………………………………………………… 7
TV (Rear view) ………………………………………………… 7
Turning on the power ………………………………………… 8
Standby mode ………………………………………………… 8
Initial auto installation (Analogue) ………………………… 8
Using the analogue programme list ………………………… 8
Initial auto installation (DTV) ………………………………… 8
Using external equipment ……………………………………… 9
Connecting a VCR …………………………………………… 9
Connecting a game console or camcorder ……………… 9
Connecting a DVD player …………………………………… 9
Connecting a decoder ……………………………………… 10
Connecting a PC ……………………………………………… 10
Using AV Link function ……………………………………… 10
Menu operations ………………………………………………… 11
Menu operation buttons ……………………………………… 11
On-Screen Display …………………………………………… 11
Common operations ………………………………………… 12
Picture menu ………………………………………………… 13
AV Mode ………………………………………………… 13
OPC ………………………………………………… 13
Picture adjustments …………………………………… 13
Advanced………………………………………………… 13
Colour Temp. ……………………………………… 14
Black………………………………………………… 14
3D-Y/C ……………………………………………… 14
Monochrome ……………………………………… 14
Film Mode ………………………………………… 14
I/P Setting ………………………………………… 14
Audio menu ………………………………………………… 14
AV Mode ………………………………………………… 14
Audio adjustments ……………………………………… 14
Surround ………………………………………………… 14
Auto Vol. ………………………………………………… 14
Clear Voice ……………………………………………… 14
Power Control menu ………………………………………… 15
No Signal Off …………………………………………… 15
No Operation Off………………………………………… 15
Power Management …………………………………… 15
Setup menu ………………………………………………… 15
Auto Installation ………………………………………… 15
Programme Setup ……………………………………… 15
Auto Search………………………………………… 15
Manual Adjust ……………………………………… 16
Fine …………………………………………… 16
Colour sys. …………………………………… 16
Sound sys. (Broadcasting system) ………… 16
Label ………………………………………… 16
Skip …………………………………………… 16
Decoder ……………………………………… 16
Lock …………………………………………… 16
Sort ………………………………………………… 16
Erase Programme ………………………………… 16
Child Lock ……………………………………………… 17
Contents
Input Label ……………………………………………… 17
Fine Sync. ……………………………………………… 17
Position ………………………………………………… 18
WSS (Wide Screen Signalling) ………………………… 18
4:3 Mode ………………………………………………… 18
Rotate ………………………………………………… 18
Language ………………………………………………… 18
Supply Voltage ………………………………………… 18
Option menu ………………………………………………… 18
Audio Only ……………………………………………… 18
DNR (Digital Noise Reduction) ………………………… 19
HDMI Setup ……………………………………………… 19
Input Select ……………………………………………… 19
Quick Shoot ……………………………………………… 19
Colour System …………………………………………… 19
Demo ………………………………………………… 19
Useful features …………………………………………………… 20
WIDE MODE ………………………………………………… 20
Still image ………………………………………………… 21
Teletext function ……………………………………………… 21
DTV menu operations …………………………………………… 22
DTV menu operation buttons ……………………………… 22
DTV On-Screen Display ……………………………………… 22
DTV common operations …………………………………… 22
About using the character set screen ………………… 23
Language ………………………………………………… 23
Programme Setup …………………………………………… 23
Favourite …………………………………………… 24
Lock ………………………………………………… 24
Move ………………………………………………… 24
Move To …………………………………………… 24
Skip ………………………………………………… 24
Select ……………………………………………… 25
Erase ……………………………………………… 25
Label………………………………………………… 25
View ………………………………………………… 25
Installation ………………………………………………… 25
Auto Installation ………………………………………… 25
Carrier Scan……………………………………………… 25
Carrier Setup …………………………………………… 26
System Setup ………………………………………………… 26
OSD Setup ……………………………………………… 26
Child Lock ……………………………………………… 27
Accessories ………………………………………………… 27
Software Version ………………………………………… 27
Software Upgrade ……………………………………… 27
Common Interface …………………………………………… 28
Inserting a CA card …………………………………… 28
Supplying power to the antenna …………………………… 28
Useful features (DTV) …………………………………………… 29
About EPG ………………………………………………… 29
Using the EPG …………………………………………… 29
Using the EPG Timer …………………………………… 29
Using the ESG ………………………………………………… 30
Using the digital programme list …………………………… 30
Viewing a service banner …………………………………… 30
Using the multi audio function ……………………………… 31
Displaying subtitles …………………………………………… 31
Using the MHEG5 application (UK only) …………………… 31
Appendix …………………………………………………………… 32
Troubleshooting ……………………………………………… 32
PC compatibility chart ……………………………………… 33
RS-232C port specifications ………………………………… 33
Specifications ………………………………………………… 35
Optional accessories ………………………………………… 35
End of life disposal …………………………………………… 36
The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from
the actual operations.
The examples used throughout this manual are based on the LC-32GD8E model.
The factory preset PIN is “1234”.
ENGLISH
TV/AV only PC onlyAV only
these icons used throughout this manual indicate
the menu item can be set or adjusted only in the
selected input mode.
TV/DTV/AV only
:
TV only
LC-32GD8E_GB_a 06.5.1, 0:06 PM1
2
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-
free operation of your product, please read the Important Safety Precautions carefully before using this product.
Dear SHARP customer
Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the
product. Do not use liquid cleaners or aerosol cleaners.
Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub,
swimming pool and in a wet basement.
Do not place vases or any other water-filled containers on this product.
The water may spill onto the product causing fire or electric shock.
Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can
cause the product to fall, resulting in serious personal injuries as well as damage to the product.
Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with
the product. When mounting the product on a wall, be sure to follow the manufacturer’s
instructions. Use only the mounting hardware recommended by the manufacturer.
When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops,
excessive force and uneven floor surface can cause the product to fall from the cart.
Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not
cover or block these vents and openings since insufficient ventilation can cause overheating
and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since
they can block ventilation openings. This product is not designed for built-in installation; do not place the product
in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s
instructions are followed.
The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or
impact applied. If the LCD panel is broken, be careful not to be injured by broken glass.
Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other heat-
generating products (including amplifiers).
To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.
Do not display a still picture for a long time, as this could cause an afterimage to remain.
There is power consumption always if main plug is connected.
The LCD panel is a very high technology product, giving you fine picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as
a fixed point of blue, green or red.
This is within product specifications and does not constitute a fault.
Precautions when transporting the TV
When moving the TV, it should always be carried by two people, using both hands, be careful not to apply
pressure to the display.
Important Safety Precautions
“HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.”
The “HD ready” Logo is a trademark of EICTA.
Trademarks
LC-32GD8E_GB_a 06.5.1, 0:06 PM2
3
Supplied accessories
Quick guide
Remote control unit (g1) AC cord (g1)
Pages 5 and 6
Product shape varies in
some countries.
Page 4
“AAA” size battery (g2) ...... Page 5
Cable clamp (g1)
Page 4
Cable tie (g1)
Page 4
3 RCA to 15-pin D-sub
adapter (g1)
Page 9
Operation manual (This publication)
Stand unit (g1)
Page 3
Attaching the stand
Before attaching (or detaching) stand, unplug the AC cord from the AC INPUT terminal.
1 Confirm the 8 screws supplied with the TV.
Short screws (m4)
(used in step 2)
Long screws (m4)
(used in step 4)
2 Attach the two parts of the stand unit to each other
using the 4 short screws as shown.
3 Insert the stand into the opening on the bottom of
the TV.
4 Insert and tighten the 4 long screws on the rear
of the TV as shown.
NOTE
To detach the stand, perform the above steps in reverse order.
Before performing work spread cushioning over the base area to lay the TV on, making sure the area is
completely flat. This will prevent it from being damaged.
LC-32GD8E_GB_a 06.5.1, 0:06 PM3
4
Quick guide
Setting the TV
Bundling the cables
Setting the TV on the wall
Installing the LCD Colour TV requires special skill that should only be performed by qualified service personnel.
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting
or mounting that results in accident or injury.
You can ask a qualified service personnel about using an optional bracket to mount the TV to the wall.
Standard DIN45325 plug
(IEC 169-2)
75-ohm coaxial cable
Antenna
Connect the antenna cable from your antenna-/
cable socket or the (room-/roof) antenna for
antenna input terminal on the back of your TV set
to receive digitally/terrestrially broadcast stations.
An indoor antenna can also be used under good
reception conditions. Passive and active room
antennas are offered commercially. In an active
antenna its power is supplied via the antenna
input terminal.
The supply voltage (5V) must be correspondingly
set under “Supply Voltage”. (See page 18.)
Ferrite Core
The Ferrite Core should be permanently attached
and never removed from the AC cord.
AC cord
Product shape
varies in some
countries.
Cable clampCable tie
Place the TV close
to the AC outlet, and
keep the power plug
within reach.
Ferrite Core
LC-32GD8E_GB_a 06.5.1, 0:06 PM4
5
Quick guide
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
Do not mix batteries of different types. Different types of batteries have different characteristics.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries.
Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any
chemical leakage, wipe thoroughly with a cloth.
The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
30°30°
Remote control sensor
5 m
1 Press and slide the battery cover to open it.
2 Insert two supplied AAA size batteries.
Place batteries with their terminals corresponding
to the (e) and (f) indications in the battery
compartment.
3 Close the battery cover.
Inserting the batteries
Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become
depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.
Using the remote control unit
Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote
control unit and sensor may prevent proper operation.
Cautions regarding the remote control unit
Do not expose the remote control unit to shock.
In addition, do not expose the remote control unit to liquids, and do not
place in an area with high humidity.
Do not install or place the remote control unit under direct sunlight. The
heat may cause deformation of the unit.
The remote control unit may not work properly if the remote control sensor
of the TV is under direct sunlight or strong lighting. In such case, change
the angle of the lighting or TV, or operate the remote control unit closer to
the remote control sensor.
LC-32GD8E_GB_a 06.5.1, 0:06 PM5
6
Remote control unit
Quick guide
12 3 4
7
9
10
15
16
12
8
5
6
11
14
17
13
18
19
21
27
29
30
22
23
25
24
28
26
20
1 B (Standby/On)
Enter standby mode or turn on the
power. (See page 8.)
2 m (Teletext)
Select the TELETEXT mode. (all TV
image, DTV/DATA image, all TEXT
image, TV/TEXT image) (See pages
21 and 31.)
DTV: Select DTV data broadcasting
and TELETEXT.
3 k (Reveal hidden Teletext)
(See page 21.)
4 [ (Subtitle for Teletext)
TV/External: To turn the subtitles on
and off. (See page 21.)
DTV: Display the subtitle selection
screen. (See page 31.)
5 3 (Freeze/Hold)
(See page 21.)
6 1 (Subpage)
(See page 21.)
7 0–9
Set the channel in TV and DTV mode.
Set the page in Teletext mode.
8 A (Flashback)
Press to return to the previous image
in normal viewing mode. (Will not
work while operating in EPG/ESG
screen.)
9 DTV
Press to access DTV mode while
watching other input sources, and
vice versa.
(This button will not work if you were
watching DTV immediately before
turning off the TV. In this case first
select any other input source except
DTV using the b button.)
10 2 (Sound mode)
Select the sound multiplex mode.
(See below.)
11 e (Mute)
Switch the sound on and off.
12 i (k/l) (Volume)
i (k) Increase the volume.
i (l) Decrease the volume.
13 LIST
DTV: Display the programme list.
14 DTV MENU
Display DTV Menu screen.
15 END
Exit the menu screen.
16 truD
This button is not available in case of
using LC-32/37GD8E/BT8E models.
17 SLEEP
Set the sleep timer on (in units of 30
min. up to max. 2 hr. 30 min.) and off.
18 v (Top/Bottom/Full)
Set the area of magnification in
Teletext mode. (See page 21.)
19 b (INPUT SOURCE)
Select an input source.
(TV, DTV, EXT1, EXT2, EXT3, EXT4,
EXT5) (See page 9.)
20 EPG
DTV: To display EPG (Electronic
Programme Guide) screen.
ESG
DTV: To display ESG (Electronic
Service Guide) screen.
RADIO
DTV: Switch between RADIO and
DTV mode.
21 AV MODE
Select a video setting. (See page 13.)
22 SURROUND
Switch the surround effects on and
off.
23 P (r/s)
TV/DTV: Select the channel.
External: Switch to TV or DTV input
mode.
Teletext: Move to the next/previous
page.
24 p (Display information)
(See pages 21, 29 and 30.)
25 MENU
Display the MENU screen.
(See page 11.)
26 a/b/c/d (Cursor)
Select a desired item on the setting
screen.
OK
Execute a command within the menu
screen.
Display the programme list. (Except
external input.)
27 RETURN
Return to the previous menu screen.
28 Colour (Red/Green/Yellow/Blue)
TELETEXT: Select a page. (See page
21.)
DTV: The coloured buttons are used
to select correspondingly to the
coloured items in the menu screen.
29 OPC
To switch the Optical Picture Control
on and off. (See page 13.)
30 f (WIDE MODE)
Select the wide mode.
(See page 20.)
Selectable items
NICAM STEREO, MONO
NICAM CH A, NICAM CH B,
NICAM CH AB, MONO
NICAM MONO, MONO
Signal
Stereo
Bilingual
Monaural
Selectable items
STEREO, MONO
CH A, CH B, CH AB
MONO
Signal
Stereo
Bilingual
Monaural
NOTE
When no signal is input, the sound mode will display “MONO”.
NICAM TV broadcasts selection A2 TV broadcasts selection
E
Using 2 on the remote control unit
DTV mode:
Press 2 to open the multi audio screen. (See page 31.)
Analogue TV mode:
Each time you press 2, the mode switches as illustrated in the following tables.
LC-32GD8E_GB_a 06.6.15, 10:01 AM6
7
TV (Front view)
Quick guide
TV (Rear view)
NOTE
Only if you use an
active terrestrial
antenna, select
“On (5V)” under
“Supply Voltage”.
(See page 18.)
AC INPUT terminal
OPC sensor
Remote control sensor
B (Standby/On) indicator
OPC indicator
a (Power button)
b (Input button)
i (l/k) (Volume buttons)
P (s/r)
(Programme [channel] buttons)
SLEEP indicator
EXT 2 (RGB) terminal
EXT 3 terminals
Headphone jack
EXT 1 (RGB) terminal
EXT 5 (HDMI/AUDIO)
terminals
Antenna input terminal
(DVB-T 5V=/80 mA)
OUTPUT (Audio) terminals
EXT 4 terminals
RS-232C terminal
COMMON INTERFACE slot
LC-32GD8E_GB_a 06.5.1, 0:07 PM7
8
Quick guide
Turning on the power
Press a on the TV or B on the remote control unit.
NOTE
If you are not going to use this TV for a long period of
time, be sure to remove the AC cord from the power outlet.
Weak electric power is still consumed even when a is
turned off.
In DTV input mode, if the power is turned off immediately
after a setting change from the menu screen, the new
setting or channel information may not be memorised.
Initial auto installation (Analogue)
When the TV powers on for the first time after purchase,
the initial auto installation (Analogue) is invoked. You
can automatically set language, country and channels
in successive operations.
1 Setting the on-screen display language
1 Press a/b/c/d to select the desired language
listed on the screen.
2 Press OK to enter the setting.
2 Setting the country or area
1 Press a/b/c/d to select your country or area
listed on the screen.
2 Press OK to enter the setting.
The programme auto search starts at the same time.
NOTE
The initial auto installation functions only once. If the initial
auto installation is not completed, (ex: When menu screen
disappeared by not operating for a few minutes, when
the power shut down, etc.), try Auto Installation from the
Setup menu. (See page 15.)
The initial auto installation stops by pressing RETURN.
Standby mode
Press B on the remote control unit when the TV is
on.
The TV enters standby mode and the image on the screen
disappears.
The B indicator on the TV changes from green to red.
To completely turn off the power to the TV, unplug the AC
cable from the AC outlet. However, do not unplug the AC
cable unless otherwise instructed.
Off
Red
Green
Display status indicator
Power off
The TV is in standby mode.
The TV is on.
Using the analogue programme list
You can also select the desired channel from
programme list instead of using 0-9 numeric buttons
or P (r/s).
1 Press OK when no other menu screen is
displayed. (Except external input.)
2 Press a/b to select the desired channel to tune
in, and then press OK.
3 Press END to exit the Programme List.
Initial auto installation (DTV)
Digital Video Broadcasting is a transmission scheme.
It is much more than a simple replacement for existing
analogue television transmission. DVB provides more
stations, clearer picture quality and other services
displayed on the screen. It also allows a range of new
features and services including subtitles and multiple
audio tracks.
To watch DTV broadcasts, follow the procedures below
to scan all available services in your area.
1 Press DTV or b to access the DTV mode.
2
Press DTV MENU and the DTV Menu screen displays.
3 Press c/d to select “Installation”.
4 Press a/b to select “Auto Installation”, and then
press OK.
If you have already set the PIN, enter it here. If
not, enter the factory preset PIN “1234”.
See page 17 for setting PIN.
• A confirmation message displays. Press c/d to
select “Yes”, and then press OK to start the search.
5 The TV starts scanning all available DTV and radio
services in your area.
NOTE
The language and country settings used in this operation
are the settings you have already set while executing the
Initial auto installation (Analogue). If you want to
reconfigure the country setting, for instance after moving
to another country, conduct “Auto Installation” from the
Analogue Menu again.
The services are stored according to the channel number
information embedded in the stream (if available). If the
information is not available, the services are stored
according to the order in which they were received.
If you would like to sort the order, it is possible to arrange
it as explained in page 24.
To cancel the scan in progress, press END.
• You cannot select any DTV-related menu items unless
“Auto Installation” has been completed.
After this setting, auto search starts with the following
order.
1 Programme auto search
2 Auto labelling
3 Auto sorting
4 Preset download
You do not need to do anything during the auto search.
The setup menu disappears and you can watch the
programme on channel 1.
LC-32GD8E_GB_a 06.6.15, 10:01 AM8
9
Using external equipment
Setting the input source
To view external source images, select the input source using b on the remote control unit or TV.
NOTE
The cables marked with * are commercially available items.
Connecting a VCR
You can use the EXT 1 or 2 terminals when connecting
a VCR and other audiovisual equipment.
If your VCR supports TV-VCR advanced AV Link
systems, you can connect the VCR to the EXT 2
terminal of the TV using the fully-wired SCART cable.
NOTE
TV-VCR advanced AV Link systems may not be compatible
with some external sources.
TV-OUT from EXT 1 is not outputted when EXT 5 (HDMI)
or DTV is selected as the input.
VCR Decoder
SCART cable* SCART cable*
EXT 1 or 2
VIDEOS-VIDEOL-AUDIO-R
AV OUTPUT
Connecting a DVD player
You can use the EXT 2, 3, 4 or 5 (HDMI) terminals
when connecting to a DVD player and other
audiovisual equipment.
DVD player
EXT 3
A game console, camcorder and some other
audiovisual equipment are conveniently connected
using the EXT 3 terminals.
NOTE
EXT 3: The S-VIDEO terminal has priority over the VIDEO
terminals.
Connecting a game console or
camcorder
Game console Camcorder
or
S-video cable*
Composite
video cable*
AUDIO cable*
EXT 3
VIDEOS-VIDEOL-AUDIO-R
AV OUTPUT
or
AUDIO cable*
S-video cable*
Composite
video cable*
YP
B
(
C
B)
P
R
(
C
R)
COMPONENT
EXT 4
ø 3.5 mm stereo minijack cable*
Component
cable*
3 RCA to 15-pin
D-sub adapter
(Supplied)
DVD player
HDMI cable*
When using an HDMI-DVI conversion
adapter/cable, input the Audio signal
here.
EXT 5
DVD player
NOTE
When connecting an HDMI-DVI conversion adapter/cable
to the HDMI terminal, the image may not come in clearly.
NOTE
EXT 3: The S-VIDEO terminal has priority over the VIDEO
terminals.
LC-32GD8E_GB_a 06.5.1, 0:07 PM9
10
Using external equipment
NOTE
• The cables marked with * are commercially available
items.
The PC input terminals are DDC1/2B-compatible.
Refer to page 33 for a list of PC signals compatible with
the TV.
• Macintosh adaptor may be required for use for some
Macintosh computers.
When connecting to a PC, the correct input signal type is
automatically detected.
This TV incorporates three typical AV Link functions
for smooth connections between the TV and other
audiovisual equipment.
One Touch Play
While the TV is in standby mode, it automatically turns
on and plays back the image from the audiovisual
source (e.g. VCR, DVD).
WYSIWYR (What You See Is What You Record)
When the remote control unit of the connected VCR
has the WYSIWYR button, you can automatically start
recording by pressing the WYSIWYR button.
Preset Download
Automatically transfers the channel preset information
from the tuner on the TV to the one on the connected
audiovisual equipment (e.g. VCR) via the EXT 2
terminal.
NOTE
Refer to operation manuals of each external equipment
for the details.
Only works when the audiovisual equipment is connected
to the EXT 2 terminal on the TV with AV Link via a fully
wired SCART.
The use of the AV Link function is only possible if the TV-
set has enforced a complete auto-installation with the
connected audiovisual equipment (page 8, Initial auto
installation).
The availability of the AV Link function depends on the
audiovisual equipment used. Depending on the
manufacturer and type of equipment used, it is possible
that the described functions may be completely or partially
unusable.
Using AV Link function
Connecting a PC
Use the EXT 4 terminals to connect a PC.
PC
ø 3.5 mm stereo minijack cable*
RGB cable*
PC
RGB/DVI conversion cable*
ø 3.5 mm stereo minijack cable*
EXT 4
EXT 4
Connecting a decoder
You can use the EXT 1 terminal when connecting a
decoder and other audiovisual equipment.
NOTE
In cases when the decoder needs to receive signal from
the TV, make sure to set “Decoder” to “EXT1” in the
Programme Setup “Manual Adjust” menu. (See page 16.)
Do not connect the decoder to the EXT 2 terminal.
Decoder
EXT 1
SCART cable*
LC-32GD8E_GB_b 06.5.1, 0:07 PM10
11
MENU
[
Option
...
Colour System
]
Option
Audio Only
DNR
Input Select
Quick Shoot
Colour System
[On]
[Off]
[CVBS]
[AUTO]
Demo
Menu operations
On-Screen Display
Example
1 Item displayed in yellow
This indicates the item currently selected.
2 Item in brackets
This indicates the current setting for the item.
3 Item displayed in white
This indicates an item can be selected.
4 Item with 4 displayed in grey
This indicates the item cannot be selected for various
reasons.
NOTE
Menu options differ in the selected input modes, but the
operating procedures are the same.
The screens in the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
Menu operation buttons
Use the following buttons on the remote control unit to
operate the menu.
MENU: Press to open or close the menu screen.
a/b/c/d: Press to select a desired item on the screen
or adjust a selected item.
OK: Press to go to the next step or complete the
setting.
RETURN: Press to return to the previous step.
DTV MENU: Press to open or close the DTV Menu screen.
END: Press to exit the menu item.
1
2
3
4
LC-32GD8E_GB_b 06.5.1, 0:07 PM11
12
MENU
[
Picture
]
Picture Audio
Contrast
OPC
AV Mode [STANDARD]
[Off]
Brightness
Colour
Tint
Sharpness
Advanced
Reset
[+30]
[0]
[0]
[0]
[0]
0
–30
–30
–30
–10
+40
+30
+30
+30
+10
Backlight [+6] –8
+8
Menu Operation: B
1 Press MENU and the MENU screen displays.
2 Press c/d to select the desired menu.
3 Press a/b to select the desired menu item
(Example: Backlight, Contrast, etc.).
4 Press c/d to adjust the item to your desired
position.
Select “Reset” to reset all adjustment items to the
factory preset values.
Off
On
On(Display)
MENU
[
Picture
...
Backlight
]
Picture Audio
Contrast
OPC
AV Mode [STANDARD]
[Off]
Brightness
Colour
Tint
Sharpness
Advanced
Reset
[+30]
[0]
[0]
[0]
[0]
0
30
30
30
10
+40
+30
+30
+30
+10
Backlight [+6] 8
+8
1 Press MENU and the MENU screen displays.
2 Press c/d to select the desired menu.
3 Press a/b to select the desired menu item, and
then press OK (Example: AV Mode, OPC, etc.).
Select “Reset” to reset all adjustment items to the
factory preset values.
4 Press a/b/c/d to select the desired item, and
then press OK.
Menu operations
Common operations
Menu Operation: A
Menu Operation: C
1 Press MENU and the MENU screen displays.
2 Press c/d to select the desired menu.
3 Press a/b to select the desired menu item, and
then press OK (Example: Advanced, Demo, etc.).
4 Press a/b to select the desired menu item, and
then press OK (Example: Colour Temp., Black,
etc.).
Select “Reset” to reset all adjustment items to the
factory preset values.
Colour Temp.
Black
3D - Y/C
Monochrome
Film Mode
I/P Setting
High
Mid-High
Middle
Mid-Low
Low
5 Press a/b/c/d to select or adjust the desired
item, and then press OK.
LC-32GD8E_GB_b 06.5.1, 0:07 PM12
13
Picture menu
TitleB
Menu operations
MENU
[
Picture
]
Picture Audio
Contrast
OPC
AV Mode [STANDARD]
[Off]
Brightness
Colour
Tint
Sharpness
Advanced
Reset
[+30]
[0]
[0]
[0]
[0]
0
30
30
30
10
+40
+30
+30
+30
+10
Backlight [+6] 8
+8
Off: The brightness is fixed at the value set in Backlight.
On: Automatically adjusts
On(Display): Displays the OPC effect on the screen while
adjusting the brightness of the screen.
OPC
Menu Operation: A (page 12)
Automatically adjust the brightness of the screen.
NOTE
You can also select OPC options by pressing OPC on the
remote control unit.
• When set to “On”, the TV senses the surrounding light
and automatically adjusts the backlight brightness. Make
sure no object obstructs the OPC sensor, which could
affect its ability to sense surrounding light.
NOTE
• You can also select AV Mode options by pressing AV
MODE on the remote control unit.
• You can adjust the factory preset parameters given in
“STANDARD”, “SOFT”, “ECO” and “DYNAMIC”. The
parameters chosen affect each of the input sources.
The items marked with * are only available for TV/DTV/AV
input mode.
STANDARD: For a highly defined image in a normally
bright room
SOFT*: Creates a softer image.
ECO*: Reduces power consumption.
USER: Allows the user to customise settings as desired.
You can set the mode for each input source.
DYNAMIC*: For a clear-cut image emphasising high
contrast for sports viewing
AV Mode
Menu Operation: A (page 12)
AV Mode gives you five viewing options to choose from
to best match the system environment, which can vary
due to factors like room-brightness, type of programme
watched or the type of image input from external
equipment.
Advanced
Menu Operation: C (page 12)
This TV provides various advanced functions for
optimising the picture quality.
Colour Temp.
Black
3D - Y/C
Monochrome
Film Mode
I/P Setting
High
Mid-High
Middle
Mid-Low
Low
TV/DTV/AV only
Item
Item
Picture adjustments
Menu Operation: B (page 12)
Adjust the picture to your preference with the following
picture settings.
Adjustment items for AV source
c button d button
Backlight The screen dims The screen
brightens
Contrast For less contrast For more contrast
Brightness For less brightness For more
brightness
Red For weaker red For stronger red
Green For weaker green
Blue For weaker blue For stronger blue
Selectable
items
For stronger
green
c button d button
Backlight The screen dims The screen
brightens
Contrast For less contrast For more contrast
Brightness For less brightness For more
brightness
Colour For less colour
intensity
For more colour
intensity
Tint Skin tones
become purplish
Sharpness For less sharpness For more
sharpness
Selectable
items
Skin tones
become greenish
Adjustment items for PC source
LC-32GD8E_GB_b 06.5.1, 0:07 PM13
14
Menu operations
Black
For easier viewing, change the viewing depth by
selecting a level for automatically adjusting the dark
portion of an image.
3D-Y/C
Provide high quality images with minimal dot crawl and
cross colour noise by detecting changes in the image.
Off: No detecting
Standard: Normal adjustment
Fast: Set the optimum image quality for fast-moving
images.
Slow: Set the optimum image quality for slow-moving
images.
NOTE
3D-Y/C may not operate depending on the input signal
type or noisy input signal.
3D-Y/C has even more effect on composite video signals
(CVBS).
Monochrome
For viewing a video in monochrome.
NOTE
When Monochrome is set to “On”, the DTV Menu screen
displays in monochrome.
Film Mode
Automatically detect a film-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each
still film frame for high-definition picture quality.
I/P Setting
Adjust the image and input signal can give you a more
beautiful picture.
Interlace: Display finely detailed images for TV or video,
etc.
Progressive: Display smooth images for still images or
graphics, etc.
Audio menu
Audio adjustments
Menu Operation: B (page 12)
You can adjust the sound quality to your preference
with the following settings.
MENU
[
Audio
]
Audio Power Control
Treble
Bass
Balance
Surround
Reset
[Off]
Auto Vol. [Off]
Clear Voice [Off]
[0]
[0]
15
L
+15
[0] 15
+15
R
AV Mode [STANDARD]
Surround
Menu Operation: A (page 12)
Surround function allows you to enjoy realistic “live”
sound.
NOTE
You can also choose surround effects by pressing
SURROUND on the remote control unit.
AV Mode
Menu Operation: A (page 12)
This option links to AV Mode in the Picture menu. (See
page 13.)
Colour Temp.
Adjust the colour temperature to give the best white
image.
High: White with bluish tone
Mid-High: Intermediate tone between High and Middle
Middle: Natural tone
Mid-Low: Intermediate tone between Middle and Low
Low: White with reddish tone
Auto Vol.
Menu Operation: A (page 12)
Different sound sources, fairly often do not have the
same volume level, for example the changing from
movie to the advertisements. The Automatic Volume
Control (Auto Vol.) solves this problem and equalises
the volume levels.
Clear Voice
Menu Operation: A (page 12)
This function emphasises speech voice against the
background noise for more intelligibility. It is not
recommended for music sources.
NOTE
The I/P Setting is set to “Progressive” when Film Mode is
“On”.
TV/DTV/AV only
Item
Item
Selectable
items
c button d button
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Balance Decrease audio
from the right
speaker
Decrease audio
from the left
speaker
Item
LC-32GD8E_GB_b 06.5.1, 0:07 PM14
15
Setup menu
Auto Installation
You can run Auto Installation again, even after setting
up the preset channels.
1 Press MENU and the MENU screen displays.
2 Press c/d to select Setup.
3 Press a/b to select Auto Installation, and then
press OK.
If you have already set the PIN under Child Lock,
enter it here.
See page 17 for setting PIN.
4 Press c/d to select Ye s , and then press OK.
5 You can set language and country the same as in
the initial auto installation. Follow steps 1 and 2
on page 8.
Programme Setup
This section describes how to set up analogue TV
channels manually.
Menu operations
MENU
[
Setup
]
Setup Option
Child Lock
Auto Installation
Programme Setup
Position
WSS
4:3 Mode [Panorama]
[On]
[Off (0V)]
[Normal]
Supply Voltage
[English]Language
Rotate
Auto Search
You can automatically search for and download TV
channels by performing the procedure below. This is
the same function as from programme auto search to
preset download in Auto Installation.
1 Repeat steps 1 to 4 in Programme Setup.
2 Press c/d to select Ye s , and then press OK.
1 Programme auto search
2 Auto labelling
3 Auto sorting
4 Preset download
1 Press MENU and the MENU screen displays.
2 Press c/d to select Setup.
3 Press a/b to select Programme Setup, and
then press OK.
If you have already set the PIN under Child Lock,
enter it here.
See page 17 for setting PIN.
4 Press a/b to select Auto Search, Manual
Adjust, Sort or Erase Programme, and then
press OK.
Auto Search
Manual Adjust
Sort
Erase Programme
No Yes
Power Control menu
No Signal Off
Menu Operation: A (page 12)
When set to “Enable” the TV will automatically enter the
standby mode if there is no signal input for 15 minutes.
• Five minutes before the TV enters standby mode, the
remaining time displays every minute.
NOTE
• When a TV programme finishes, this function may not
operate.
MENU
[
Power Control
]
Audio Power Control
No Signal Off
No Operation Off
[Disable]
[Disable]
No Operation Off
Menu Operation: A (page 12)
When set to “Enable” the TV will automatically enter the
standby mode if no operations are performed for 3 hours.
• Five minutes before the TV enters standby mode, the
remaining time displays every minute.
Power Management
Menu Operation: A (page 12)
When set, the TV will automatically enter the standby mode.
Off: No power management
Factory preset value.
Mode1: If there is no signal input for 8 minutes, the TV
enters the standby mode.
Even if you start using the PC and the signal
inputs again, the TV stays in standby mode.
The TV turns on again by pressing a on the
TV or B on the remote control unit. (See page
8.)
Mode2: If there is no signal input for 8 seconds, the
TV enters the standby mode.
When you start using the PC and the signal
inputs again, the TV turns on.
The TV turns on again by pressing a on the
TV or B on the remote control unit. (See page
8.)
TV/AV only
TV only
TV only
PC only
TV/DTV/AV only
Item
LC-32GD8E_GB_b 06.5.1, 0:07 PM15
16
Manual Adjust
You can set some channel items manually.
1 Press MENU and the MENU screen displays.
2 Press c/d to select Setup.
3 Press a/b to select Programme Setup, and
then press OK.
If you have already set the PIN under Child Lock,
enter it here.
See page 17 for setting PIN.
4 Press a/b to select Manual Adjust and then
press OK.
5 Press c/d to select Ye s , and then press OK.
6 Press a/b/c/d to select the channel you want
to edit, and then press OK.
The selected channel information displays.
7 Press a/b to select the desired menu item, and
then press OK.
8 Press a/b/c/d to select or adjust.
MENU
[
Setup
...
Programme Setup
]
Fine
Colour sys.
Sound sys.
Label
Skip
Decoder
Lock
[179.25]
[AUTO]
[B/G]
[Off]
[SAT.1]
[Off]
[Off]
179.25 MHz
Menu operations
NOTE
When you exit Programme Setup “Manual Adjust” menu,
preset download automatically runs if you change
information on that menu.
Fine
You can adjust the frequency to your desired position.
NOTE
Adjust while checking the background picture as a
reference.
Instead of pressing c/d to adjust the frequency in step
8 above, you can set by directly entering the frequency
number of the channel with 09.
EXAMPLE
179.25 MHz: Press 1 s 7 s 9 s 2 s 5.
49.25 MHz: Press 4 s 9 s 2 s 5 s OK.
Label
When a TV channel sends its Network Name, the Auto
Installation detects the information and assigns a name
to it. However, you can change individual channel
names.
1 Repeat steps 1 to 7 in Manual Adjust.
Skip
Channels with “Skip” set to “On” are passed over when
using Pr/Ps even if selected while watching the
image from the TV.
Decoder
When connecting a decoder to the unit, you need to
select EXT1.
NOTE
“Off” is factory preset value.
Lock
You can block the viewing of any channel.
NOTE
See page 17 for setting PIN.
When Lock is set to “On” for a channel, “Child lock has
been activated.” displays, and the image and sound of
the channel are blocked.
When pressing OK while “Child lock has been activated.”
displays, PIN input menu will display. Inputting the correct
PIN lifts the child lock temporarily until the power is turned
off.
Colour sys.
Select the optimum colour systems to receive. (AUTO,
PAL, SECAM)
Sound sys. (Broadcasting system)
Select the optimum sound systems (Broadcasting
systems) to receive. (B/G, D/K, I, L, L’)
Sort
Channel positions can be sorted freely.
1 Repeat steps 1 to 4 in Programme Setup.
2 Press c/d to select Ye s , and then press OK.
3 Press a/b/c/d to select the channel you want
to move, and then press OK.
4 Press a/b/c/d to move it to the desired
position, and then press OK.
5 Repeat steps 3 and 4 until all desired channels
are sorted.
Erase Programme
An individual programme can be erased.
1 Repeat steps 1 to 4 in Programme Setup.
2 Press c/d to select Ye s , and then press OK.
3 Press a/b/c/d to select the channel you want
to erase, and then press OK.
A message screen pops up.
4 Press c/d to select Ye s, and then press OK to
erase the selected programme. All the subsequent
programmes move up.
5 Repeat steps 3 and 4 until all desired channels
are erased.
2 Press a/b/c/d to select each character of the
new name for the channel, and then press OK.
3 Repeat step 2 above until the name is fully spelt
out.
The name can be 5 characters or less.
If a channel name is less than 5 characters, select
“END”, then press OK.
LC-32GD8E_GB_b 06.5.1, 0:07 PM16
17
Child Lock
Allow you to use a PIN to protect certain settings from
being accidentally changed.
Changing the PIN
1 Press MENU and the MENU screen displays.
2 Press c/d to select Setup.
3 Press a/b to select Child Lock, and then press
OK.
New PIN
Reconfirm
Change PIN
Reset
4 Enter the 4-digit number as a PIN using 0 9.
5 Enter the same 4-digit number as in step 4 to
confirm.
“The system PIN has been changed successfully”
displays.
NOTE
• To view a locked channel, you must enter a PIN. (See
pages 16 and 27 for locking channels from viewing in
analogue TV and DTV mode.) When you select a locked
channel, a PIN prompt message pops up. Press OK to
display the PIN input window.
Resetting the PIN
Allow you to reset your PIN to the factory preset “1234”.
1 Repeat steps 1 to 3 in Changing the PIN.
2 Enter the PIN.
3 Press a/b to select Reset, and then press OK.
4 Press c/d to select Ye s , and then press OK.
NOTE
As a precautionary measure, make a note of your PIN
on the back of this operation manual, cut it out and
keep it in a safe place that children cannot reach.
See page 32 for resetting the current PIN to the factory
preset “1234” if you lose or forget your PIN.
Menu operations
Input Label
You can assign each input source a label you like.
1 Press b to select the desired input source.
2 Press MENU and the MENU screen displays.
3 Press c/d to select Setup.
4 Press a/b to select Input Label, and then press
OK.
5 Press a/b/c/d to select each character of the
new name for the input source, and then press
OK.
6 Repeat step 5 above until the name is fully spelt
out, and then press OK.
The name can be 6 characters or less.
• If a label name is less than 6 characters, select
“END”, then press OK.
NOTE
You cannot change the label if the input source is TV or
DTV.
TV only
Fine Sync.
Menu Operation: C (Page 12)
Ordinarily, the TV automatically adjusts image positions
coming from PC (Auto Sync. function). In some cases,
however, manual adjustment is needed to optimise the
image.
H-Pos.: Centres the image by moving it to the left or right.
V-Pos.: Centres the image by moving it up or down.
Clock: Adjusts when the image flickers with vertical
stripes.
Phase: Adjusts when characters have low contrast or
when the image flickers.
PC only
NOTE
If you need to adjust the image position, adjust the position
using your PC.
Item
LC-32GD8E_GB_b 06.5.1, 0:07 PM17
18
Menu operations
WSS (Wide Screen Signalling)
Menu Operation: A (Page 12)
WSS allows a television to switch automatically among
the different screen formats.
NOTE
Use WIDE MODE if an image does not switch to the correct
screen format. When the broadcast signal contains no
WSS information, the function will not work even if enabled.
(See page 20.)
Position
Menu Operation: C (Page 12)
For adjusting a picture’s horizontal and vertical
position.
NOTE
Adjustments are stored separately according to input
source.
Depending on the input signal type a position setting may
not be available.
H-Pos.: Centres the image by moving it to the left or right.
V-Pos.: Centres the image by moving it up or down.
Rotate
Menu Operation: A (page 12)
You can set the orientation of the picture.
ABC
ABC
ABC
ABC
[Normal] [Mirror] [Upside
Down]
[Rotate]
WSS signal 4:3 screen
4:3 mode “Panorama”
4:3 mode “Normal”
4:3 Mode
Menu Operation: A (page 12)
The WSS signal has 4:3 auto-switching that allows you
to select between Normal and Panorama.
Normal: Normal range keeping 4:3 or 16:9 aspect ratio
Panorama: Wide image without side bars
Language
Menu Operation: A (page 12)
You can select a language from the Setup menu. Select
from among 13 languages. (Dutch, English, Finnish,
French, German, Greek, Italian, Polish, Portuguese,
Russian, Spanish, Swedish, Turkish)
Supply Voltage
Menu Operation: A (page 12)
Switch on or off the power to the antenna connected
to the antenna input terminal. (See page 4.)
TV/DTV/AV only
TV/DTV/AV only
TV/DTV/AV only
Item
Item
Option menu
Audio Only
Menu Operation: A (page 12)
When listening to music from a music programme, you
can set the TV off and enjoy audio only.
MENU
[
Option
]
Option
Audio Only
DNR
Input Select
Quick Shoot
Colour System
[On]
[Off]
[CVBS]
[AUTO]
Demo
NOTE
“HDMI Setup” is displayed only when “EXT5” is selected
from the INPUT SOURCE menu.
Off: Both screen images and audio are output.
On: Audio is output without screen image.
Item
LC-32GD8E_GB_b 06.5.1, 0:07 PM18
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40

Sharp LC-32BT8E User manual

Category
LCD TVs
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI